On Apache
Under GNU General Public License
2024-04-19 20:47 @18.191.171.20 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
PVCREATE(8) System Manager's Manual PVCREATE(8)
NAME
pvcreate - Initialize physical volume(s) for use by LVM
SYNOPSIS
pvcreate position_args
[ option_args ]
DESCRIPTION
pvcreate initializes a Physical Volume (PV) on a device so the device is recognized as be-
longing to LVM. This allows the PV to be used in a Volume Group (VG). An LVM disk label
is written to the device, and LVM metadata areas are initialized. A PV can be placed on a
whole device or partition.
Use vgcreate(8) to create a new VG on the PV, or vgextend(8) to add the PV to an existing
VG. Use pvremove(8) to remove the LVM disk label from the device.
The force option will create a PV without confirmation. Repeating the force option (-ff)
will forcibly create a PV, overriding checks that normally prevent it, e.g. if the PV is
already in a VG.
Metadata location, size, and alignment
The LVM disk label begins 512 bytes from the start of the device, and is 512 bytes in
size.
The LVM metadata area begins at an offset (from the start of the device) equal to the page
size of the machine creating the PV (often 4 KiB.) The metadata area contains a 512 byte
header and a multi-KiB circular buffer that holds text copies of the VG metadata.
With default settings, the first physical extent (PE), which contains LV data, is 1 MiB
from the start of the device. This location is controlled by default_data_alignment in
lvm.conf, which is set to 1 (MiB) by default. The pe_start will be a multiple of this
many MiB. This location can be checked with:
pvs -o pe_start PV
The size of the LVM metadata area is the space between the the start of the metadata area
and the first PE. When metadata begins at 4 KiB and the first PE is at 1024 KiB, the
metadata area size is 1020 KiB. This can be checked with:
pvs -o mda_size PV
The mda_size cannot be increased after pvcreate, so if larger metadata is needed, it must
be set during pvcreate. Two copies of the VG metadata must always fit within the metadata
area, so the maximum VG metadata size is around half the mda_size. This can be checked
with:
vgs -o mda_free VG
A larger metadata area can be set with --metadatasize. The resulting mda_size may be
larger than specified due to default_data_alignment placing pe_start on a MiB boundary,
and the fact that the metadata area extends to the first PE. With metadata starting at 4
KiB and default_data_alignment 1 (MiB), setting --metadatasize 2048k results in pe_start
of 3 MiB and mda_size of 3068 KiB. Alternatively, --metadatasize 2044k results in
pe_start at 2 MiB and mda_size of 2044 KiB.
The alignment of pe_start described above may be automatically overriden based on md de-
vice properties or device i/o properties reported in sysfs. These automatic adjustments
can be enabled/disabled using lvm.conf settings md_chunk_alignment and data_alignment_off-
set_detection.
To use a different pe_start alignment, use the --dataalignment option. The --metadatasize
option would also typically be used in this case because the metadata area size also de-
termines the location of pe_start. When using these two options together, pe_start is
calculated as: metadata area start (page size), plus the specified --metadatasize, rounded
up to the next multiple of --dataalignment. With metadata starting at 4 KiB, --metadata-
size 2048k, and --dataalignment 128k, pe_start is 2176 KiB and mda_size is 2172 KiB. The
pe_start of 2176 KiB is the nearest even multiple of 128 KiB that provides at least 2048
KiB of metadata space. Always check the resulting alignment and metadata size when using
these options.
To shift an aligned pe_start value, use the --dataaligmentoffset option. The pe_start
alignment is calculated as described above, and then the value specified with --dataalig-
mentoffset is added to produce the final pe_start value.
USAGE
pvcreate PV ...
[ -f|--force ]
[ -M|--metadatatype lvm2 ]
[ -u|--uuid String ]
[ -Z|--zero y|n ]
[ --dataalignment Size[k|UNIT] ]
[ --dataalignmentoffset Size[k|UNIT] ]
[ --bootloaderareasize Size[m|UNIT] ]
[ --labelsector Number ]
[ --[pv]metadatacopies 0|1|2 ]
[ --metadatasize Size[m|UNIT] ]
[ --metadataignore y|n ]
[ --norestorefile ]
[ --setphysicalvolumesize Size[m|UNIT] ]
[ --reportformat basic|json ]
[ --restorefile String ]
[ COMMON_OPTIONS ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --driverloaded y|n ]
[ --lockopt String ]
[ --longhelp ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS
--bootloaderareasize Size[m|UNIT]
Reserve space for the bootloader between the LVM metadata area and the first PE.
The bootloader area is reserved for bootloaders to embed their own data or meta-
data; LVM will not use it. The bootloader area begins where the first PE would
otherwise be located. The first PE is moved out by the size of the bootloader
area, and then moved out further if necessary to match the data alignment. The
start of the bootloader area is always aligned, see also --dataalignment and
--dataalignmentoffset. The bootloader area may be larger than requested due to the
alignment, but it's never less than the requested size. To see the bootloader area
start and size of an existing PV use pvs -o +pv_ba_start,pv_ba_size.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5) for more in-
formation about profiles.
--config String
Config settings for the command. These override lvm.conf settings. The String arg
uses the same format as lvm.conf, or may use section/field syntax. See lvm.conf(5)
for more information about config.
--dataalignment Size[k|UNIT]
Align the start of a PV data area with a multiple of this number. To see the loca-
tion of the first Physical Extent (PE) of an existing PV, use pvs -o +pe_start. In
addition, it may be shifted by an alignment offset, see --dataalignmentoffset.
Also specify an appropriate PE size when creating a VG.
--dataalignmentoffset Size[k|UNIT]
Shift the start of the PV data area by this additional offset.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent
to the log file and/or syslog (if configured).
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing and
debugging.
-f|--force ...
Override various checks, confirmations and protections. Use with extreme caution.
-h|--help
Display help text.
--labelsector Number
By default the PV is labelled with an LVM2 identifier in its second sector (sector
1). This lets you use a different sector near the start of the disk (between 0 and
3 inclusive - see LABEL_SCAN_SECTORS in the source). Use with care.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more in-
formation.
--longhelp
Display long help text.
--metadataignore y|n
Specifies the metadataignore property of a PV. If yes, metadata areas on the PV
are ignored, and lvm will not store metadata in the metadata areas of the PV. If
no, lvm will store metadata on the PV.
--metadatasize Size[m|UNIT]
The approximate amount of space used for each VG metadata area. The size may be
rounded.
-M|--metadatatype lvm2
Specifies the type of on-disk metadata to use. lvm2 (or just 2) is the current,
standard format. lvm1 (or just 1) is no longer used.
--nolocking
Disable locking.
--norestorefile
In conjunction with --uuid, this allows a uuid to be specified without also requir-
ing that a backup of the metadata be provided.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the command.
--[pv]metadatacopies 0|1|2
The number of metadata areas to set aside on a PV for storing VG metadata. When 2,
one copy of the VG metadata is stored at the front of the PV and a second copy is
stored at the end. When 1, one copy of the VG metadata is stored at the front of
the PV. When 0, no copies of the VG metadata are stored on the given PV. This may
be useful in VGs containing many PVs (this places limitations on the ability to use
vgsplit later.)
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once to
also suppress any prompts with answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is defined globally by the re-
port/output_format setting in lvm.conf. basic is the original format with columns
and rows. If there is more than one report per command, each report is prefixed
with the report name for identification. json produces report output in JSON for-
mat. See lvmreport(7) for more information.
--restorefile String
In conjunction with --uuid, this reads the file (produced by vgcfgbackup), extracts
the location and size of the data on the PV, and ensures that the metadata produced
by the program is consistent with the contents of the file, i.e. the physical ex-
tents will be in the same place and not be overwritten by new metadata. This pro-
vides a mechanism to upgrade the metadata format or to add/remove metadata areas.
Use with care.
--setphysicalvolumesize Size[m|UNIT]
Overrides the automatically detected size of the PV. Use with care, or prior to
reducing the physical size of the device.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by dis-
abling all metadata writing but nevertheless returning success to the calling func-
tion. This may lead to unusual error messages in multi-stage operations if a tool
relies on reading back metadata it believes has changed but hasn't.
-u|--uuid String
Specify a UUID for the device. Without this option, a random UUID is generated.
This option is needed before restoring a backup of LVM metadata onto a replacement
device; see vgcfgrestore(8). As such, use of --restorefile is compulsory unless the
--norestorefile is used. All PVs must have unique UUIDs, and LVM will prevent cer-
tain operations if multiple devices are seen with the same UUID. See vgimport-
clone(8) for more information.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent
to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes. Use
with extreme caution. (For automatic no, see -qq.)
-Z|--zero y|n
Controls if the first 4 sectors (2048 bytes) of the device are wiped. The default
is to wipe these sectors unless either or both of --restorefile or --uuid are spec-
ified.
VARIABLES
PV
Physical Volume name, a device path under /dev. For commands managing physical ex-
tents, a PV positional arg generally accepts a suffix indicating a range (or multi-
ple ranges) of physical extents (PEs). When the first PE is omitted, it defaults to
the start of the device, and when the last PE is omitted it defaults to end. Start
and end range (inclusive): PV[:PE-PE]... Start and length range (counting from 0):
PV[:PE+PE]...
String
See the option description for information about the string content.
Size[UNIT]
Size is an input number that accepts an optional unit. Input units are always
treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both re-
fer to 1024. The default input unit is specified by letter, followed by |UNIT.
UNIT represents other possible input units: bBsSkKmMgGtTpPeE. b|B is bytes, s|S is
sectors of 512 bytes, k|K is kilobytes, m|M is megabytes, g|G is gigabytes, t|T is
terabytes, p|P is petabytes, e|E is exabytes. (This should not be confused with
the output control --units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES
See lvm(8) for information about environment variables used by lvm. For example,
LVM_VG_NAME can generally be substituted for a required VG parameter.
EXAMPLES
Initialize a partition and a full device.
pvcreate /dev/sdc4 /dev/sde
If a device is a 4KiB sector drive that compensates for windows partitioning (sector 7 is
the lowest aligned logical block, the 4KiB sectors start at LBA -1, and consequently sec-
tor 63 is aligned on a 4KiB boundary) manually account for this when initializing for use
by LVM.
pvcreate --dataalignmentoffset 7s /dev/sdb
SEE ALSO
lvm(8) lvm.conf(5) lvmconfig(8)
pvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8) pvresize(8) pvs(8) pvs-
can(8)
vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8)
vgexport(8) vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8)
vgremove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)
lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8) lvremove(8)
lvrename(8) lvresize(8) lvs(8) lvscan(8)
lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)
dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)
lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)
Red Hat, Inc. LVM TOOLS 2.03.07(2) (2019-11-30) PVCREATE(8)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-19 20:47 @18.191.171.20 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)