{
    "mode": "man",
    "parameter": "vgremove",
    "section": "8",
    "url": "https://www.chedong.com/phpMan.php/man/vgremove/8/json",
    "generated": "2026-10-20T09:41:49Z",
    "synopsis": "vgremove positionargs\n[ optionargs ]",
    "sections": {
        "NAME": {
            "content": "vgremove — Remove volume group(s)\n",
            "subsections": []
        },
        "SYNOPSIS": {
            "content": "vgremove positionargs\n[ optionargs ]\n",
            "subsections": []
        },
        "DESCRIPTION": {
            "content": "vgremove  removes one or more VGs. If LVs exist in the VG, a prompt is used to confirm LV re‐\nmoval.\n\nIf one or more PVs in the VG are lost, consider vgreduce --removemissing to make the VG meta‐\ndata consistent again.\n\nRepeat the force option (-ff) to forcibly remove LVs in the VG without confirmation.\n",
            "subsections": []
        },
        "USAGE": {
            "content": "vgremove VG|Tag|Select ...\n[ -f|--force ]\n[ -S|--select String ]\n[    --noudevsync ]\n[    --reportformat basic|json ]\n[ COMMONOPTIONS ]\n\nCommon options for lvm:\n[ -d|--debug ]\n[ -h|--help ]\n[ -q|--quiet ]\n[ -t|--test ]\n[ -v|--verbose ]\n[ -y|--yes ]\n[    --commandprofile String ]\n[    --config String ]\n[    --devices PV ]\n[    --devicesfile String ]\n[    --driverloaded y|n ]\n[    --journal String ]\n[    --lockopt String ]\n[    --longhelp ]\n[    --nohints ]\n[    --nolocking ]\n[    --profile String ]\n[    --version ]\n",
            "subsections": []
        },
        "OPTIONS": {
            "content": "--commandprofile String\nThe command profile to use for command configuration.  See lvm.conf(5) for more infor‐\nmation about profiles.\n\n--config String\nConfig settings for the command. These override lvm.conf(5) settings.  The String  arg\nuses the same format as lvm.conf(5), or may use section/field syntax.  See lvm.conf(5)\nfor more information about config.\n",
            "subsections": [
                {
                    "name": "-d --debug",
                    "content": "Set  debug  level. Repeat from 1 to 6 times to increase the detail of messages sent to\nthe log file and/or syslog (if configured).\n\n--devices PV\nRestricts the devices that are visible and accessible to  the  command.   Devices  not\nlisted will appear to be missing. This option can be repeated, or accepts a comma sep‐\narated list of devices. This overrides the devices file.\n\n--devicesfile String\nA  file listing devices that LVM should use.  The file must exist in /etc/lvm/devices/\nand is managed with the lvmdevices(8) command.  This  overrides  the  lvm.conf(5)  de‐\nvices/devicesfile and devices/usedevicesfile settings.\n\n--driverloaded y|n\nIf  set to no, the command will not attempt to use device-mapper.  For testing and de‐\nbugging.\n",
                    "flag": "-d",
                    "long": "--debug"
                },
                {
                    "name": "-f --force",
                    "content": "Override various checks, confirmations and protections.  Use with extreme caution.\n",
                    "flag": "-f",
                    "long": "--force"
                },
                {
                    "name": "-h --help",
                    "content": "Display help text.\n\n--journal String\nRecord information in the systemd journal.  This information is in addition to  infor‐\nmation enabled by the lvm.conf log/journal setting.  command: record information about\nthe  command.   output: record the default command output.  debug: record full command\ndebugging.\n\n--lockopt String\nUsed to pass options for special cases to lvmlockd.  See lvmlockd(8) for more informa‐\ntion.\n",
                    "flag": "-h",
                    "long": "--help"
                },
                {
                    "name": "--longhelp",
                    "content": "Display long help text.\n",
                    "long": "--longhelp"
                },
                {
                    "name": "--nohints",
                    "content": "Do not use the hints file to locate devices for PVs. A command may read  more  devices\nto find PVs when hints are not used. The command will still perform standard hint file\ninvalidation where appropriate.\n",
                    "long": "--nohints"
                },
                {
                    "name": "--nolocking",
                    "content": "Disable  locking. Use with caution, concurrent commands may produce incorrect results.\n\n",
                    "long": "--nolocking"
                },
                {
                    "name": "--noudevsync",
                    "content": "Disables udev synchronisation. The process will not wait for notification  from  udev.\nIt  will continue irrespective of any possible udev processing in the background. Only\nuse this if udev is not running or has rules that ignore the devices LVM creates.\n\n--profile String\nAn alias for --commandprofile or --metadataprofile, depending on the command.\n",
                    "long": "--noudevsync"
                },
                {
                    "name": "-q --quiet",
                    "content": "Suppress output and log messages. Overrides --debug and  --verbose.   Repeat  once  to\nalso suppress any prompts with answer 'no'.\n\n--reportformat basic|json\nOverrides  current  output  format  for  reports  which is defined globally by the re‐\nport/outputformat setting in lvm.conf(5).  basic is the original format with  columns\nand  rows.  If there is more than one report per command, each report is prefixed with\nthe report name for identification. json produces report output in  JSON  format.  See\nlvmreport(7) for more information.\n",
                    "flag": "-q",
                    "long": "--quiet"
                },
                {
                    "name": "-S --select _",
                    "content": "Select objects for processing and reporting based on specified criteria.  The criteria\nsyntax  is  described  by --select help and lvmreport(7).  For reporting commands, one\nrow is displayed for each object matching the criteria.  See --options help for selec‐\ntable object fields.  Rows can be displayed with an additional  \"selected\"  field  (-o\nselected) showing 1 if the row matches the selection and 0 otherwise.  For non-report‐\ning  commands  which  process  LVM  entities, the selection is used to choose items to\nprocess.\n",
                    "flag": "-S",
                    "long": "--select"
                },
                {
                    "name": "-t --test",
                    "content": "Run in test mode. Commands will not update metadata.  This is implemented by disabling\nall metadata writing but nevertheless returning success to the calling function.  This\nmay lead to unusual error messages in multi-stage operations if a tool relies on read‐\ning back metadata it believes has changed but hasn't.\n",
                    "flag": "-t",
                    "long": "--test"
                },
                {
                    "name": "-v --verbose",
                    "content": "Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to\nstdout and stderr.\n",
                    "flag": "-v",
                    "long": "--verbose"
                },
                {
                    "name": "--version",
                    "content": "Display version information.\n",
                    "long": "--version"
                },
                {
                    "name": "-y --yes",
                    "content": "Do  not  prompt  for  confirmation interactively but always assume the answer yes. Use\nwith extreme caution.  (For automatic no, see -qq.)\n",
                    "flag": "-y",
                    "long": "--yes"
                }
            ]
        },
        "VARIABLES": {
            "content": "VG     Volume Group name.  See lvm(8) for valid names.\n\nTag    Tag name.  See lvm(8) for information about tag names and using tags in place of a VG,\nLV or PV.\n\nSelect Select indicates that a required positional parameter can be omitted if  the  --select\noption is used.  No arg appears in this position.\n\nString See the option description for information about the string content.\n\nSize[UNIT]\nSize is an input number that accepts an optional unit.  Input units are always treated\nas base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.\nThe  default  input  unit  is specified by letter, followed by |UNIT.  UNIT represents\nother possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M\nis MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.  (This should not be  confused\nwith the output control --units, where capital letters mean multiple of 1000.)\n",
            "subsections": []
        },
        "ENVIRONMENT VARIABLES": {
            "content": "See lvm(8) for information about environment variables used by lvm.  For example, LVMVGNAME\ncan generally be substituted for a required VG parameter.\n",
            "subsections": []
        },
        "SEE ALSO": {
            "content": "lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),\n\npvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8),\npvscan(8),\n\nvgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),\nvgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),\nvgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),\nvgsplit(8),\n\nlvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8),\nlvrename(8), lvresize(8), lvs(8), lvscan(8),\n\nlvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),\n\ndmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),\n\nlvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)\n\nRed Hat, Inc.                     LVM TOOLS 2.03.16(2) (2022-05-18)                      VGREMOVE(8)",
            "subsections": []
        }
    },
    "summary": "vgremove — Remove volume group(s)",
    "flags": [
        {
            "flag": "-d",
            "long": "--debug",
            "arg": null,
            "description": "Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). --devices PV Restricts the devices that are visible and accessible to the command. Devices not listed will appear to be missing. This option can be repeated, or accepts a comma sep‐ arated list of devices. This overrides the devices file. --devicesfile String A file listing devices that LVM should use. The file must exist in /etc/lvm/devices/ and is managed with the lvmdevices(8) command. This overrides the lvm.conf(5) de‐ vices/devicesfile and devices/usedevicesfile settings. --driverloaded y|n If set to no, the command will not attempt to use device-mapper. For testing and de‐ bugging."
        },
        {
            "flag": "-f",
            "long": "--force",
            "arg": null,
            "description": "Override various checks, confirmations and protections. Use with extreme caution."
        },
        {
            "flag": "-h",
            "long": "--help",
            "arg": null,
            "description": "Display help text. --journal String Record information in the systemd journal. This information is in addition to infor‐ mation enabled by the lvm.conf log/journal setting. command: record information about the command. output: record the default command output. debug: record full command debugging. --lockopt String Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more informa‐ tion."
        },
        {
            "flag": "",
            "long": "--longhelp",
            "arg": null,
            "description": "Display long help text."
        },
        {
            "flag": "",
            "long": "--nohints",
            "arg": null,
            "description": "Do not use the hints file to locate devices for PVs. A command may read more devices to find PVs when hints are not used. The command will still perform standard hint file invalidation where appropriate."
        },
        {
            "flag": "",
            "long": "--nolocking",
            "arg": null,
            "description": "Disable locking. Use with caution, concurrent commands may produce incorrect results."
        },
        {
            "flag": "",
            "long": "--noudevsync",
            "arg": null,
            "description": "Disables udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible udev processing in the background. Only use this if udev is not running or has rules that ignore the devices LVM creates. --profile String An alias for --commandprofile or --metadataprofile, depending on the command."
        },
        {
            "flag": "-q",
            "long": "--quiet",
            "arg": null,
            "description": "Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer 'no'. --reportformat basic|json Overrides current output format for reports which is defined globally by the re‐ port/outputformat setting in lvm.conf(5). basic is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. json produces report output in JSON format. See lvmreport(7) for more information."
        },
        {
            "flag": "-S",
            "long": "--select",
            "arg": null,
            "description": "Select objects for processing and reporting based on specified criteria. The criteria syntax is described by --select help and lvmreport(7). For reporting commands, one row is displayed for each object matching the criteria. See --options help for selec‐ table object fields. Rows can be displayed with an additional \"selected\" field (-o selected) showing 1 if the row matches the selection and 0 otherwise. For non-report‐ ing commands which process LVM entities, the selection is used to choose items to process."
        },
        {
            "flag": "-t",
            "long": "--test",
            "arg": null,
            "description": "Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on read‐ ing back metadata it believes has changed but hasn't."
        },
        {
            "flag": "-v",
            "long": "--verbose",
            "arg": null,
            "description": "Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr."
        },
        {
            "flag": "",
            "long": "--version",
            "arg": null,
            "description": "Display version information."
        },
        {
            "flag": "-y",
            "long": "--yes",
            "arg": null,
            "description": "Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see -qq.)"
        }
    ],
    "examples": [],
    "see_also": [
        {
            "name": "lvm",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm/8/json"
        },
        {
            "name": "lvm.conf",
            "section": "5",
            "url": "https://www.chedong.com/phpMan.php/man/lvm.conf/5/json"
        },
        {
            "name": "lvmconfig",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmconfig/8/json"
        },
        {
            "name": "lvmdevices",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmdevices/8/json"
        },
        {
            "name": "pvchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvchange/8/json"
        },
        {
            "name": "pvck",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvck/8/json"
        },
        {
            "name": "pvcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvcreate/8/json"
        },
        {
            "name": "pvdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvdisplay/8/json"
        },
        {
            "name": "pvmove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvmove/8/json"
        },
        {
            "name": "pvremove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvremove/8/json"
        },
        {
            "name": "pvresize",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvresize/8/json"
        },
        {
            "name": "pvs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvs/8/json"
        },
        {
            "name": "pvscan",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvscan/8/json"
        },
        {
            "name": "vgcfgbackup",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcfgbackup/8/json"
        },
        {
            "name": "vgcfgrestore",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcfgrestore/8/json"
        },
        {
            "name": "vgchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgchange/8/json"
        },
        {
            "name": "vgck",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgck/8/json"
        },
        {
            "name": "vgcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcreate/8/json"
        },
        {
            "name": "vgconvert",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgconvert/8/json"
        },
        {
            "name": "vgdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgdisplay/8/json"
        },
        {
            "name": "vgexport",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgexport/8/json"
        },
        {
            "name": "vgextend",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgextend/8/json"
        },
        {
            "name": "vgimport",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgimport/8/json"
        },
        {
            "name": "vgimportclone",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgimportclone/8/json"
        },
        {
            "name": "vgimportdevices",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgimportdevices/8/json"
        },
        {
            "name": "vgmerge",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgmerge/8/json"
        },
        {
            "name": "vgmknodes",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgmknodes/8/json"
        },
        {
            "name": "vgreduce",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgreduce/8/json"
        },
        {
            "name": "vgrename",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgrename/8/json"
        },
        {
            "name": "vgs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgs/8/json"
        },
        {
            "name": "vgscan",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgscan/8/json"
        },
        {
            "name": "vgsplit",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgsplit/8/json"
        },
        {
            "name": "lvcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvcreate/8/json"
        },
        {
            "name": "lvchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvchange/8/json"
        },
        {
            "name": "lvconvert",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvconvert/8/json"
        },
        {
            "name": "lvdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvdisplay/8/json"
        },
        {
            "name": "lvextend",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvextend/8/json"
        },
        {
            "name": "lvreduce",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvreduce/8/json"
        },
        {
            "name": "lvremove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvremove/8/json"
        },
        {
            "name": "lvrename",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvrename/8/json"
        },
        {
            "name": "lvresize",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvresize/8/json"
        },
        {
            "name": "lvs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvs/8/json"
        },
        {
            "name": "lvscan",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvscan/8/json"
        },
        {
            "name": "lvm-fullreport",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm-fullreport/8/json"
        },
        {
            "name": "lvm-lvpoll",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm-lvpoll/8/json"
        },
        {
            "name": "blkdeactivate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/blkdeactivate/8/json"
        },
        {
            "name": "lvmdump",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmdump/8/json"
        },
        {
            "name": "dmeventd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/dmeventd/8/json"
        },
        {
            "name": "lvmpolld",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmpolld/8/json"
        },
        {
            "name": "lvmlockd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmlockd/8/json"
        },
        {
            "name": "lvmlockctl",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmlockctl/8/json"
        },
        {
            "name": "cmirrord",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/cmirrord/8/json"
        },
        {
            "name": "lvmdbusd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmdbusd/8/json"
        },
        {
            "name": "fsadm",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/fsadm/8/json"
        },
        {
            "name": "lvmsystemid",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmsystemid/7/json"
        },
        {
            "name": "lvmreport",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmreport/7/json"
        },
        {
            "name": "lvmraid",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmraid/7/json"
        },
        {
            "name": "lvmthin",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmthin/7/json"
        },
        {
            "name": "lvmcache",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmcache/7/json"
        }
    ]
}