VGREMOVE(8) System Manager's Manual VGREMOVE(8) NAME vgremove - Remove volume group(s) SYNOPSIS vgremove position_args [ option_args ] DESCRIPTION vgremove removes one or more VGs. If LVs exist in the VG, a prompt is used to confirm LV removal. If one or more PVs in the VG are lost, consider vgreduce --removemissing to make the VG metadata consistent again. Repeat the force option (-ff) to forcibly remove LVs in the VG without confirmation. USAGE vgremove VG|Tag|Select ... [ -f|--force ] [ -S|--select String ] [ --noudevsync ] [ --reportformat basic|json ] [ COMMON_OPTIONS ] Common options for lvm: [ -d|--debug ] [ -h|--help ] [ -q|--quiet ] [ -t|--test ] [ -v|--verbose ] [ -y|--yes ] [ --commandprofile String ] [ --config String ] [ --driverloaded y|n ] [ --lockopt String ] [ --longhelp ] [ --nolocking ] [ --profile String ] [ --version ] OPTIONS --commandprofile String The command profile to use for command configuration. See lvm.conf(5) for more in- formation about profiles. --config String Config settings for the command. These override lvm.conf settings. The String arg uses the same format as lvm.conf, or may use section/field syntax. See lvm.conf(5) for more information about config. -d|--debug ... Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). --driverloaded y|n If set to no, the command will not attempt to use device-mapper. For testing and debugging. -f|--force ... Override various checks, confirmations and protections. Use with extreme caution. -h|--help Display help text. --lockopt String Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more in- formation. --longhelp Display long help text. --nolocking Disable locking. --noudevsync Disables udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible udev processing in the back- ground. Only use this if udev is not running or has rules that ignore the devices LVM creates. --profile String An alias for --commandprofile or --metadataprofile, depending on the command. -q|--quiet ... Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer 'no'. --reportformat basic|json Overrides current output format for reports which is defined globally by the re- port/output_format setting in lvm.conf. basic is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. json produces report output in JSON for- mat. See lvmreport(7) for more information. -S|--select String Select objects for processing and reporting based on specified criteria. The cri- teria syntax is described by --select help and lvmreport(7). For reporting com- mands, one row is displayed for each object matching the criteria. See --options help for selectable object fields. Rows can be displayed with an additional "se- lected" field (-o selected) showing 1 if the row matches the selection and 0 other- wise. For non-reporting commands which process LVM entities, the selection is used to choose items to process. -t|--test Run in test mode. Commands will not update metadata. This is implemented by dis- abling all metadata writing but nevertheless returning success to the calling func- tion. This may lead to unusual error messages in multi-stage operations if a tool relies on reading back metadata it believes has changed but hasn't. -v|--verbose ... Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr. --version Display version information. -y|--yes Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see -qq.) VARIABLES VG Volume Group name. See lvm(8) for valid names. Tag Tag name. See lvm(8) for information about tag names and using tags in place of a VG, LV or PV. Select Select indicates that a required positional parameter can be omitted if the --se- lect option is used. No arg appears in this position. String See the option description for information about the string content. Size[UNIT] Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both re- fer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: bBsSkKmMgGtTpPeE. b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB. (This should not be confused with the output control --units, where capital letters mean multiple of 1000.) ENVIRONMENT VARIABLES See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter. SEE ALSO lvm(8) lvm.conf(5) lvmconfig(8) pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8) pvresize(8) pvs(8) pvs- can(8) vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8) vgexport(8) vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8) lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8) lvremove(8) lvrename(8) lvresize(8) lvs(8) lvscan(8) lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8) dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8) lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7) Red Hat, Inc. LVM TOOLS 2.03.11(2) (2021-01-08) VGREMOVE(8)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-05 21:20 @18.97.14.87 CrawledBy CCBot/2.0 (https://commoncrawl.org/faq/)