MEM(4) - phpMan

MEM(4) Linux Programmer's Manual MEM(4)

NAME
mem, kmem, port - system memory, kernel memory and system ports

DESCRIPTION
/dev/mem is a character device file that is an image of the main memory of the computer.
It may be used, for example, to examine (and even patch) the system.

Byte addresses in /dev/mem are interpreted as physical memory addresses. References to
nonexistent locations cause errors to be returned.

Examining and patching is likely to lead to unexpected results when read-only or write-
only bits are present.

Since Linux 2.6.26, and depending on the architecture, the CONFIG_STRICT_DEVMEM kernel
configuration option limits the areas which can be accessed through this file. For exam-
ple: on x86, RAM access is not allowed but accessing memory-mapped PCI regions is.

It is typically created by:

mknod -m 660 /dev/mem c 1 1
chown root:kmem /dev/mem

The file /dev/kmem is the same as /dev/mem, except that the kernel virtual memory rather
than physical memory is accessed. Since Linux 2.6.26, this file is available only if the
CONFIG_DEVKMEM kernel configuration option is enabled.

It is typically created by:

mknod -m 640 /dev/kmem c 1 2
chown root:kmem /dev/kmem

/dev/port is similar to /dev/mem, but the I/O ports are accessed.

It is typically created by:

mknod -m 660 /dev/port c 1 4
chown root:kmem /dev/port

FILES
/dev/mem
/dev/kmem
/dev/port