DBI::PurePerl - phpMan

Command: man perldoc info search(apropos)  


DBI::PurePerl(3pm)             User Contributed Perl Documentation             DBI::PurePerl(3pm)

NAME
       DBI::PurePerl -- a DBI emulation using pure perl (no C/XS compilation required)

SYNOPSIS
        BEGIN { $ENV{DBI_PUREPERL} = 2 }
        use DBI;

DESCRIPTION
       This is a pure perl emulation of the DBI internals.  In almost all cases you will be
       better off using standard DBI since the portions of the standard version written in C make
       it *much* faster.

       However, if you are in a situation where it isn't possible to install a compiled version
       of standard DBI, and you're using pure-perl DBD drivers, then this module allows you to
       use most common features of DBI without needing any changes in your scripts.

EXPERIMENTAL STATUS
       DBI::PurePerl is new so please treat it as experimental pending more extensive testing.
       So far it has passed all tests with DBD::CSV, DBD::AnyData, DBD::XBase, DBD::Sprite,
       DBD::mysqlPP.  Please send bug reports to Jeff Zucker at <jeff AT vpservices.com> with a cc
       to <dbi-dev AT perl.org>.

USAGE
       The usage is the same as for standard DBI with the exception that you need to set the
       environment variable DBI_PUREPERL if you want to use the PurePerl version.

        DBI_PUREPERL == 0 (the default) Always use compiled DBI, die
                          if it isn't properly compiled & installed

        DBI_PUREPERL == 1 Use compiled DBI if it is properly compiled
                          & installed, otherwise use PurePerl

        DBI_PUREPERL == 2 Always use PurePerl

       You may set the environment variable in your shell (e.g. with set or setenv or export,
       etc) or else set it in your script like this:

        BEGIN { $ENV{DBI_PUREPERL}=2 }

       before you "use DBI;".

INSTALLATION
       In most situations simply install DBI (see the DBI pod for details).

       In the situation in which you can not install DBI itself, you may manually copy DBI.pm and
       PurePerl.pm into the appropriate directories.

       For example:

        cp DBI.pm      /usr/jdoe/mylibs/.
        cp PurePerl.pm /usr/jdoe/mylibs/DBI/.

       Then add this to the top of scripts:

        BEGIN {
          $ENV{DBI_PUREPERL} = 1;      # or =2
          unshift @INC, '/usr/jdoe/mylibs';
        }

       (Or should we perhaps patch Makefile.PL so that if DBI_PUREPERL is set to 2 prior to make,
       the normal compile process is skipped and the files are installed automatically?)

DIFFERENCES BETWEEN DBI AND DBI::PurePerl
   Attributes
       Boolean attributes still return boolean values but the actual values used may be
       different, i.e., 0 or undef instead of an empty string.

       Some handle attributes are either not supported or have very limited functionality:

         ActiveKids
         InactiveDestroy
         AutoInactiveDestroy
         Kids
         Taint
         TaintIn
         TaintOut

       (and probably others)

   Tracing
       Trace functionality is more limited and the code to handle tracing is only embedded into
       DBI:PurePerl if the DBI_TRACE environment variable is defined.  To enable total tracing
       you can set the DBI_TRACE environment variable as usual.  But to enable individual handle
       tracing using the trace() method you also need to set the DBI_TRACE environment variable,
       but set it to 0.

   Parameter Usage Checking
       The DBI does some basic parameter count checking on method calls.  DBI::PurePerl doesn't.

   Speed
       DBI::PurePerl is slower. Although, with some drivers in some contexts this may not be very
       significant for you.

       By way of example... the test.pl script in the DBI source distribution has a simple
       benchmark that just does:

           my $null_dbh = DBI->connect('dbi:NullP:','','');
           my $i = 10_000;
           $null_dbh->prepare('') while $i--;

       In other words just prepares a statement, creating and destroying a statement handle, over
       and over again.  Using the real DBI this runs at ~4550 handles per second whereas
       DBI::PurePerl manages ~2800 per second on the same machine (not too bad really).

   May not fully support hash()
       If you want to use type 1 hash, i.e., "hash($string,1)" with DBI::PurePerl, you'll need
       version 1.56 or higher of Math::BigInt (available on CPAN).

   Doesn't support preparse()
       The DBI->preparse() method isn't supported in DBI::PurePerl.

   Doesn't support DBD::Proxy
       There's a subtle problem somewhere I've not been able to identify.  DBI::ProxyServer seem
       to work fine with DBI::PurePerl but DBD::Proxy does not work 100% (which is sad because
       that would be far more useful :) Try re-enabling t/80proxy.t for DBI::PurePerl to see if
       the problem that remains will affect you're usage.

   Others
         can() - doesn't have any special behaviour

       Please let us know if you find any other differences between DBI and DBI::PurePerl.

AUTHORS
       Tim Bunce and Jeff Zucker.

       Tim provided the direction and basis for the code.  The original idea for the module and
       most of the brute force porting from C to Perl was by Jeff. Tim then reworked some core
       parts to boost the performance and accuracy of the emulation. Thanks also to Randal
       Schwartz and John Tobey for patches.

COPYRIGHT
       Copyright (c) 2002  Tim Bunce  Ireland.

       See COPYRIGHT section in DBI.pm for usage and distribution rights.

perl v5.34.0                                2022-02-06                         DBI::PurePerl(3pm)

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-07 20:17 @18.97.9.168 CrawledBy CCBot/2.0 (https://commoncrawl.org/faq/)
Valid XHTML 1.0!Valid CSS!