man > lvmdiskscan(8)

LVMDISKSCAN(8)                         System Manager's Manual                        LVMDISKSCAN(8)

NAME
       lvmdiskscan — List devices that may be used as physical volumes

SYNOPSIS
       lvmdiskscan
           [ option_args ]

DESCRIPTION
       lvmdiskscan scans all SCSI, (E)IDE disks, multiple devices and a bunch of other block devices
       in the system looking for LVM PVs. The size reported is the real device size. Define a filter
       in lvm.conf(5) to restrict the scan to avoid a CD ROM, for example.

       This command is deprecated, use pvs instead.

USAGE
       lvmdiskscan
           [ -l|--lvmpartition ]
           [    --readonly ]
           [ COMMON_OPTIONS ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS


       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more infor‐
              mation about profiles.

       --config String
              Config  settings for the command. These override lvm.conf(5) settings.  The String arg
              uses the same format as lvm.conf(5), or may use section/field syntax.  See lvm.conf(5)
              for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages  sent  to
              the log file and/or syslog (if configured).

       --devices PV
              Restricts  the  devices  that  are visible and accessible to the command.  Devices not
              listed will appear to be missing. This option can be repeated, or accepts a comma sep‐
              arated list of devices. This overrides the devices file.

       --devicesfile String
              A file listing devices that LVM should use.  The file must exist in  /etc/lvm/devices/
              and  is  managed  with  the lvmdevices(8) command.  This overrides the lvm.conf(5) de‐
              vices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and  de‐
              bugging.

       -h|--help
              Display help text.

       --journal String
              Record  information in the systemd journal.  This information is in addition to infor‐
              mation enabled by the lvm.conf log/journal setting.  command: record information about
              the command.  output: record the default command output.  debug: record  full  command
              debugging.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more informa‐
              tion.

       --longhelp
              Display long help text.

       -l|--lvmpartition
              Only report PVs.

       --nohints
              Do  not  use the hints file to locate devices for PVs. A command may read more devices
              to find PVs when hints are not used. The command will still perform standard hint file
              invalidation where appropriate.

       --nolocking
              Disable locking. Use with caution, concurrent commands may produce incorrect  results.


       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress  output  and  log  messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --readonly
              Run the command in a special read-only mode which will read on-disk  metadata  without
              needing  to take any locks. This can be used to peek inside metadata used by a virtual
              machine image while the virtual machine is running. No attempt will be made to  commu‐
              nicate  with  the  device-mapper  kernel  driver,  so  this option is unable to report
              whether or not LVs are actually in use.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is implemented by disabling
              all metadata writing but nevertheless returning success to the calling function.  This
              may lead to unusual error messages in multi-stage operations if a tool relies on read‐
              ing back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to
              stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do  not  prompt  for  confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES
       String See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional unit.  Input units are always treated
              as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.
              The default input unit is specified by letter, followed  by  |UNIT.   UNIT  represents
              other possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M
              is  MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.  (This should not be confused
              with the output control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For example, LVM_VG_NAME
       can generally be substituted for a required VG parameter.

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8),
       pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
       vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
       vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
       vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8),
       lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)

Red Hat, Inc.                     LVM TOOLS 2.03.16(2) (2022-05-18)                   LVMDISKSCAN(8)