On Apache
Under GNU General Public License
2024-04-20 08:08 @18.116.63.236 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
SENDMAIL(1) General Commands Manual SENDMAIL(1)
NAME
sendmail - Postfix to Sendmail compatibility interface
SYNOPSIS
sendmail [option ...] [recipient ...]
mailq
sendmail -bp
newaliases
sendmail -I
DESCRIPTION
The Postfix sendmail(1) command implements the Postfix to Sendmail compatibility inter-
face. For the sake of compatibility with existing applications, some Sendmail com-
mand-line options are recognized but silently ignored.
By default, Postfix sendmail(1) reads a message from standard input until EOF or until it
reads a line with only a . character, and arranges for delivery. Postfix sendmail(1) re-
lies on the postdrop(1) command to create a queue file in the maildrop directory.
Specific command aliases are provided for other common modes of operation:
mailq List the mail queue. Each entry shows the queue file ID, message size, arrival
time, sender, and the recipients that still need to be delivered. If mail could
not be delivered upon the last attempt, the reason for failure is shown. The queue
ID string is followed by an optional status character:
* The message is in the active queue, i.e. the message is selected for deliv-
ery.
! The message is in the hold queue, i.e. no further delivery attempt will be
made until the mail is taken off hold.
This mode of operation is implemented by executing the postqueue(1) command.
newaliases
Initialize the alias database. If no input file is specified (with the -oA option,
see below), the program processes the file(s) specified with the alias_database
configuration parameter. If no alias database type is specified, the program uses
the type specified with the default_database_type configuration parameter. This
mode of operation is implemented by running the postalias(1) command.
Note: it may take a minute or so before an alias database update becomes visible.
Use the "postfix reload" command to eliminate this delay.
These and other features can be selected by specifying the appropriate combination of com-
mand-line options. Some features are controlled by parameters in the main.cf configuration
file.
The following options are recognized:
-Am (ignored)
-Ac (ignored)
Postfix sendmail uses the same configuration file regardless of whether or not a
message is an initial submission.
-B body_type
The message body MIME type: 7BIT or 8BITMIME.
-bd Go into daemon mode. This mode of operation is implemented by executing the "post-
fix start" command.
-bh (ignored)
-bH (ignored)
Postfix has no persistent host status database.
-bi Initialize alias database. See the newaliases command above.
-bl Go into daemon mode. To accept only local connections as with Sendmail's -bl op-
tion, specify "inet_interfaces = loopback" in the Postfix main.cf configuration
file.
-bm Read mail from standard input and arrange for delivery. This is the default mode
of operation.
-bp List the mail queue. See the mailq command above.
-bs Stand-alone SMTP server mode. Read SMTP commands from standard input, and write re-
sponses to standard output. In stand-alone SMTP server mode, mail relaying and
other access controls are disabled by default. To enable them, run the process as
the mail_owner user.
This mode of operation is implemented by running the smtpd(8) daemon.
-bv Do not collect or deliver a message. Instead, send an email report after verifying
each recipient address. This is useful for testing address rewriting and routing
configurations.
This feature is available in Postfix version 2.1 and later.
-C config_file
-C config_dir
The path name of the Postfix main.cf file, or of its parent directory. This infor-
mation is ignored with Postfix versions before 2.3.
With Postfix version 3.2 and later, a non-default directory must be authorized in
the default main.cf file, through the alternate_config_directories or multi_in-
stance_directories parameters.
With all Postfix versions, you can specify a directory pathname with the MAIL_CON-
FIG environment variable to override the location of configuration files.
-F full_name
Set the sender full name. This overrides the NAME environment variable, and is used
only with messages that have no From: message header.
-f sender
Set the envelope sender address. This is the address where delivery problems are
sent to. With Postfix versions before 2.1, the Errors-To: message header overrides
the error return address.
-G Gateway (relay) submission, as opposed to initial user submission. Either do not
rewrite addresses at all, or update incomplete addresses with the domain informa-
tion specified with remote_header_rewrite_domain.
This option is ignored before Postfix version 2.3.
-h hop_count (ignored)
Hop count limit. Use the hopcount_limit configuration parameter instead.
-I Initialize alias database. See the newaliases command above.
-i When reading a message from standard input, don't treat a line with only a . char-
acter as the end of input.
-L label (ignored)
The logging label. Use the syslog_name configuration parameter instead.
-m (ignored)
Backwards compatibility.
-N dsn (default: 'delay, failure')
Delivery status notification control. Specify either a comma-separated list with
one or more of failure (send notification when delivery fails), delay (send notifi-
cation when delivery is delayed), or success (send notification when the message is
delivered); or specify never (don't send any notifications at all).
This feature is available in Postfix 2.3 and later.
-n (ignored)
Backwards compatibility.
-oAalias_database
Non-default alias database. Specify pathname or type:pathname. See postalias(1) for
details.
-O option=value (ignored)
Set the named option to value. Use the equivalent configuration parameter in
main.cf instead.
-o7 (ignored)
-o8 (ignored)
To send 8-bit or binary content, use an appropriate MIME encapsulation and specify
the appropriate -B command-line option.
-oi When reading a message from standard input, don't treat a line with only a . char-
acter as the end of input.
-om (ignored)
The sender is never eliminated from alias etc. expansions.
-o x value (ignored)
Set option x to value. Use the equivalent configuration parameter in main.cf in-
stead.
-r sender
Set the envelope sender address. This is the address where delivery problems are
sent to. With Postfix versions before 2.1, the Errors-To: message header overrides
the error return address.
-R return
Delivery status notification control. Specify "hdrs" to return only the header
when a message bounces, "full" to return a full copy (the default behavior).
The -R option specifies an upper bound; Postfix will return only the header, when a
full copy would exceed the bounce_size_limit setting.
This option is ignored before Postfix version 2.10.
-q Attempt to deliver all queued mail. This is implemented by executing the
postqueue(1) command.
Warning: flushing undeliverable mail frequently will result in poor delivery per-
formance of all other mail.
-qinterval (ignored)
The interval between queue runs. Use the queue_run_delay configuration parameter
instead.
-qIqueueid
Schedule immediate delivery of mail with the specified queue ID. This option is
implemented by executing the postqueue(1) command, and is available with Postfix
version 2.4 and later.
-qRsite
Schedule immediate delivery of all mail that is queued for the named site. This op-
tion accepts only site names that are eligible for the "fast flush" service, and is
implemented by executing the postqueue(1) command. See flush(8) for more informa-
tion about the "fast flush" service.
-qSsite
This command is not implemented. Use the slower "sendmail -q" command instead.
-t Extract recipients from message headers. These are added to any recipients speci-
fied on the command line.
With Postfix versions prior to 2.1, this option requires that no recipient ad-
dresses are specified on the command line.
-U (ignored)
Initial user submission.
-V envid
Specify the envelope ID for notification by servers that support DSN.
This feature is available in Postfix 2.3 and later.
-XV (Postfix 2.2 and earlier: -V)
Variable Envelope Return Path. Given an envelope sender address of the form
owner-listname@origin, each recipient user@domain receives mail with a personalized
envelope sender address.
By default, the personalized envelope sender address is owner-listname+user=do-
main@origin. The default + and = characters are configurable with the de-
fault_verp_delimiters configuration parameter.
-XVxy (Postfix 2.2 and earlier: -Vxy)
As -XV, but uses x and y as the VERP delimiter characters, instead of the charac-
ters specified with the default_verp_delimiters configuration parameter.
-v Send an email report of the first delivery attempt (Postfix versions 2.1 and
later). Mail delivery always happens in the background. When multiple -v options
are given, enable verbose logging for debugging purposes.
-X log_file (ignored)
Log mailer traffic. Use the debug_peer_list and debug_peer_level configuration pa-
rameters instead.
SECURITY
By design, this program is not set-user (or group) id. However, it must handle data from
untrusted, possibly remote, users. Thus, the usual precautions need to be taken against
malicious inputs.
DIAGNOSTICS
Problems are logged to syslogd(8) or postlogd(8), and to the standard error stream.
ENVIRONMENT
MAIL_CONFIG
Directory with Postfix configuration files.
MAIL_VERBOSE (value does not matter)
Enable verbose logging for debugging purposes.
MAIL_DEBUG (value does not matter)
Enable debugging with an external command, as specified with the debugger_command
configuration parameter.
NAME The sender full name. This is used only with messages that have no From: message
header. See also the -F option above.
CONFIGURATION PARAMETERS
The following main.cf parameters are especially relevant to this program. The text below
provides only a parameter summary. See postconf(5) for more details including examples.
COMPATIBILITY CONTROLS
Available with Postfix 2.9 and later:
sendmail_fix_line_endings (always)
Controls how the Postfix sendmail command converts email message line endings from
<CR><LF> into UNIX format (<LF>).
TROUBLE SHOOTING CONTROLS
The DEBUG_README file gives examples of how to troubleshoot a Postfix system.
debugger_command (empty)
The external command to execute when a Postfix daemon program is invoked with the
-D option.
debug_peer_level (2)
The increment in verbose logging level when a remote client or server matches a
pattern in the debug_peer_list parameter.
debug_peer_list (empty)
Optional list of remote client or server hostname or network address patterns that
cause the verbose logging level to increase by the amount specified in $de-
bug_peer_level.
ACCESS CONTROLS
Available in Postfix version 2.2 and later:
authorized_flush_users (static:anyone)
List of users who are authorized to flush the queue.
authorized_mailq_users (static:anyone)
List of users who are authorized to view the queue.
authorized_submit_users (static:anyone)
List of users who are authorized to submit mail with the sendmail(1) command (and
with the privileged postdrop(1) helper command).
RESOURCE AND RATE CONTROLS
bounce_size_limit (50000)
The maximal amount of original message text that is sent in a non-delivery notifi-
cation.
fork_attempts (5)
The maximal number of attempts to fork() a child process.
fork_delay (1s)
The delay between attempts to fork() a child process.
hopcount_limit (50)
The maximal number of Received: message headers that is allowed in the primary
message headers.
queue_run_delay (300s)
The time between deferred queue scans by the queue manager; prior to Postfix 2.4
the default value was 1000s.
FAST FLUSH CONTROLS
The ETRN_README file describes configuration and operation details for the Postfix "fast
flush" service.
fast_flush_domains ($relay_domains)
Optional list of destinations that are eligible for per-destination logfiles with
mail that is queued to those destinations.
VERP CONTROLS
The VERP_README file describes configuration and operation details of Postfix support for
variable envelope return path addresses.
default_verp_delimiters (+=)
The two default VERP delimiter characters.
verp_delimiter_filter (-=+)
The characters Postfix accepts as VERP delimiter characters on the Postfix send-
mail(1) command line and in SMTP commands.
MISCELLANEOUS CONTROLS
alias_database (see 'postconf -d' output)
The alias databases for local(8) delivery that are updated with "newaliases" or
with "sendmail -bi".
command_directory (see 'postconf -d' output)
The location of all postfix administrative commands.
config_directory (see 'postconf -d' output)
The default location of the Postfix main.cf and master.cf configuration files.
daemon_directory (see 'postconf -d' output)
The directory with Postfix support programs and daemon programs.
default_database_type (see 'postconf -d' output)
The default database type for use in newaliases(1), postalias(1) and postmap(1)
commands.
delay_warning_time (0h)
The time after which the sender receives a copy of the message headers of mail that
is still queued.
import_environment (see 'postconf -d' output)
The list of environment parameters that a privileged Postfix process will import
from a non-Postfix parent process, or name=value environment overrides.
mail_owner (postfix)
The UNIX system account that owns the Postfix queue and most Postfix daemon pro-
cesses.
queue_directory (see 'postconf -d' output)
The location of the Postfix top-level queue directory.
remote_header_rewrite_domain (empty)
Don't rewrite message headers from remote clients at all when this parameter is
empty; otherwise, rewrite message headers and append the specified domain name to
incomplete addresses.
syslog_facility (mail)
The syslog facility of Postfix logging.
syslog_name (see 'postconf -d' output)
A prefix that is prepended to the process name in syslog records, so that, for ex-
ample, "smtpd" becomes "prefix/smtpd".
Postfix 3.2 and later:
alternate_config_directories (empty)
A list of non-default Postfix configuration directories that may be specified with
"-c config_directory" on the command line (in the case of sendmail(1), with the
"-C" option), or via the MAIL_CONFIG environment parameter.
multi_instance_directories (empty)
An optional list of non-default Postfix configuration directories; these directo-
ries belong to additional Postfix instances that share the Postfix executable files
and documentation with the default Postfix instance, and that are started, stopped,
etc., together with the default Postfix instance.
FILES
/var/spool/postfix, mail queue
/etc/postfix, configuration files
SEE ALSO
pickup(8), mail pickup daemon
qmgr(8), queue manager
smtpd(8), SMTP server
flush(8), fast flush service
postsuper(1), queue maintenance
postalias(1), create/update/query alias database
postdrop(1), mail posting utility
postfix(1), mail system control
postqueue(1), mail queue control
postlogd(8), Postfix logging
syslogd(8), system logging
README_FILES
Use "postconf readme_directory" or "postconf html_directory" to locate this information.
DEBUG_README, Postfix debugging howto
ETRN_README, Postfix ETRN howto
VERP_README, Postfix VERP howto
LICENSE
The Secure Mailer license must be distributed with this software.
AUTHOR(S)
Wietse Venema
IBM T.J. Watson Research
P.O. Box 704
Yorktown Heights, NY 10598, USA
Wietse Venema
Google, Inc.
111 8th Avenue
New York, NY 10011, USA
SENDMAIL(1)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-20 08:08 @18.116.63.236 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)