On Apache
Under GNU General Public License
2024-04-20 01:58 @3.17.186.218 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
NTFS-3G(8) System Manager's Manual NTFS-3G(8)
NAME
ntfs-3g - Third Generation Read/Write NTFS Driver
SYNOPSIS
ntfs-3g [-o option[,...]] volume mount_point
mount -t ntfs-3g [-o option[,...]] volume mount_point
lowntfs-3g [-o option[,...]] volume mount_point
mount -t lowntfs-3g [-o option[,...]] volume mount_point
DESCRIPTION
ntfs-3g is an NTFS driver, which can create, remove, rename, move files, directories, hard
links, and streams; it can read and write files, including streams, sparse files and
transparently compressed files; it can handle special files like symbolic links, devices,
and FIFOs; moreover it provides standard management of file ownership and permissions, in-
cluding POSIX ACLs.
It comes in two variants ntfs-3g and lowntfs-3g with a few differences mentioned below in
relevant options descriptions.
The volume to be mounted can be either a block device or an image file.
Windows hibernation and fast restarting
On computers which can be dual-booted into Windows or Linux, Windows has to be fully shut
down before booting into Linux, otherwise the NTFS file systems on internal disks may be
left in an inconsistent state and changes made by Linux may be ignored by Windows.
So, Windows may not be left in hibernation when starting Linux, in order to avoid incon-
sistencies. Moreover, the fast restart feature available on recent Windows systems has to
be disabled. This can be achieved by issuing as an Administrator the Windows command which
disables both hibernation and fast restarting :
powercfg /h off
If either Windows is hibernated or its fast restart is enabled, partitions on internal
disks are forced to be mounted in read-only mode.
Access Handling and Security
By default, files and directories are owned by the effective user and group of the mount-
ing process, and everybody has full read, write, execution and directory browsing permis-
sions. You can also assign permissions to a single user by using the uid and/or the gid
options together with the umask, or fmask and dmask options.
Doing so, Windows users have full access to the files created by ntfs-3g.
But, by setting the permissions option, you can benefit from the full ownership and per-
missions features as defined by POSIX. Moreover, by defining a Windows-to-Linux user map-
ping, the ownerships and permissions are even applied to Windows users and conversely.
If ntfs-3g is set setuid-root then non-root users will be also able to mount volumes.
Windows Filename Compatibility
NTFS supports several filename namespaces: DOS, Win32 and POSIX. While the ntfs-3g driver
handles all of them, it always creates new files in the POSIX namespace for maximum porta-
bility and interoperability reasons. This means that filenames are case sensitive and all
characters are allowed except '/' and '\0'. This is perfectly legal on Windows, though
some application may get confused. The option windows_names may be used to apply Windows
restrictions to new file names.
Alternate Data Streams (ADS)
NTFS stores all data in streams. Every file has exactly one unnamed data stream and can
have many named data streams. The size of a file is the size of its unnamed data stream.
By default, ntfs-3g will only read the unnamed data stream.
By using the options "streams_interface=windows", with the ntfs-3g driver (not possible
with lowntfs-3g), you will be able to read any named data streams, simply by specifying
the stream's name after a colon. For example:
cat some.mp3:artist
Named data streams act like normal files, so you can read from them, write to them and
even delete them (using rm). You can list all the named data streams a file has by get-
ting the "ntfs.streams.list" extended attribute.
OPTIONS
Below is a summary of the options that ntfs-3g accepts.
uid=value and gid=value
Set the owner and the group of files and directories. The values are numerical.
The defaults are the uid and gid of the current process.
umask=value
Set the bitmask of the file and directory permissions that are not present. The
value is given in octal. The default value is 0 which means full access to every-
body.
fmask=value
Set the bitmask of the file permissions that are not present. The value is given
in octal. The default value is 0 which means full access to everybody.
dmask=value
Set the bitmask of the directory permissions that are not present. The value is
given in octal. The default value is 0 which means full access to everybody.
usermapping=file-name
Use file file-name as the user mapping file instead of the default
.NTFS-3G/UserMapping. If file-name defines a full path, the file must be located on
a partition previously mounted. If it defines a relative path, it is interpreted
relative to the root of NTFS partition being mounted.
When a user mapping file is defined, the options uid=, gid=, umask=, fmask=, dmask=
and silent are ignored.
permissions
Set standard permissions on created files and use standard access control. This
option is set by default when a user mapping file is present.
acl Enable setting Posix ACLs on created files and use them for access control. This
option is only available on specific builds. It is set by default when a user map-
ping file is present and the permissions mount option is not set.
inherit
When creating a new file, set its initial protections according to inheritance
rules defined in parent directory. These rules deviate from Posix specifications,
but yield a better Windows compatibility. The permissions option or a valid user
mapping file is required for this option to be effective.
ro Mount filesystem read-only. Useful if Windows is hibernated or the NTFS journal
file is unclean.
locale=value
This option can be useful when wanting a language specific locale environment. It
is however discouraged as it leads to files with untranslatable chars to not be
visible.
force This option is obsolete. It has been superseded by the recover and norecover op-
tions.
recover
Recover and try to mount a partition which was not unmounted properly by Windows.
The Windows logfile is cleared, which may cause inconsistencies. Currently this is
the default option.
norecover
Do not try to mount a partition which was not unmounted properly by Windows.
ignore_case (only with lowntfs-3g)
Ignore character case when accessing a file (FOO, Foo, foo, etc. designate the same
file). All files are displayed with lower case in directory listings.
remove_hiberfile
When the NTFS volume is hibernated, a read-write mount is denied and a read-only
mount is forced. One needs either to resume Windows and shutdown it properly, or
use this option which will remove the Windows hibernation file. Please note, this
means that the saved Windows session will be completely lost. Use this option under
your own responsibility.
atime, noatime, relatime
The atime option updates inode access time for each access.
The noatime option disables inode access time updates which can speed up file oper-
ations and prevent sleeping (notebook) disks spinning up too often thus saving en-
ergy and disk lifetime.
The relatime option is very similar to noatime. It updates inode access times rel-
ative to modify or change time. The access time is only updated if the previous
access time was earlier than the current modify or change time. Unlike noatime this
option doesn't break applications that need to know if a file has been read since
the last time it was modified. This is the default behaviour.
delay_mtime[= value]
Only update the file modification time and the file change time of a file when it
is closed or when the indicated delay since the previous update has elapsed. The
argument is a number of seconds, with a default value of 60. This is mainly useful
for big files which are kept open for a long time and written to without changing
their size, such as databases or file system images mounted as loop.
show_sys_files
Show the metafiles in directory listings. Otherwise the default behaviour is to
hide the metafiles, which are special files used to store the NTFS structure.
Please note that even when this option is specified, "$MFT" may not be visible due
to a glibc bug. Furthermore, irrespectively of show_sys_files, all files are acces-
sible by name, for example you can always do "ls -l '$UpCase'".
hide_hid_files
Hide the hidden files and directories in directory listings, the hidden files and
directories being the ones whose NTFS attribute have the hidden flag set. The hid-
den files will not be selected when using wildcards in commands, but all files and
directories remain accessible by full name, for example you can always display the
Windows trash bin directory by : "ls -ld '$RECYCLE.BIN'".
hide_dot_files
Set the hidden flag in the NTFS attribute for created files and directories whose
first character of the name is a dot. Such files and directories normally do not
appear in directory listings, and when the flag is set they do not appear in Win-
dows directory displays either. When a file is renamed or linked with a new name,
the hidden flag is adjusted to the latest name.
windows_names
This option prevents files, directories and extended attributes to be created with
a name not allowed by windows, because
- it contains some not allowed character,
- or the last character is a space or a dot,
- or the name is reserved.
The forbidden characters are the nine characters " * / : < > ? \ | and those whose
code is less than 0x20, and the reserved names are CON, PRN, AUX, NUL, COM1..COM9,
LPT1..LPT9, with no suffix or followed by a dot.
Existing such files can still be read (and renamed).
allow_other
This option overrides the security measure restricting file access to the user
mounting the filesystem. This option is only allowed to root, but this restriction
can be overridden by the 'user_allow_other' option in the /etc/fuse.conf file.
max_read=value
With this option the maximum size of read operations can be set. The default is
infinite. Note that the size of read requests is limited anyway to 32 pages (which
is 128kbyte on i386).
silent Do nothing, without returning any error, on chmod and chown operations and on per-
mission checking errors, when the permissions option is not set and no user mapping
file is defined. This option is on by default, and when set off (through option
no_def_opts) ownership and permissions parameters have to be set.
no_def_opts
By default ntfs-3g acts as if "silent" (ignore permission errors when permissions
are not enabled), "allow_other" (allow any user to access files) and "nonempty"
(allow mounting on non-empty directories) were set, and "no_def_opts" cancels these
default options.
streams_interface=value
This option controls how the user can access Alternate Data Streams (ADS) or in
other words, named data streams. It can be set to, one of none, windows or xattr.
If the option is set to none, the user will have no access to the named data
streams. If it is set to windows (not possible with lowntfs-3g), then the user can
access them just like in Windows (eg. cat file:stream). If it's set to xattr, then
the named data streams are mapped to xattrs and user can manipulate them using
{get,set}fattr utilities. The default is xattr.
user_xattr
Same as streams_interface=xattr.
efs_raw
This option should only be used in backup or restore situation. It changes the ap-
parent size of files and the behavior of read and write operation so that encrypted
files can be saved and restored without being decrypted. The user.ntfs.efsinfo ex-
tended attribute has also to be saved and restored for the file to be decrypted.
compression
This option enables creating new transparently compressed files in directories
marked for compression. A directory is marked for compression by setting the bit 11
(value 0x00000800) in its Windows attribute. In such a directory, new files are
created compressed and new subdirectories are themselves marked for compression.
The option and the flag have no effect on existing files. Currently this is the de-
fault option.
nocompression
This option disables creating new transparently compressed files in directories
marked for compression. Existing compressed files can still be read and updated.
big_writes
This option prevents fuse from splitting write buffers into 4K chunks, enabling big
write buffers to be transferred from the application in a single step (up to some
system limit, generally 128K bytes).
debug Makes ntfs-3g to print a lot of debug output from libntfs-3g and FUSE.
no_detach
Makes ntfs-3g to not detach from terminal and print some debug output.
USER MAPPING
NTFS uses specific ids to record the ownership of files instead of the uid and gid used by
Linux. As a consequence a mapping between the ids has to be defined for ownerships to be
recorded into NTFS and recognized.
By default, this mapping is fetched from the file .NTFS-3G/UserMapping located in the NTFS
partition. The option usermapping= may be used to define another location. When the option
permissions is set and no mapping file is found, a default mapping is used.
Each line in the user mapping file defines a mapping. It is organized in three fields sep-
arated by colons. The first field identifies a uid, the second field identifies a gid and
the third one identifies the corresponding NTFS id, known as a SID. The uid and the gid
are optional and defining both of them for the same SID is not recommended.
If no interoperation with Windows is needed, you can use the option permissions to define
a standard mapping. Alternately, you may define your own mapping by setting a single de-
fault mapping with no uid and gid. In both cases, files created on Linux will appear to
Windows as owned by a foreign user, and files created on Windows will appear to Linux as
owned by root. Just copy the example below and replace the 9 and 10-digit numbers by any
number not greater than 4294967295. The resulting behavior is the same as the one with the
option permission set with no ownership option and no user mapping file available.
::S-1-5-21-3141592653-589793238-462643383-10000
If a strong interoperation with Windows is needed, the mapping has to be defined for each
user and group known in both system, and the SIDs used by Windows has to be collected.
This will lead to a user mapping file like :
john::S-1-5-21-3141592653-589793238-462643383-1008
mary::S-1-5-21-3141592653-589793238-462643383-1009
:smith:S-1-5-21-3141592653-589793238-462643383-513
::S-1-5-21-3141592653-589793238-462643383-10000
The utility ntfsusermap may be used to create such a user mapping file.
EXAMPLES
Mount /dev/sda1 to /mnt/windows:
ntfs-3g /dev/sda1 /mnt/windows
or
mount -t ntfs-3g /dev/sda1 /mnt/windows
Mount the ntfs data partition /dev/sda3 to /mnt/data with standard Linux permissions ap-
plied :
ntfs-3g -o permissions /dev/sda3 /mnt/data
or
mount -t ntfs-3g -o permissions /dev/sda3 /mnt/data
Read-only mount /dev/sda5 to /home/user/mnt and make user with uid 1000 to be the owner of
all files:
ntfs-3g /dev/sda5 /home/user/mnt -o ro,uid=1000
/etc/fstab entry for the above (the sixth and last field has to be zero to avoid a file
system check at boot time) :
/dev/sda5 /home/user/mnt ntfs-3g ro,uid=1000 0 0
Unmount /mnt/windows:
umount /mnt/windows
EXIT CODES
To facilitate the use of the ntfs-3g driver in scripts, an exit code is returned to give
an indication of the mountability status of a volume. Value 0 means success, and all other
ones mean an error. The unique error codes are documented in the ntfs-3g.probe(8) manual
page.
KNOWN ISSUES
Please see
http://www.tuxera.com/support/
for common questions and known issues. If you would find a new one in the latest release
of the software then please send an email describing it in detail. You can contact the de-
velopment team on the ntfs-3g-devel AT lists.net address.
AUTHORS
ntfs-3g was based on and a major improvement to ntfsmount and libntfs which were written
by Yura Pakhuchiy and the Linux-NTFS team. The improvements were made, the ntfs-3g project
was initiated and currently led by long time Linux-NTFS team developer Szabolcs Szakacsits
(szaka AT tuxera.com).
THANKS
Several people made heroic efforts, often over five or more years which resulted the
ntfs-3g driver. Most importantly they are Anton Altaparmakov, Jean-Pierre Andre, Richard
Russon, Szabolcs Szakacsits, Yura Pakhuchiy, Yuval Fledel, and the author of the ground-
breaking FUSE filesystem development framework, Miklos Szeredi.
SEE ALSO
ntfs-3g.probe(8), ntfsprogs(8), attr(5), getfattr(1)
ntfs-3g 2017.3.23AR.3 Mar 2014 NTFS-3G(8)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-20 01:58 @3.17.186.218 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)