phpman > man > VGCK(8)

VGCK(8)                                System Manager's Manual                               VGCK(8)



NAME
       vgck - Check the consistency of volume group(s)

SYNOPSIS
       vgck option_args position_args
           [ option_args ]
           [ position_args ]

DESCRIPTION
       vgck checks LVM metadata for consistency.

USAGE
       Read and display information about a VG.

       vgck
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]
           [ VG|Tag ... ]

       Rewrite VG metadata to correct problems.

       vgck --updatemetadata VG
           [ COMMON_OPTIONS ]

       Common options for command:

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --driverloaded y|n ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS
       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more infor‐
              mation about profiles.

       --config String
              Config settings for the command. These override lvm.conf settings.  The String arg
              uses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)
              for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to
              the log file and/or syslog (if configured).

       --driverloaded y|n
              If set to no, the command will not attempt to use device-mapper.  For testing and de‐
              bugging.

       -h|--help
              Display help text.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more informa‐
              tion.

       --longhelp
              Display long help text.

       --nolocking
              Disable locking.

       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --reportformat basic|json
              Overrides current output format for reports which is defined globally by the re‐
              port/output_format setting in lvm.conf.  basic is the original format with columns and
              rows.  If there is more than one report per command, each report is prefixed with the
              report name for identification. json produces report output in JSON format. See lvmre‐‐
              port(7) for more information.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is implemented by disabling
              all metadata writing but nevertheless returning success to the calling function. This
              may lead to unusual error messages in multi-stage operations if a tool relies on read‐
              ing back metadata it believes has changed but hasn't.

       --updatemetadata
              Update VG metadata to correct problems.  If VG metadata was updated while a PV was
              missing, and the PV reappears with an old version of metadata, then this option (or
              any other command that writes metadata) will update the metadata on the previously
              missing PV. If a PV was removed from a VG while it was missing, and the PV reappears,
              using this option will clear the outdated metadata from the previously missing PV. If
              metadata text is damaged on one PV, using this option will replace the damaged meta‐
              data text. For more severe damage, e.g. with headers, see pvck(8).

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to
              stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES
       VG
              Volume Group name.  See lvm(8) for valid names.

       Tag
              Tag name.  See lvm(8) for information about tag names and using tags in place of a VG,
              LV or PV.

       String
              See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional unit.  Input units are always treated
              as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.
              The default input unit is specified by letter, followed  by  |UNIT.   UNIT  represents
              other  possible  input  units:  bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is sectors of 512
              bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.   (This
              should  not  be  confused  with the output control --units, where capital letters mean
              multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For example, LVM_VG_NAME
       can generally be substituted for a required VG parameter.

SEE ALSO
       lvm(8) lvm.conf(5) lvmconfig(8)

       pvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8) pvmove(8) pvremove(8) pvresize(8) pvs(8) pvs‐‐
       can(8)

       vgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8)  vg‐‐
       export(8)  vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgre‐‐
       move(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)

       lvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8)  lvremove(8)  lvre‐‐
       name(8) lvresize(8) lvs(8) lvscan(8)

       lvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)

       dmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)

       lvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)



Red Hat, Inc.                     LVM TOOLS 2.03.11(2) (2021-01-08)                          VGCK(8)