phpman > search > (8)

 

apropos

0-9

A

  • a2disconf (8) — enable or disable an apache2 configuration file [man]
  • a2dismod (8) — enable or disable an apache2 module [man]
  • a2dissite (8) — enable or disable an apache2 site / virtual host [man]
  • a2enconf (8) — enable or disable an apache2 configuration file [man]
  • a2enmod (8) — enable or disable an apache2 module [man]
  • a2ensite (8) — enable or disable an apache2 site / virtual host [man]
  • aa-remove-unknown (8) — remove unknown AppArmor profiles [man]
  • aa-status (8) — display various information about the current AppArmor... [man]
  • aa-teardown (8) — unload all AppArmor profiles [man]
  • accessdb (8) — dumps the content of a man-db database in a human read... [man]
  • accton (8) — turns process accounting on or off [man]
  • add-shell (8) — add shells to the list of valid login shells [man]
  • addgnupghome (8) — Create .gnupg home directories [man]
  • addgroup (8) — add a user or group to the system [man]
  • addpart (8) — tell the kernel about the existence of a partition [man]
  • adduser (8) — add a user or group to the system [man]
  • agetty (8) — alternative Linux getty [man]
  • anvil (8postfix) — Postfix session count and request rate control [man]
  • ap (8mh) — nmh parser of RFC 822-style addresses [man]
  • apache2 (8) — Apache Hypertext Transfer Protocol Server [man]
  • apache2ctl (8) — Apache HTTP server control interface [man]
  • apachectl (8) — Apache HTTP server control interface [man]
  • apparmor_parser (8) — loads AppArmor profiles into the kernel [man]
  • apparmor_status (8) — display various information about the current AppArmor... [man]
  • applygnupgdefaults (8) — Run gpgconf --apply-defaults for all users. [man]
  • apt (8) — command-line interface [man]
  • apt-cache (8) — query the APT cache [man]
  • apt-cdrom (8) — APT CD-ROM management utility [man]
  • apt-config (8) — APT Configuration Query program [man]
  • apt-get (8) — APT package handling utility -- command-line interface [man]
  • apt-key (8) — Deprecated APT key management utility [man]
  • apt-mark (8) — show, set and unset various settings for a package [man]
  • apt-secure (8) — Archive authentication support for APT [man]
  • aptitude (8) — high-level interface to the package manager [man]
  • aptitude-curses (8) — high-level interface to the package manager [man]
  • arp (8) — manipulate the system ARP cache [man]
  • arpd (8) — userspace arp daemon. [man]
  • arping (8) — sends arp and/or ip pings to a given host [man]
  • arptables-nft (8) — ARP table administration (nft-based) [man]
  • arptables-nft-restore (8) — Restore ARP Tables (nft-based) [man]
  • arptables-nft-save (8) — dump arptables rules to stdout (nft-based) [man]
  • aspell-autobuildhash (8) — Autobuilding aspell hash files for some dicts [man]
  • atd (8) — run jobs queued for later execution [man]
  • auth-otp (8) — generate HOTP/TOTP secrets for mod_auth_otp ProFTPD mo... [man]

B

  • badblocks (8) — search a device for bad blocks [man]
  • bcache-super-show (8) — Print the bcache superblock [man]
  • biosdecode (8) — BIOS information decoder [man]
  • blkdeactivate (8) — utility to deactivate block devices [man]
  • blkdiscard (8) — discard sectors on a device [man]
  • blkid (8) — locate/print block device attributes [man]
  • blkmapd (8) — pNFS block layout mapping daemon [man]
  • blkzone (8) — run zone command on a device [man]
  • blockdev (8) — call block device ioctls from the command line [man]
  • boltd (8) — thunderbolt device managing system daemon [man]
  • bounce (8postfix) — Postfix delivery status reports [man]
  • bridge (8) — show / manipulate bridge addresses and devices [man]
  • btrfs (8) — a toolbox to manage btrfs filesystems [man]
  • btrfs-balance (8) — balance block groups on a btrfs filesystem [man]
  • btrfs-check (8) — check or repair a btrfs filesystem [man]
  • btrfs-convert (8) — convert from ext2/3/4 or reiserfs filesystem to btrfs ... [man]
  • btrfs-device (8) — manage devices of btrfs filesystems [man]
  • btrfs-filesystem (8) — command group that primarily does work on the whole fi... [man]
  • btrfs-find-root (8) — filter to find btrfs root [man]
  • btrfs-image (8) — create/restore an image of the filesystem [man]
  • btrfs-inspect-internal (8) — query various internal information [man]
  • btrfs-map-logical (8) — map btrfs logical extent to physical extent [man]
  • btrfs-property (8) — get/set/list properties for given filesystem object [man]
  • btrfs-qgroup (8) — control the quota group of a btrfs filesystem [man]
  • btrfs-quota (8) — control the global quota status of a btrfs filesystem [man]
  • btrfs-receive (8) — receive subvolumes from send stream [man]
  • btrfs-replace (8) — replace devices managed by btrfs with other device. [man]
  • btrfs-rescue (8) — Recover a damaged btrfs filesystem [man]
  • btrfs-restore (8) — try to restore files from a damaged btrfs filesystem i... [man]
  • btrfs-scrub (8) — scrub btrfs filesystem, verify block checksums [man]
  • btrfs-select-super (8) — overwrite primary superblock with a backup copy [man]
  • btrfs-send (8) — generate a stream of changes between two subvolume sna... [man]
  • btrfs-subvolume (8) — manage btrfs subvolumes [man]
  • btrfsck (8) — check or repair a btrfs filesystem [man]
  • btrfstune (8) — tune various filesystem parameters [man]

C

  • cache_check (8) — validates cache metadata on a device or file. [man]
  • cache_dump (8) — dump cache metadata from device or file to standard ou... [man]
  • cache_metadata_size (8) — Estimate the size of the metadata device needed for... [man]
  • cache_repair (8) — repair cache binary metadata from device/file to devic... [man]
  • cache_restore (8) — restore cache metadata file to device or file. [man]
  • cache_writeback (8) — writeback dirty blocks to the origin device. [man]
  • cachefilesd (8) — CacheFiles userspace management daemon [man]
  • catman (8) — create or update the pre-formatted manual pages [man]
  • cfdisk (8) — display or manipulate a disk partition table [man]
  • cgconfigparser (8) — setup control group file system [man]
  • cgdisk (8) — Curses-based GUID partition table (GPT) manipulator [man]
  • cgrulesengd (8) — control group rules daemon [man]
  • chcpu (8) — configure CPUs [man]
  • check_forensic (8) — tool to extract mod_log_forensic output from apache lo... [man]
  • checkgid (8) — checks the gid [man]
  • chgpasswd (8) — update group passwords in batch mode [man]
  • chmem (8) — configure memory [man]
  • chpasswd (8) — update passwords in batch mode [man]
  • chpst (8) — runs a program with a changed process state [man]
  • chroot (8) — run command or interactive shell with special root dir... [man]
  • cleanup (8postfix) — canonicalize and enqueue Postfix message [man]
  • cpgr (8) — copy with locking the given file to the password or gr... [man]
  • cppw (8) — copy with locking the given file to the password or gr... [man]
  • cron (8) — daemon to execute scheduled commands (Vixie Cron) [man]
  • cryptdisks_start (8) — wrapper around cryptsetup that parses /etc/crypttab. [man]
  • cryptdisks_stop (8) — wrapper around cryptsetup that parses /etc/crypttab. [man]
  • cryptsetup (8) — manage plain dm-crypt and LUKS encrypted volumes [man]
  • cryptsetup-reencrypt (8) — tool for offline LUKS device re-encryption [man]
  • cryptsetup-ssh (8) — manage LUKS2 SSH token [man]
  • ctrlaltdel (8) — set the function of the Ctrl-Alt-Del combination [man]
  • ctstat (8) — unified linux network statistics [man]

D

  • dcb (8) — show / manipulate DCB (Data Center Bridging) settings [man]
  • dcb-app (8) — show / manipulate application priority table of the DC... [man]
  • dcb-buffer (8) — show / manipulate port buffer settings of the DCB (Dat... [man]
  • dcb-dcbx (8) — show / manipulate port DCBX (Data Center Bridging eXch... [man]
  • dcb-ets (8) — show / manipulate ETS (Enhanced Transmission Selection... [man]
  • dcb-maxrate (8) — show / manipulate port maxrate settings of the DCB (Da... [man]
  • dcb-pfc (8) — show / manipulate PFC (Priority-based Flow Control) se... [man]
  • debugfs (8) — ext2/ext3/ext4 file system debugger [man]
  • defer (8postfix) — Postfix delivery status reports [man]
  • delgroup (8) — remove a user or group from the system [man]
  • deliverquota (8) — deliver to a maildir with a quota [man]
  • deliverquota.maildrop (8) — deliver to a maildir with a quota [man]
  • delpart (8) — tell the kernel to forget about a partition [man]
  • deluser (8) — remove a user or group from the system [man]
  • depmod (8) — Generate modules.dep and map files. [man]
  • devlink (8) — Devlink tool [man]
  • devlink-dev (8) — devlink device configuration [man]
  • devlink-dpipe (8) — devlink dataplane pipeline visualization [man]
  • devlink-health (8) — devlink health reporting and recovery [man]
  • devlink-monitor (8) — state monitoring [man]
  • devlink-port (8) — devlink port configuration [man]
  • devlink-rate (8) — devlink rate management [man]
  • devlink-region (8) — devlink address region access [man]
  • devlink-resource (8) — devlink device resource configuration [man]
  • devlink-sb (8) — devlink shared buffer configuration [man]
  • devlink-trap (8) — devlink trap configuration [man]
  • dhclient (8) — Dynamic Host Configuration Protocol Client [man]
  • dhclient-script (8) — DHCP client network configuration script [man]
  • dirmngr (8) — CRL and OCSP daemon [man]
  • discard (8postfix) — Postfix discard mail delivery agent [man]
  • dkms (8) — Dynamic Kernel Module Support [man]
  • dmeventd (8) — Device-mapper event daemon [man]
  • dmidecode (8) — DMI table decoder [man]
  • dmsetup (8) — low level logical volume management [man]
  • dmstats (8) — device-mapper statistics management [man]
  • dnsblog (8postfix) — Postfix DNS allow/denylist logger [man]
  • do-release-upgrade (8) — upgrade operating system to latest release [man]
  • dosfsck (8) — check and repair MS-DOS FAT filesystems [man]
  • dosfslabel (8) — set or get MS-DOS filesystem label or volume ID [man]
  • dp (8mh) — nmh parser of RFC 822-style dates [man]
  • dpkg-preconfigure (8) — let packages ask questions prior to their installation [man]
  • dpkg-reconfigure (8) — reconfigure an already installed package [man]
  • dump-acct (8) — print an acct file in human-readable format. [man]
  • dump-utmp (8) — print an utmp file in human-readable format. [man]
  • dumpe2fs (8) — dump ext2/ext3/ext4 file system information [man]

E

  • e2freefrag (8) — report free space fragmentation information [man]
  • e2fsck (8) — check a Linux ext2/ext3/ext4 file system [man]
  • e2image (8) — Save critical ext2/ext3/ext4 file system metadata to a... [man]
  • e2label (8) — Change the label on an ext2/ext3/ext4 file system [man]
  • e2mmpstatus (8) — Check MMP status of an ext4 file system [man]
  • e2scrub (8) — check the contents of a mounted ext[234] file system [man]
  • e2scrub_all (8) — check all mounted ext[234] file systems for errors. [man]
  • e2undo (8) — Replay an undo log for an ext2/ext3/ext4 file system [man]
  • e4crypt (8) — ext4 file system encryption utility [man]
  • e4defrag (8) — online defragmenter for ext4 file system [man]
  • ebtables-nft (8) — Ethernet bridge frame table administration (nft-based) [man]
  • ebtables-nft-restore (8) — iptables using nftables kernel api [man]
  • ebtables-nft-save (8) — iptables using nftables kernel api [man]
  • envdir (8) — runs another program with environment modified accordi... [man]
  • envuidgid (8) — runs another program with environment variables indica... [man]
  • era_check (8) — validate era metadata on device or file. [man]
  • era_dump (8) — dump era metadata from device or file to standard output. [man]
  • era_invalidate (8) — Provide a list of blocks that have changed since a par... [man]
  • era_restore (8) — restore era metadata file to device or file. [man]
  • error (8postfix) — Postfix error/retry mail delivery agent [man]
  • ethtool (8) — query or control network driver and hardware settings [man]

F

  • faillock (8) — Tool for displaying and modifying the authentication f... [man]
  • faillog (8) — display faillog records or set login failure limits [man]
  • fatlabel (8) — set or get MS-DOS filesystem label or volume ID [man]
  • fcgistarter (8) — Start a FastCGI program [man]
  • fdisk (8) — manipulate disk partition table [man]
  • fghack (8) — is an anti-backgrounding tool. [man]
  • filefrag (8) — report on file fragmentation [man]
  • findfs (8) — find a filesystem by label or UUID [man]
  • findmnt (8) — find a filesystem [man]
  • fixparts (8) — MBR partition table repair utility [man]
  • flush (8postfix) — Postfix fast flush server [man]
  • fmtdump (8mh) — decode nmh's mh-format(5) files [man]
  • fping (8) — send ICMP ECHO_REQUEST packets to network hosts [man]
  • fping6 (8) — backwards compatibility with fping below version 4.0 [man]
  • fsadm (8) — utility to resize or check filesystem on a device [man]
  • fsck (8) — check and repair a Linux filesystem [man]
  • fsck.btrfs (8) — do nothing, successfully [man]
  • fsck.cramfs (8) — fsck compressed ROM file system [man]
  • fsck.ext2 (8) — check a Linux ext2/ext3/ext4 file system [man]
  • fsck.ext3 (8) — check a Linux ext2/ext3/ext4 file system [man]
  • fsck.ext4 (8) — check a Linux ext2/ext3/ext4 file system [man]
  • fsck.fat (8) — check and repair MS-DOS FAT filesystems [man]
  • fsck.minix (8) — check consistency of Minix filesystem [man]
  • fsck.msdos (8) — check and repair MS-DOS FAT filesystems [man]
  • fsck.vfat (8) — check and repair MS-DOS FAT filesystems [man]
  • fsck.xfs (8) — do nothing, successfully [man]
  • fsfreeze (8) — suspend access to a filesystem (Ext3/4, ReiserFS, JFS,... [man]
  • fstab-decode (8) — run a command with fstab-encoded arguments [man]
  • fstrim (8) — discard unused blocks on a mounted filesystem [man]
  • ftpasswd (8) — manipulates ProFTPD authentication files [man]
  • ftpdctl (8) — ProFTPD control program [man]
  • ftpscrub (8) — scrub the proftpd scoreboard file of stale entries [man]
  • ftpshut (8) — shut down all proftpd servers at a given time [man]
  • ftpstats (8) — FTP Log summarizer [man]

G

  • gdisk (8) — Interactive GUID partition table (GPT) manipulator [man]
  • genccode (8) — generate C or platform specific assembly code from an ... [man]
  • gencmn (8) — generate an ICU memory-mappable data file [man]
  • genl (8) — generic netlink utility frontend [man]
  • gensprep (8) — compile StringPrep data from files filtered by filterR... [man]
  • getcap (8) — examine file capabilities [man]
  • getkeycodes (8) — print kernel scancode-to-keycode mapping table [man]
  • getpcaps (8) — display process capabilities [man]
  • getty (8) — alternative Linux getty [man]
  • gradm2 (8) — Administration program for the grsecurity RBAC system [man]
  • grlearn (8) — Automatic learning daemon for grsecurity RBAC system [man]
  • groupadd (8) — create a new group [man]
  • groupdel (8) — delete a group [man]
  • groupmems (8) — administer members of a user's primary group [man]
  • groupmod (8) — modify a group definition on the system [man]
  • grpck (8) — verify integrity of group files [man]
  • grpconv (8) — convert to and from shadow passwords and groups [man]
  • grpunconv (8) — convert to and from shadow passwords and groups [man]
  • grub-bios-setup (8) — set up a device to boot using GRUB [man]
  • grub-install (8) — install GRUB to a device [man]
  • grub-macbless (8) — bless a mac file/directory [man]
  • grub-mkconfig (8) — generate a GRUB configuration file [man]
  • grub-mkdevicemap (8) — make a device map file automatically [man]
  • grub-probe (8) — probe device information for GRUB [man]
  • grub-reboot (8) — set the default boot entry for GRUB, for the next boot... [man]
  • grub-set-default (8) — set the saved default boot entry for GRUB [man]
  • gssd (8) — RPCSEC_GSS daemon [man]

H

  • halt (8) — Halt, power-off or reboot the machine [man]
  • hdparm (8) — get/set SATA/IDE device parameters [man]
  • hg-ssh (8) — restricted ssh login shell for Mercurial [man]
  • htcacheclean (8) — Clean up the disk cache [man]
  • hwclock (8) — time clocks utility [man]

I

  • i386 (8) — change reported architecture in new program environmen... [man]
  • icmpinfo (8) — interpret ICMP messages [man]
  • iconvconfig (8) — create iconv module configuration cache [man]
  • icupkg (8) — extract or modify an ICU .dat archive [man]
  • idmapd (8) — NFSv4 ID <-> Name Mapper [man]
  • ifcfg (8) — simplistic script which replaces ifconfig IP management [man]
  • ifconfig (8) — configure a network interface [man]
  • ifdown (8) — take a network interface down [man]
  • ifenslave (8) — Attach and detach slave network devices to a bonding d... [man]
  • ifenslave-2.6 (8) — Attach and detach slave network devices to a bonding d... [man]
  • ifquery (8) — parse interface configuration [man]
  • iftop (8) — display bandwidth usage on an interface by host [man]
  • ifup (8) — bring a network interface up [man]
  • insmod (8) — Simple program to insert a module into the Linux Kernel [man]
  • install-mh (8mh) — initialize the nmh environment [man]
  • install-sgmlcatalog (8) — maintain transitional SGML catalog [man]
  • installkernel (8) — install a new kernel image [man]
  • integritysetup (8) — manage dm-integrity (block level integrity) volumes [man]
  • intro (8) — introduction to administration and privileged commands [man]
  • invoke-rc.d (8) — executes System-V style init script actions [man]
  • invoke-run (8) — runscript interpreter [man]
  • iotop (8) — simple top-like I/O monitor [man]
  • iotop-py (8) — simple top-like I/O monitor [man]
  • ip (8) — show / manipulate routing, network devices, interfaces... [man]
  • ip-address (8) — protocol address management [man]
  • ip-addrlabel (8) — protocol address label management [man]
  • ip-fou (8) — Foo-over-UDP receive port configuration [man]
  • ip-gue (8) — Generic UDP Encapsulation receive port configuration [man]
  • ip-ioam (8) — IPv6 In-situ OAM (IOAM) [man]
  • ip-l2tp (8) — L2TPv3 static unmanaged tunnel configuration [man]
  • ip-link (8) — network device configuration [man]
  • ip-macsec (8) — MACsec device configuration [man]
  • ip-maddress (8) — multicast addresses management [man]
  • ip-monitor (8) — state monitoring [man]
  • ip-mptcp (8) — MPTCP path manager configuration [man]
  • ip-mroute (8) — multicast routing cache management [man]
  • ip-neighbour (8) — neighbour/arp tables management. [man]
  • ip-netconf (8) — network configuration monitoring [man]
  • ip-netns (8) — process network namespace management [man]
  • ip-nexthop (8) — nexthop object management [man]
  • ip-ntable (8) — neighbour table configuration [man]
  • ip-route (8) — routing table management [man]
  • ip-rule (8) — routing policy database management [man]
  • ip-sr (8) — IPv6 Segment Routing management [man]
  • ip-tcp_metrics (8) — management for TCP Metrics [man]
  • ip-token (8) — tokenized interface identifier support [man]
  • ip-tunnel (8) — tunnel configuration [man]
  • ip-vrf (8) — run a command against a vrf [man]
  • ip-xfrm (8) — transform configuration [man]
  • ip6tables (8) — administration tool for IPv4/IPv6 packet filtering and... [man]
  • ip6tables-apply (8) — a safer way to update iptables remotely [man]
  • ip6tables-legacy (8) — iptables using old getsockopt/setsockopt-based kernel api [man]
  • ip6tables-legacy-restore (8) — iptables using old getsockopt/setsockopt-based... [man]
  • ip6tables-legacy-save (8) — iptables using old getsockopt/setsockopt-based ke... [man]
  • ip6tables-nft (8) — iptables using nftables kernel api [man]
  • ip6tables-nft-restore (8) — iptables using nftables kernel api [man]
  • ip6tables-nft-save (8) — iptables using nftables kernel api [man]
  • ip6tables-restore (8) — Restore IPv6 Tables [man]
  • ip6tables-restore-translate (8) — translation tool to migrate from iptables t... [man]
  • ip6tables-save (8) — dump iptables rules [man]
  • ip6tables-translate (8) — translation tool to migrate from ip6tables to nftables [man]
  • ipmievd (8) — IPMI event daemon for sending events to syslog [man]
  • ipmilan (8) — IPMI LAN to System Interface Converter [man]
  • ipset (8) — administration tool for IP sets [man]
  • ipset-translate (8) — translation tool to migrate from ipset to nftables [man]
  • iptables (8) — administration tool for IPv4/IPv6 packet filtering and... [man]
  • iptables-apply (8) — a safer way to update iptables remotely [man]
  • iptables-extensions (8) — list of extensions in the standard iptables distrib... [man]
  • iptables-legacy (8) — iptables using old getsockopt/setsockopt-based kernel api [man]
  • iptables-legacy-restore (8) — iptables using old getsockopt/setsockopt-based ... [man]
  • iptables-legacy-save (8) — iptables using old getsockopt/setsockopt-based ker... [man]
  • iptables-nft (8) — iptables using nftables kernel api [man]
  • iptables-nft-restore (8) — iptables using nftables kernel api [man]
  • iptables-nft-save (8) — iptables using nftables kernel api [man]
  • iptables-restore (8) — Restore IP Tables [man]
  • iptables-restore-translate (8) — translation tool to migrate from iptables to... [man]
  • iptables-save (8) — dump iptables rules [man]
  • iptables-translate (8) — translation tool to migrate from iptables to nftables [man]
  • iptraf-ng (8) — Interactive Colorful IP LAN Monitor [man]
  • iptunnel (8) — Create and manage IP tunnels [man]
  • iscsi-iname (8) — iSCSI initiator name generation tool [man]
  • iscsi_discovery (8) — discover iSCSI targets [man]
  • iscsi_fw_login (8) — Login to all iSCSI Firmware targets [man]
  • iscsiadm (8) — open-iscsi administration utility [man]
  • iscsid (8) — Open-iSCSI daemon [man]
  • iscsistart (8) — iSCSI boot tool [man]
  • isosize (8) — output the length of an iso9660 filesystem [man]
  • ispell-autobuildhash (8) — Autobuilding the ispell hash file for some dicts [man]
  • iucode-tool (8) — Tool to manipulate Intel IA-32/X86-64 microcode bundles [man]
  • iucode_tool (8) — Tool to manipulate Intel IA-32/X86-64 microcode bundles [man]
  • iw (8) — show / manipulate wireless devices and their configura... [man]

K

  • kbdrate (8) — reset the keyboard repeat rate and delay time [man]
  • kernel-install (8) — Add and remove kernel and initramfs images to and from... [man]
  • key.dns_resolver (8) — upcall for request-key to handle dns_resolver keys [man]
  • killall5 (8) — send a signal to all processes. [man]
  • kmod (8) — Program to manage Linux Kernel modules [man]
  • kpartx (8) — Create device maps from partition tables. [man]

L

  • lastlog (8) — reports the most recent login of all users or of a giv... [man]
  • ld-linux (8) — dynamic linker/loader [man]
  • ld-linux.so (8) — dynamic linker/loader [man]
  • ld.so (8) — dynamic linker/loader [man]
  • ldattach (8) — attach a line discipline to a serial line [man]
  • ldconfig (8) — configure dynamic linker run-time bindings [man]
  • libnss_systemd.so.2 (8) — UNIX user and group name resolution for user/group ... [man]
  • linux32 (8) — change reported architecture in new program environmen... [man]
  • linux64 (8) — change reported architecture in new program environmen... [man]
  • lmtp (8postfix) — Postfix SMTP+LMTP client [man]
  • lnstat (8) — unified linux network statistics [man]
  • loadunimap (8) — load the kernel unicode-to-font mapping table [man]
  • local (8postfix) — Postfix local mail delivery [man]
  • locale-gen (8) — generates localisation files from templates [man]
  • logrotate (8) — rotates, compresses, and mails system logs [man]
  • logsave (8) — save the output of a command in a logfile [man]
  • losetup (8) — set up and control loop devices [man]
  • lowntfs-3g (8) — Third Generation Read/Write NTFS Driver [man]
  • lsblk (8) — list block devices [man]
  • lsdev (8) — display information about installed hardware [man]
  • lsinitramfs (8) — list content of an initramfs image [man]
  • lslocks (8) — list local system locks [man]
  • lsmod (8) — Show the status of modules in the Linux Kernel [man]
  • lsns (8) — list namespaces [man]
  • lsof (8) — list open files [man]
  • lspci (8) — list all PCI devices [man]
  • lsusb (8) — list USB devices [man]
  • luksformat (8) — Create and format an encrypted LUKS device [man]
  • lvchange (8) — Change the attributes of logical volume(s) [man]
  • lvconvert (8) — Change logical volume layout [man]
  • lvcreate (8) — Create a logical volume [man]
  • lvdisplay (8) — Display information about a logical volume [man]
  • lvextend (8) — Add space to a logical volume [man]
  • lvm (8) — LVM2 tools [man]
  • lvm-config (8) — Display and manipulate configuration information [man]
  • lvm-dumpconfig (8) — Display and manipulate configuration information [man]
  • lvm-fullreport (8) — (unknown subject) [man]
  • lvm-lvpoll (8) — (unknown subject) [man]
  • lvm2-activation-generator (8) — generator for systemd units to activate LVM v... [man]
  • lvmconfig (8) — Display and manipulate configuration information [man]
  • lvmdiskscan (8) — List devices that may be used as physical volumes [man]
  • lvmdump (8) — create lvm2 information dumps for diagnostic purposes [man]
  • lvmpolld (8) — LVM poll daemon [man]
  • lvmsadc (8) — LVM system activity data collector [man]
  • lvmsar (8) — LVM system activity reporter [man]
  • lvreduce (8) — Reduce the size of a logical volume [man]
  • lvremove (8) — Remove logical volume(s) from the system [man]
  • lvrename (8) — Rename a logical volume [man]
  • lvresize (8) — Resize a logical volume [man]
  • lvs (8) — Display information about logical volumes [man]
  • lvscan (8) — List all logical volumes in all volume groups [man]

M

  • mount.fuse3 (8) — configuration and mount options for FUSE file systems [man]
  • make-bcache (8) — create a cache device [man]
  • make-ssl-cert (8) — Debconf wrapper for openssl [man]
  • mandb (8) — create or update the manual page index caches [man]
  • mapscrn (8) — load screen output mapping table [man]
  • master (8postfix) — Postfix master process [man]
  • mdadm (8) — manage MD devices aka Linux Software RAID [man]
  • mdmon (8) — monitor MD external metadata arrays [man]
  • mii-tool (8) — view, manipulate media-independent interface status [man]
  • mk-runscript (8) — generate service scripts for runit [man]
  • mk_modmap (8) — translate a Linux keytable file into an xmodmap file [man]
  • mkdosfs (8) — create an MS-DOS FAT filesystem [man]
  • mke2fs (8) — create an ext2/ext3/ext4 file system [man]
  • mkfs (8) — build a Linux filesystem [man]
  • mkfs.bfs (8) — make an SCO bfs filesystem [man]
  • mkfs.btrfs (8) — create a btrfs filesystem [man]
  • mkfs.cramfs (8) — make compressed ROM file system [man]
  • mkfs.ext2 (8) — create an ext2/ext3/ext4 file system [man]
  • mkfs.ext3 (8) — create an ext2/ext3/ext4 file system [man]
  • mkfs.ext4 (8) — create an ext2/ext3/ext4 file system [man]
  • mkfs.fat (8) — create an MS-DOS FAT filesystem [man]
  • mkfs.minix (8) — make a Minix filesystem [man]
  • mkfs.msdos (8) — create an MS-DOS FAT filesystem [man]
  • mkfs.ntfs (8) — create an NTFS file system [man]
  • mkfs.vfat (8) — create an MS-DOS FAT filesystem [man]
  • mkfs.xfs (8) — construct an XFS filesystem [man]
  • mkhomedir_helper (8) — Helper binary that creates home directories [man]
  • mkinitramfs (8) — low-level tool for generating an initramfs image [man]
  • mklost+found (8) — create a lost+found directory on a mounted Linux secon... [man]
  • mkntfs (8) — create an NTFS file system [man]
  • mkswap (8) — set up a Linux swap area [man]
  • ModemManager (8) — mobile broadband modem management daemon [man]
  • modinfo (8) — Show information about a Linux Kernel module [man]
  • modprobe (8) — Add and remove modules from the Linux Kernel [man]
  • mount (8) — mount a filesystem [man]
  • mount.fuse (8) — configuration and mount options for FUSE file systems [man]
  • mount.lowntfs-3g (8) — Third Generation Read/Write NTFS Driver [man]
  • mount.nfs (8) — mount a Network File System [man]
  • mount.ntfs (8) — Third Generation Read/Write NTFS Driver [man]
  • mount.ntfs-3g (8) — Third Generation Read/Write NTFS Driver [man]
  • mountstats (8) — Displays various NFS client per-mount statistics [man]
  • mpathpersist (8) — Manages SCSI persistent reservations on dm multipath d... [man]
  • mpt-status (8) — retrieve configuration and health status from LSI hard... [man]
  • mtr (8) — a network diagnostic tool [man]
  • mtr-packet (8) — send and receive network probes [man]
  • multilog (8) — reads a sequence of lines from stdin and appends selec... [man]
  • multipath (8) — Device mapper target autoconfig. [man]
  • multipathd (8) — Multipath daemon. [man]

N

  • nameif (8) — name network interfaces based on MAC addresses [man]
  • ndisc6 (8) — ICMPv6 Neighbor Discovery tool [man]
  • netplan-apply (8) — apply configuration from netplan YAML files to a runni... [man]
  • netplan-dbus (8) — daemon to access netplan's functionality via a DBus API [man]
  • netplan-generate (8) — generate backend configuration from netplan YAML files [man]
  • netplan-get (8) — read merged netplan YAML configuration [man]
  • netplan-info (8) — show available features [man]
  • netplan-ip (8) — retrieve IP information (like DHCP leases) from the sy... [man]
  • netplan-rebind (8) — rebind SR-IOV virtual functions to their driver [man]
  • netplan-set (8) — write netplan YAML configuration snippets to file [man]
  • netplan-status (8) — query networking state of the running system [man]
  • netplan-try (8) — try a configuration, optionally rolling it back [man]
  • netstat (8) — Print network connections, routing tables, interface s... [man]
  • networkd-dispatcher (8) — Dispatcher service for systemd-networkd connection ... [man]
  • newusers (8) — update and create new users in batch [man]
  • nfnl_osf (8) — OS fingerprint loader utility [man]
  • nfsconf (8) — Query various NFS configuration settings [man]
  • nfsiostat (8) — Emulate iostat for NFS mount points using /proc/self/m... [man]
  • nfsstat (8) — list NFS statistics [man]
  • nft (8) — Administration tool of the nftables framework for pack... [man]
  • nftables (8) — Administration tool of the nftables framework for pack... [man]
  • nginx (8) — "HTTP and reverse proxy server, mail proxy server" [man]
  • nologin (8) — politely refuse a login [man]
  • nss-systemd (8) — UNIX user and group name resolution for user/group loo... [man]
  • nstat (8) — network statistics tools. [man]
  • ntfs-3g (8) — Third Generation Read/Write NTFS Driver [man]
  • ntfs-3g.probe (8) — Probe an NTFS volume mountability [man]
  • ntfscat (8) — print NTFS files and streams on the standard output [man]
  • ntfsclone (8) — Efficiently clone, image, restore or rescue an NTFS [man]
  • ntfscluster (8) — identify files in a specified region of an NTFS volume. [man]
  • ntfscmp (8) — compare two NTFS filesystems and tell the differences [man]
  • ntfscp (8) — copy file to an NTFS volume. [man]
  • ntfsdecrypt (8) — decrypt or update NTFS files encrypted according to EFS [man]
  • ntfsfallocate (8) — preallocate space to a file on an NTFS volume [man]
  • ntfsfix (8) — fix common errors and force Windows to check NTFS [man]
  • ntfsinfo (8) — dump a file's attributes [man]
  • ntfslabel (8) — display/change the label on an ntfs file system [man]
  • ntfsls (8) — list directory contents on an NTFS filesystem [man]
  • ntfsprogs (8) — tools for doing neat things with NTFS [man]
  • ntfsrecover (8) — Recover updates committed by Windows on an NTFS volume [man]
  • ntfsresize (8) — resize an NTFS filesystem without data loss [man]
  • ntfssecaudit (8) — NTFS Security Data Auditing [man]
  • ntfstruncate (8) — truncate a file on an NTFS volume [man]
  • ntfsundelete (8) — recover a deleted file from an NTFS volume. [man]
  • ntfsusermap (8) — NTFS Building a User Mapping File [man]
  • ntfswipe (8) — overwrite unused space on an NTFS volume [man]
  • ntp-keygen (8) — Create a NTP host key [man]
  • ntp-wait (8) — Wait for ntpd to stabilize the system clock [man]
  • ntpd (8) — NTP daemon program [man]
  • ntpdate (8) — set the date and time via NTP [man]
  • ntpdate-debian (8) — set the date and time via NTP [man]
  • ntptime (8) — read kernel time variables [man]

O

  • oqmgr (8postfix) — old Postfix queue manager [man]
  • overlayroot-chroot (8) — chroot into the lower filesystem in a writable mode [man]
  • ownership (8) — Compaq ownership tag retriever [man]

P

  • pam-auth-update (8) — manage PAM configuration using packaged profiles [man]
  • pam_access (8) — PAM module for logdaemon style login access control [man]
  • pam_cap (8) — PAM module to set inheritable capabilities [man]
  • pam_debug (8) — PAM module to debug the PAM stack [man]
  • pam_deny (8) — The locking-out PAM module [man]
  • pam_echo (8) — PAM module for printing text messages [man]
  • pam_exec (8) — PAM module which calls an external command [man]
  • pam_extrausers (8) — Module for libnss-extrausers authentication [man]
  • pam_faildelay (8) — Change the delay on failure per-application [man]
  • pam_faillock (8) — Module counting authentication failures during a speci... [man]
  • pam_filter (8) — PAM filter module [man]
  • pam_ftp (8) — PAM module for anonymous access module [man]
  • pam_getenv (8) — get environment variables from /etc/environment [man]
  • pam_google_authenticator (8) — PAM module for Google two-factor authentication [man]
  • pam_group (8) — PAM module for group access [man]
  • pam_issue (8) — PAM module to add issue file to user prompt [man]
  • pam_keyinit (8) — Kernel session keyring initialiser module [man]
  • pam_lastlog (8) — PAM module to display date of last login and perform i... [man]
  • pam_limits (8) — PAM module to limit resources [man]
  • pam_listfile (8) — deny or allow services based on an arbitrary file [man]
  • pam_localuser (8) — require users to be listed in /etc/passwd [man]
  • pam_loginuid (8) — Record user's login uid to the process attribute [man]
  • pam_mail (8) — Inform about available mail [man]
  • pam_mkhomedir (8) — PAM module to create users home directory [man]
  • pam_motd (8) — Display the motd file [man]
  • pam_namespace (8) — PAM module for configuring namespace for a session [man]
  • pam_namespace_helper (8) — Helper binary that creates home directories [man]
  • pam_nologin (8) — Prevent non-root users from login [man]
  • pam_permit (8) — The promiscuous module [man]
  • pam_pwhistory (8) — PAM module to remember last passwords [man]
  • pam_rhosts (8) — The rhosts PAM module [man]
  • pam_rootok (8) — Gain only root access [man]
  • pam_securetty (8) — Limit root login to special devices [man]
  • pam_sepermit (8) — PAM module to allow/deny login depending on SELinux en... [man]
  • pam_setquota (8) — PAM module to set or modify disk quotas on session start [man]
  • pam_shells (8) — PAM module to check for valid login shell [man]
  • pam_succeed_if (8) — test account characteristics [man]
  • pam_systemd (8) — Register user sessions in the systemd login manager [man]
  • pam_time (8) — PAM module for time control access [man]
  • pam_timestamp (8) — Authenticate using cached successful authentication at... [man]
  • pam_timestamp_check (8) — Check to see if the default timestamp is valid [man]
  • pam_tty_audit (8) — Enable or disable TTY auditing for specified users [man]
  • pam_umask (8) — PAM module to set the file mode creation mask [man]
  • pam_unix (8) — Module for traditional password authentication [man]
  • pam_userdb (8) — PAM module to authenticate against a db database [man]
  • pam_usertype (8) — check if the authenticated user is a system or regular... [man]
  • pam_warn (8) — PAM module which logs all PAM items if called [man]
  • pam_wheel (8) — Only permit root access to members of group wheel [man]
  • pam_xauth (8) — PAM module to forward xauth keys between users [man]
  • paperconfig (8) — configure the system default paper size [man]
  • parted (8) — a partition manipulation program [man]
  • partprobe (8) — inform the OS of partition table changes [man]
  • partx (8) — tell the kernel about the presence and numbering of on... [man]
  • passenger-memory-stats (8) — reports a snapshot of the Apache and Phusion Pas... [man]
  • passenger-status (8) — inspect Phusion Passenger's internal status [man]
  • pgrphack (8) — runs a program in a separate process group. [man]
  • pickup (8postfix) — Postfix local mail pickup [man]
  • pidof (8) — find the process ID of a running program. [man]
  • ping (8) — send ICMP ECHO_REQUEST to network hosts [man]
  • ping4 (8) — send ICMP ECHO_REQUEST to network hosts [man]
  • ping6 (8) — send ICMP ECHO_REQUEST to network hosts [man]
  • pipe (8postfix) — Postfix delivery to external command [man]
  • pivot_root (8) — change the root filesystem [man]
  • pklocalauthority (8) — PolicyKit Local Authority [man]
  • plipconfig (8) — fine tune PLIP device parameters [man]
  • plymouth (8) — A graphical boot system and logger [man]
  • plymouthd (8) — The plymouth daemon [man]
  • polkit (8) — Authorization Framework [man]
  • polkitd (8) — PolicyKit daemon [man]
  • post (8mh) — deliver an nmh message [man]
  • postfix-add-filter (8) — add filter service to Postfix master.cf [man]
  • postfix-add-policy (8) — add policy service to Postfix master.cf [man]
  • postlogd (8postfix) — Postfix internal log server [man]
  • postscreen (8postfix) — Postfix zombie blocker [man]
  • poweroff (8) — Halt, power-off or reboot the machine [man]
  • probe-bcache (8) — probe a bcache device [man]
  • procinfo (8) — display system statistics gathered from /proc [man]
  • proftpd (8) — Professional configurable, secure file transfer protoc... [man]
  • proxymap (8postfix) — Postfix lookup table proxy server [man]
  • pvchange (8) — Change attributes of physical volume(s) [man]
  • pvck (8) — Check metadata on physical volumes [man]
  • pvcreate (8) — Initialize physical volume(s) for use by LVM [man]
  • pvdisplay (8) — Display various attributes of physical volume(s) [man]
  • pvmove (8) — Move extents from one physical volume to another [man]
  • pvremove (8) — Remove LVM label(s) from physical volume(s) [man]
  • pvresize (8) — Resize physical volume(s) [man]
  • pvs (8) — Display information about physical volumes [man]
  • pvscan (8) — List all physical volumes [man]
  • pwck (8) — verify integrity of password files [man]
  • pwconv (8) — convert to and from shadow passwords and groups [man]
  • pwunconv (8) — convert to and from shadow passwords and groups [man]

Q

  • qmgr (8postfix) — Postfix queue manager [man]
  • qmqpd (8postfix) — Postfix QMQP server [man]

R

  • runit-init (8) — a UNIX process no 1 [man]
  • rarp (8) — manipulate the system RARP table [man]
  • rc-local.service (8) — Compatibility generator and service to start /etc/rc.l... [man]
  • rdisc6 (8) — ICMPv6 Router Discovery tool [man]
  • rdma (8) — RDMA tool [man]
  • rdma-dev (8) — RDMA device configuration [man]
  • rdma-link (8) — rdma link configuration [man]
  • rdma-resource (8) — rdma resource configuration [man]
  • rdma-statistic (8) — RDMA statistic counter configuration [man]
  • rdma-system (8) — RDMA subsystem configuration [man]
  • readproctitle (8) — maintains an automatically rotated log in memory for i... [man]
  • readprofile (8) — read kernel profiling information [man]
  • reboot (8) — Halt, power-off or reboot the machine [man]
  • remove-default-ispell (8) — remove default ispell dictionary [man]
  • remove-default-wordlist (8) — remove default wordlist [man]
  • remove-shell (8) — remove shells from the list of valid login shells [man]
  • request-key (8) — handle key instantiation callback requests from the ke... [man]
  • rescan-scsi-bus (8) — rescan the SCSI bus. [man]
  • rescan-scsi-bus.sh (8) — script to add and remove SCSI devices without rebooting [man]
  • resize2fs (8) — ext2/ext3/ext4 file system resizer [man]
  • resizecons (8) — change kernel idea of the console size [man]
  • resizepart (8) — tell the kernel about the new size of a partition [man]
  • rltraceroute6 (8) — IPv6 traceroute tool [man]
  • rmail (8) — handle remote mail received via uucp [man]
  • rmmod (8) — Simple program to remove a module from the Linux Kernel [man]
  • rmt (8) — remote magnetic tape server [man]
  • rmt-tar (8) — remote magnetic tape server [man]
  • rotatelogs (8) — Piped logging program to rotate Apache logs [man]
  • route (8) — show / manipulate the IP routing table [man]
  • routef (8) — flush routes [man]
  • routel (8) — list routes with pretty output format [man]
  • rpc.gssd (8) — RPCSEC_GSS daemon [man]
  • rpc.idmapd (8) — NFSv4 ID <-> Name Mapper [man]
  • rpc.sm-notify (8) — send reboot notifications to NFS peers [man]
  • rpc.statd (8) — NSM service daemon [man]
  • rpc.svcgssd (8) — server-side rpcsec_gss daemon [man]
  • rpcbind (8) — universal addresses to RPC program number mapper [man]
  • rpcdebug (8) — set and clear NFS and RPC kernel debug flags [man]
  • rpcinfo (8) — report RPC information [man]
  • rsyslogd (8) — reliable and extended syslogd [man]
  • rtacct (8) — network statistics tools. [man]
  • rtcwake (8) — enter a system sleep state until specified wakeup time [man]
  • rtmon (8) — listens to and monitors RTnetlink [man]
  • rtpr (8) — replace backslashes with newlines. [man]
  • rtstat (8) — unified linux network statistics [man]
  • run-parts (8) — run scripts or programs in a directory [man]
  • runit (8) — a UNIX process no 1 [man]
  • runit-runlevel (8) — SysV-init compatibility layer [man]
  • runit-shutdown (8) — poweroff or reboot the system [man]
  • runlevel (8) — Print previous and current SysV runlevel [man]
  • runsv (8) — starts and monitors a service and optionally an append... [man]
  • runsvchdir (8) — change services directory of runsvdir(8) [man]
  • runsvdir (8) — starts and monitors a collection of runsv(8) processes [man]

S

T

  • tc-pie (8) — Proportional Integral controller-Enhanced AQM algorithm [man]
  • tc-actions (8) — independently defined actions in tc [man]
  • tc-basic (8) — basic traffic control filter [man]
  • tc-pfifo (8) — Packet limited First In, First Out queue [man]
  • tc-bpf (8) — BPF programmable classifier and actions for ingress/eg... [man]
  • tc-cake (8) — Common Applications Kept Enhanced (CAKE) [man]
  • tc-cbq-details (8) — Class Based Queueing [man]
  • tc-cbs (8) — Credit Based Shaper (CBS) Qdisc [man]
  • tc-cgroup (8) — control group based traffic control filter [man]
  • tc-choke (8) — choose and keep scheduler [man]
  • tc-fq_codel (8) — Fair Queuing (FQ) with Controlled Delay (CoDel) [man]
  • tc-connmark (8) — netfilter connmark retriever action [man]
  • tc-csum (8) — checksum update action [man]
  • tc-ct (8) — tc connection tracking action [man]
  • tc-ctinfo (8) — tc connmark processing action [man]
  • tc-drr (8) — deficit round robin scheduler [man]
  • tc-ematch (8) — extended matches for use with "basic", "cgroup" or "fl... [man]
  • tc-etf (8) — Earliest TxTime First (ETF) Qdisc [man]
  • tc-ets (8) — Enhanced Transmission Selection scheduler [man]
  • tc-flow (8) — flow based traffic control filter [man]
  • tc-flower (8) — flow based traffic control filter [man]
  • tc-fq (8) — Fair Queue traffic policing [man]
  • tc-fq_pie (8) — Flow Queue Proportional Integral controller Enhanced [man]
  • tc-fw (8) — fwmark traffic control filter [man]
  • tc-gate (8) — Stream Gate Action [man]
  • tc-hfsc (8) — Hierarchical Fair Service Curve's control under linux [man]
  • tc-htb (8) — Hierarchy Token Bucket [man]
  • tc-ife (8) — encapsulate/decapsulate metadata [man]
  • tc-matchall (8) — traffic control filter that matches every packet [man]
  • tc-mirred (8) — mirror/redirect action [man]
  • tc-mpls (8) — mpls manipulation module [man]
  • tc-mqprio (8) — Multiqueue Priority Qdisc (Offloaded Hardware QOS) [man]
  • tc-nat (8) — stateless native address translation action [man]
  • tc-netem (8) — Network Emulator [man]
  • tc-pedit (8) — generic packet editor action [man]
  • tc-pfifo_fast (8) — three-band first in, first out queue [man]
  • tc-police (8) — policing action [man]
  • tc-prio (8) — Priority qdisc [man]
  • tc-red (8) — Random Early Detection [man]
  • tc-sample (8) — packet sampling tc action [man]
  • tc-sfb (8) — Stochastic Fair Blue [man]
  • tc-sfq (8) — Stochastic Fairness Queueing [man]
  • tc-simple (8) — basic example action [man]
  • tc-skbedit (8) — SKB editing action [man]
  • tc-skbmod (8) — user-friendly packet editor action [man]
  • tc-skbprio (8) — SKB Priority Queue [man]
  • tai64n (8) — puts a precise timestamp on each line. [man]
  • tai64nlocal (8) — converts precise TAI64N timestamps to a human-readable... [man]
  • tc-taprio (8) — Time Aware Priority Shaper [man]
  • tasksel (8) — a user interface for installing tasks [man]
  • tc-tbf (8) — Token Bucket Filter [man]
  • tc (8) — show / manipulate traffic control settings [man]
  • tc-bfifo (8) — Packet limited First In, First Out queue [man]
  • tc-cbq (8) — Class Based Queueing [man]
  • tc-codel (8) — Controlled-Delay Active Queue Management algorithm [man]
  • tc-route (8) — route traffic control filter [man]
  • tc-stab (8) — Generic size table manipulations [man]
  • tc-tcindex (8) — traffic control index filter [man]
  • tc-tunnel_key (8) — Tunnel metadata manipulation [man]
  • tc-u32 (8) — universal 32bit traffic control filter [man]
  • tc-vlan (8) — vlan manipulation module [man]
  • tc-xt (8) — tc iptables action [man]
  • tcpdump (8) — dump traffic on a network [man]
  • tcptraceroute (8) — print the route packets trace to network host [man]
  • tcptraceroute.db (8) — print the route packets trace to network host [man]
  • tcptraceroute6 (8) — IPv6 traceroute tool [man]
  • telinit (8) — Change SysV runlevel [man]
  • thin_check (8) — validates thin provisioning metadata on a device or file [man]
  • thin_delta (8) — Print the differences in the mappings between two thin... [man]
  • thin_dump (8) — dump thin provisioning metadata from device or file to... [man]
  • thin_ls (8) — List thin volumes within a pool. [man]
  • thin_metadata_size (8) — thin provisioning metadata device/file size calculator. [man]
  • thin_repair (8) — repair thin provisioning binary metadata. [man]
  • thin_restore (8) — restore thin provisioning metadata file to device or f... [man]
  • thin_rmap (8) — output reverse map of a thin provisioned region of blo... [man]
  • thin_trim (8) — Issue discard requests for free pool space (offline to... [man]
  • tipc (8) — a TIPC configuration and management tool [man]
  • tipc-bearer (8) — show or modify TIPC bearers [man]
  • tipc-link (8) — show links or modify link properties [man]
  • tipc-media (8) — list or modify media properties [man]
  • tipc-nametable (8) — show TIPC nametable [man]
  • tipc-node (8) — modify and show local node parameters or list peer nodes [man]
  • tipc-peer (8) — modify peer information [man]
  • tipc-socket (8) — show TIPC socket (port) information [man]
  • tk_scsiformat (8) — low level format an scsi disk device with a nice user ... [man]
  • tlsmgr (8postfix) — Postfix TLS session cache and PRNG manager [man]
  • tlsproxy (8postfix) — Postfix TLS proxy [man]
  • tmpreaper (8) — removes files which haven't been accessed for a period... [man]
  • trace (8postfix) — Postfix delivery status reports [man]
  • tracepath (8) — traces path to a network host discovering MTU along th... [man]
  • traceroute6 (8) — IPv6 traceroute tool [man]
  • tracert6 (8) — IPv6 traceroute tool [man]
  • trivial-rewrite (8postfix) — Postfix address rewriting and resolving daemon [man]
  • tune2fs (8) — adjust tunable file system parameters on ext2/ext3/ext... [man]
  • tzselect (8) — select a timezone [man]

U

V

  • validlocale (8) — Test if a given locale is available [man]
  • vconfig (8) — VLAN (802.1q) configuration program. [man]
  • vcstime (8) — Show time in upper right hand corner of the console sc... [man]
  • vdpa (8) — vdpa management tool [man]
  • vdpa-dev (8) — vdpa device configuration [man]
  • vdpa-mgmtdev (8) — vdpa management device view [man]
  • verify (8postfix) — Postfix address verification server [man]
  • veritysetup (8) — manage dm-verity (block level verification) volumes [man]
  • vgcfgbackup (8) — Backup volume group configuration(s) [man]
  • vgcfgrestore (8) — Restore volume group configuration [man]
  • vgchange (8) — Change volume group attributes [man]
  • vgck (8) — Check the consistency of volume group(s) [man]
  • vgconvert (8) — Change volume group metadata format [man]
  • vgcreate (8) — Create a volume group [man]
  • vgdisplay (8) — Display volume group information [man]
  • vgexport (8) — Unregister volume group(s) from the system [man]
  • vgextend (8) — Add physical volumes to a volume group [man]
  • vgimport (8) — Register exported volume group with system [man]
  • vgimportclone (8) — Import a VG from cloned PVs [man]
  • vgmerge (8) — Merge volume groups [man]
  • vgmknodes (8) — Create the special files for volume group devices in /dev [man]
  • vgreduce (8) — Remove physical volume(s) from a volume group [man]
  • vgremove (8) — Remove volume group(s) [man]
  • vgrename (8) — Rename a volume group [man]
  • vgs (8) — Display information about volume groups [man]
  • vgscan (8) — Search for all volume groups [man]
  • vgsplit (8) — Move physical volumes into a new or existing volume group [man]
  • vigr (8) — edit the password, group, shadow-password or shadow-gr... [man]
  • vipw (8) — edit the password, group, shadow-password or shadow-gr... [man]
  • virtual (8postfix) — Postfix virtual domain mail delivery agent [man]
  • visudo (8) — edit the sudoers file [man]
  • vmstat (8) — Report virtual memory statistics [man]
  • vpddecode (8) — VPD structure decoder [man]

W

  • wdctl (8) — show hardware watchdog status [man]
  • wipefs (8) — wipe a signature from a device [man]

X

  • x86_64 (8) — change reported architecture in new program environmen... [man]
  • xfs_admin (8) — change parameters of an XFS filesystem [man]
  • xfs_bmap (8) — print block mapping for an XFS file [man]
  • xfs_copy (8) — copy the contents of an XFS filesystem [man]
  • xfs_db (8) — debug an XFS filesystem [man]
  • xfs_estimate (8) — estimate the space that an XFS filesystem will take [man]
  • xfs_freeze (8) — suspend access to an XFS filesystem [man]
  • xfs_fsr (8) — filesystem reorganizer for XFS [man]
  • xfs_growfs (8) — expand an XFS filesystem [man]
  • xfs_info (8) — display XFS filesystem geometry information [man]
  • xfs_io (8) — debug the I/O path of an XFS filesystem [man]
  • xfs_logprint (8) — print the log of an XFS filesystem [man]
  • xfs_mdrestore (8) — restores an XFS metadump image to a filesystem image [man]
  • xfs_metadump (8) — copy XFS filesystem metadata to a file [man]
  • xfs_mkfile (8) — create an XFS file [man]
  • xfs_ncheck (8) — generate pathnames from i-numbers for XFS [man]
  • xfs_quota (8) — manage use of quota on XFS filesystems [man]
  • xfs_repair (8) — repair an XFS filesystem [man]
  • xfs_rtcp (8) — XFS realtime copy command [man]
  • xfs_scrub (8) — check and repair the contents of a mounted XFS filesystem [man]
  • xfs_scrub_all (8) — scrub all mounted XFS filesystems [man]
  • xfs_spaceman (8) — show free space information about an XFS filesystem [man]
  • xfsdump (8) — XFS filesystem incremental dump utility [man]
  • xfsinvutil (8) — xfsdump inventory database checking and pruning utility [man]
  • xfsrestore (8) — XFS filesystem incremental restore utility [man]
  • xtables-legacy (8) — iptables using old getsockopt/setsockopt-based kernel api [man]
  • xtables-legacy-multi (8) — iptables using old getsockopt/setsockopt-based ker... [man]
  • xtables-monitor (8) — show changes to rule set and trace-events [man]
  • xtables-nft (8) — iptables using nftables kernel api [man]
  • xtables-nft-multi (8) — iptables using nftables kernel api [man]
  • xtables-translate (8) — translation tool to migrate from iptables to nftables [man]

Z

  • zdump (8) — timezone dumper [man]
  • zerofree (8) — zero free blocks from ext2, ext3 and ext4 file-systems [man]
  • zic (8) — timezone compiler [man]
  • zramctl (8) — set up and control zram devices [man]
A-Z Index □✕
# 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Ruby (ri)

Generated by phpman v3.7.12 Author: Che Dong Under GNU General Public License
2026-06-13 14:39 @216.73.216.28
CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Valid XHTML 1.0 TransitionalValid CSS!