man > LVSCAN

LVSCAN(8)                              System Manager's Manual                             LVSCAN(8)

NAME
       lvscan — List all logical volumes in all volume groups

SYNOPSIS
       lvscan
           [ option_args ]

DESCRIPTION
       lvscan  scans  all  VGs  or all supported LVM block devices in the system for LVs. The output
       consists of one line for each LV indicating whether or not it is active, a snapshot  or  ori‐
       gin,  the  size of the device and its allocation policy. Use lvs(8) or lvdisplay(8) to obtain
       more comprehensive information about LVs.

USAGE
       lvscan
           [ -a|--all ]
           [ -b|--blockdevice ]
           [    --ignorelockingfailure ]
           [    --readonly ]
           [    --reportformat basic|json ]
           [ COMMON_OPTIONS ]

       Common options for lvm:
           [ -d|--debug ]
           [ -h|--help ]
           [ -q|--quiet ]
           [ -t|--test ]
           [ -v|--verbose ]
           [ -y|--yes ]
           [    --commandprofile String ]
           [    --config String ]
           [    --devices PV ]
           [    --devicesfile String ]
           [    --driverloaded y|n ]
           [    --journal String ]
           [    --lockopt String ]
           [    --longhelp ]
           [    --nohints ]
           [    --nolocking ]
           [    --profile String ]
           [    --version ]

OPTIONS


       -a|--all
              Show information about internal LVs.  These are components of normal LVs, such as mir‐
              rors, which are not independently accessible, e.g. not mountable.

       -b|--blockdevice
              No longer used.

       --commandprofile String
              The command profile to use for command configuration.  See lvm.conf(5) for more infor‐
              mation about profiles.

       --config String
              Config settings for the command. These override lvm.conf(5) settings.  The String  arg
              uses the same format as lvm.conf(5), or may use section/field syntax.  See lvm.conf(5)
              for more information about config.

       -d|--debug ...
              Set  debug  level. Repeat from 1 to 6 times to increase the detail of messages sent to
              the log file and/or syslog (if configured).

       --devices PV
              Restricts the devices that are visible and accessible to  the  command.   Devices  not
              listed will appear to be missing. This option can be repeated, or accepts a comma sep‐
              arated list of devices. This overrides the devices file.

       --devicesfile String
              A  file listing devices that LVM should use.  The file must exist in /etc/lvm/devices/
              and is managed with the lvmdevices(8) command.  This  overrides  the  lvm.conf(5)  de‐
              vices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If  set to no, the command will not attempt to use device-mapper.  For testing and de‐
              bugging.

       -h|--help
              Display help text.

       --ignorelockingfailure
              Allows a command to continue with read-only metadata operations  after  locking  fail‐
              ures.

       --journal String
              Record  information in the systemd journal.  This information is in addition to infor‐
              mation enabled by the lvm.conf log/journal setting.  command: record information about
              the command.  output: record the default command output.  debug: record  full  command
              debugging.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See lvmlockd(8) for more informa‐
              tion.

       --longhelp
              Display long help text.

       --nohints
              Do  not  use the hints file to locate devices for PVs. A command may read more devices
              to find PVs when hints are not used. The command will still perform standard hint file
              invalidation where appropriate.

       --nolocking
              Disable locking. Use with caution, concurrent commands may produce incorrect  results.


       --profile String
              An alias for --commandprofile or --metadataprofile, depending on the command.

       -q|--quiet ...
              Suppress  output  and  log  messages. Overrides --debug and --verbose.  Repeat once to
              also suppress any prompts with answer 'no'.

       --readonly
              Run the command in a special read-only mode which will read on-disk  metadata  without
              needing  to take any locks. This can be used to peek inside metadata used by a virtual
              machine image while the virtual machine is running. No attempt will be made to  commu‐
              nicate  with  the  device-mapper  kernel  driver,  so  this option is unable to report
              whether or not LVs are actually in use.

       --reportformat basic|json
              Overrides current output format for reports which  is  defined  globally  by  the  re‐
              port/output_format  setting in lvm.conf(5).  basic is the original format with columns
              and rows.  If there is more than one report per command, each report is prefixed  with
              the  report  name  for identification. json produces report output in JSON format. See
              lvmreport(7) for more information.

       -t|--test
              Run in test mode. Commands will not update metadata.  This is implemented by disabling
              all metadata writing but nevertheless returning success to the calling function.  This
              may lead to unusual error messages in multi-stage operations if a tool relies on read‐
              ing back metadata it believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to
              stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do  not  prompt  for  confirmation interactively but always assume the answer yes. Use
              with extreme caution.  (For automatic no, see -qq.)

VARIABLES
       String See the option description for information about the string content.

       Size[UNIT]
              Size is an input number that accepts an optional unit.  Input units are always treated
              as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.
              The default input unit is specified by letter, followed  by  |UNIT.   UNIT  represents
              other possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M
              is  MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.  (This should not be confused
              with the output control --units, where capital letters mean multiple of 1000.)

ENVIRONMENT VARIABLES
       See lvm(8) for information about environment variables used by lvm.  For example, LVM_VG_NAME
       can generally be substituted for a required VG parameter.

SEE ALSO
       lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

       pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8),
       pvscan(8),

       vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8),
       vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
       vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8),
       vgsplit(8),

       lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8),
       lvrename(8), lvresize(8), lvs(8), lvscan(8),

       lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),

       dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

       lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)

Red Hat, Inc.                     LVM TOOLS 2.03.16(2) (2022-05-18)                        LVSCAN(8)