url - man - phpMan

Che Dong

URI(7) Linux Programmer's Manual URI(7)

NAME
uri, url, urn - uniform resource identifier (URI), including a URL or URN

SYNOPSIS
URI = [ absoluteURI | relativeURI ] [ "#" fragment ]

absoluteURI = scheme ":" ( hierarchical_part | opaque_part )

relativeURI = ( net_path | absolute_path | relative_path ) [ "?" query ]

hierarchical_part = ( net_path | absolute_path ) [ "?" query ]

net_path = "//" authority [ absolute_path ]

absolute_path = "/" path_segments

relative_path = relative_segment [ absolute_path ]

DESCRIPTION
A Uniform Resource Identifier (URI) is a short string of characters identifying an abstract
or physical resource (for example, a web page). A Uniform Resource Locator (URL) is a URI
that identifies a resource through its primary access mechanism (e.g., its network "loca‐
tion"), rather than by name or some other attribute of that resource. A Uniform Resource
Name (URN) is a URI that must remain globally unique and persistent even when the resource
ceases to exist or becomes unavailable.

URIs are the standard way to name hypertext link destinations for tools such as web browsers.
The string "http://www.kernel.org" is a URL (and thus it is also a URI). Many people use the
term URL loosely as a synonym for URI (though technically URLs are a subset of URIs).

URIs can be absolute or relative. An absolute identifier refers to a resource independent of
context, while a relative identifier refers to a resource by describing the difference from
the current context. Within a relative path reference, the complete path segments "." and
".." have special meanings: "the current hierarchy level" and "the level above this hierarchy
level", respectively, just like they do in UNIX-like systems. A path segment which contains
a colon character can't be used as the first segment of a relative URI path (e.g.,
"this:that"), because it would be mistaken for a scheme name; precede such segments with ./
(e.g., "./this:that"). Note that descendants of MS-DOS (e.g., Microsoft Windows) replace de‐
vicename colons with the vertical bar ("|") in URIs, so "C:" becomes "C|".

A fragment identifier, if included, refers to a particular named portion (fragment) of a re‐
source; text after a '#' identifies the fragment. A URI beginning with '#' refers to that
fragment in the current resource.

Usage
There are many different URI schemes, each with specific additional rules and meanings, but
they are intentionally made to be as similar as possible. For example, many URL schemes per‐
mit the authority to be the following format, called here an ip_server (square brackets show
what's optional):

ip_server = [user [ : password ] @ ] host [ : port]

This format allows you to optionally insert a username, a user plus password, and/or a port
number. The host is the name of the host computer, either its name as determined by DNS or
an IP address (numbers separated by periods). Thus the URI <http://fred:fredpassword@exam‐
ple.com:8080/> logs into a web server on host example.com as fred (using fredpassword) using
port 8080. Avoid including a password in a URI if possible because of the many security
risks of having a password written down. If the URL supplies a username but no password, and
the remote server requests a password, the program interpreting the URL should request one
from the user.

Here are some of the most common schemes in use on UNIX-like systems that are understood by
many tools. Note that many tools using URIs also have internal schemes or specialized
schemes; see those tools' documentation for information on those schemes.

http - Web (HTTP) server

http://ip_server/path
http://ip_server/path?query

This is a URL accessing a web (HTTP) server. The default port is 80. If the path refers to
a directory, the web server will choose what to return; usually if there is a file named "in‐
dex.html" or "index.htm" its content is returned, otherwise, a list of the files in the cur‐
rent directory (with appropriate links) is generated and returned. An example is
<http://lwn.net>.

A query can be given in the archaic "isindex" format, consisting of a word or phrase and not
including an equal sign (=). A query can also be in the longer "GET" format, which has one
or more query entries of the form key=value separated by the ampersand character (&). Note
that key can be repeated more than once, though it's up to the web server and its application
programs to determine if there's any meaning to that. There is an unfortunate interaction
with HTML/XML/SGML and the GET query format; when such URIs with more than one key are embed‐
ded in SGML/XML documents (including HTML), the ampersand (&) has to be rewritten as &amp;.
Note that not all queries use this format; larger forms may be too long to store as a URI, so
they use a different interaction mechanism (called POST) which does not include the data in
the URI. See the Common Gateway Interface specification at ⟨http://www.w3.org/CGI⟩ for more
information.

ftp - File Transfer Protocol (FTP)

ftp://ip_server/path

This is a URL accessing a file through the file transfer protocol (FTP). The default port
(for control) is 21. If no username is included, the username "anonymous" is supplied, and
in that case many clients provide as the password the requestor's Internet email address. An
example is <ftp://ftp.is.co.za/rfc/rfc1808.txt>.

gopher - Gopher server

gopher://ip_server/gophertype selector
gopher://ip_server/gophertype selector%09search
gopher://ip_server/gophertype selector%09search%09gopher+_string

The default gopher port is 70. gophertype is a single-character field to denote the Gopher
type of the resource to which the URL refers. The entire path may also be empty, in which
case the delimiting "/" is also optional and the gophertype defaults to "1".

selector is the Gopher selector string. In the Gopher protocol, Gopher selector strings are
a sequence of octets which may contain any octets except 09 hexadecimal (US-ASCII HT or tab),
0A hexadecimal (US-ASCII character LF), and 0D (US-ASCII character CR).

mailto - Email address

mailto:email-address

This is an email address, usually of the form name@hostname. See mailaddr(7) for more infor‐
mation on the correct format of an email address. Note that any % character must be rewrit‐
ten as %25. An example is <mailto:dwheeler AT dwheeler.com>.

news - Newsgroup or News message

news:newsgroup-name
news:message-id

A newsgroup-name is a period-delimited hierarchical name, such as "comp.infosys‐
tems.www.misc". If <newsgroup-name> is "*" (as in <news:*>), it is used to refer to "all
available news groups". An example is <news:comp.lang.ada>.

A message-id corresponds to the Message-ID of IETF RFC 1036, ⟨http://www.ietf.org/rfc
/rfc1036.txt⟩ without the enclosing "<" and ">"; it takes the form unique@full_domain_name.
A message identifier may be distinguished from a news group name by the presence of the "@"
character.

telnet - Telnet login

telnet://ip_server/

The Telnet URL scheme is used to designate interactive text services that may be accessed by
the Telnet protocol. The final "/" character may be omitted. The default port is 23. An
example is <telnet://melvyl.ucop.edu/>.

file - Normal file

file://ip_server/path_segments
file:path_segments

This represents a file or directory accessible locally. As a special case, ip_server can be
the string "localhost" or the empty string; this is interpreted as "the machine from which
the URL is being interpreted". If the path is to a directory, the viewer should display the
directory's contents with links to each containee; not all viewers currently do this. KDE
supports generated files through the URL <file:/cgi-bin>. If the given file isn't found,
browser writers may want to try to expand the filename via filename globbing (see glob(7) and
glob(3)).

The second format (e.g., <file:/etc/passwd>) is a correct format for referring to a local
file. However, older standards did not permit this format, and some programs don't recognize
this as a URI. A more portable syntax is to use an empty string as the server name, for ex‐
ample, <file:///etc/passwd>; this form does the same thing and is easily recognized by pat‐
tern matchers and older programs as a URI. Note that if you really mean to say "start from
the current location," don't specify the scheme at all; use a relative address like
<../test.txt>, which has the side-effect of being scheme-independent. An example of this
scheme is <file:///etc/passwd>.

man - Man page documentation

man:command-name
man:command-name(section)

This refers to local online manual (man) reference pages. The command name can optionally be
followed by a parenthesis and section number; see man(7) for more information on the meaning
of the section numbers. This URI scheme is unique to UNIX-like systems (such as Linux) and
is not currently registered by the IETF. An example is <man:ls(1)>.

info - Info page documentation

info:virtual-filename
info:virtual-filename#nodename
info:(virtual-filename)
info:(virtual-filename)nodename

This scheme refers to online info reference pages (generated from texinfo files), a documen‐
tation format used by programs such as the GNU tools. This URI scheme is unique to UNIX-like
systems (such as Linux) and is not currently registered by the IETF. As of this writing,
GNOME and KDE differ in their URI syntax and do not accept the other's syntax. The first two
formats are the GNOME format; in nodenames all spaces are written as underscores. The second
two formats are the KDE format; spaces in nodenames must be written as spaces, even though
this is forbidden by the URI standards. It's hoped that in the future most tools will under‐
stand all of these formats and will always accept underscores for spaces in nodenames. In
both GNOME and KDE, if the form without the nodename is used the nodename is assumed to be
"Top". Examples of the GNOME format are <info:gcc> and <info:gcc#G++_and_GCC>. Examples of
the KDE format are <info:(gcc)> and <info:(gcc)G++ and GCC>.

whatis - Documentation search

whatis:string

This scheme searches the database of short (one-line) descriptions of commands and returns a
list of descriptions containing that string. Only complete word matches are returned. See
whatis(1). This URI scheme is unique to UNIX-like systems (such as Linux) and is not cur‐
rently registered by the IETF.

ghelp - GNOME help documentation

ghelp:name-of-application

This loads GNOME help for the given application. Note that not much documentation currently
exists in this format.

ldap - Lightweight Directory Access Protocol

ldap://hostport
ldap://hostport/
ldap://hostport/dn
ldap://hostport/dn?attributes
ldap://hostport/dn?attributes?scope
ldap://hostport/dn?attributes?scope?filter
ldap://hostport/dn?attributes?scope?filter?extensions

This scheme supports queries to the Lightweight Directory Access Protocol (LDAP), a protocol
for querying a set of servers for hierarchically organized information (such as people and
computing resources). See RFC 2255 ⟨http://www.ietf.org/rfc/rfc2255.txt⟩ for more informa‐
tion on the LDAP URL scheme. The components of this URL are:

hostport the LDAP server to query, written as a hostname optionally followed by a colon
and the port number. The default LDAP port is TCP port 389. If empty, the
client determines which the LDAP server to use.

dn the LDAP Distinguished Name, which identifies the base object of the LDAP search
(see RFC 2253 ⟨http://www.ietf.org/rfc/rfc2253.txt⟩ section 3).

attributes a comma-separated list of attributes to be returned; see RFC 2251 section 4.1.5.
If omitted, all attributes should be returned.

scope specifies the scope of the search, which can be one of "base" (for a base object
search), "one" (for a one-level search), or "sub" (for a subtree search). If
scope is omitted, "base" is assumed.

filter specifies the search filter (subset of entries to return). If omitted, all en‐
tries should be returned. See RFC 2254 ⟨http://www.ietf.org/rfc/rfc2254.txt⟩
section 4.

extensions a comma-separated list of type=value pairs, where the =value portion may be omit‐
ted for options not requiring it. An extension prefixed with a '!' is critical
(must be supported to be valid), otherwise it is noncritical (optional).

LDAP queries are easiest to explain by example. Here's a query that asks ldap.itd.umich.edu
for information about the University of Michigan in the U.S.:

ldap://ldap.itd.umich.edu/o=University%20of%20Michigan,c=US

To just get its postal address attribute, request:

ldap://ldap.itd.umich.edu/o=University%20of%20Michigan,c=US?postalAddress

To ask a host.com at port 6666 for information about the person with common name (cn) "Babs
Jensen" at University of Michigan, request:

ldap://host.com:6666/o=University%20of%20Michigan,c=US??sub?(cn=Babs%20Jensen)

wais - Wide Area Information Servers

wais://hostport/database
wais://hostport/database?search
wais://hostport/database/wtype/wpath

This scheme designates a WAIS database, search, or document (see IETF RFC 1625
⟨http://www.ietf.org/rfc/rfc1625.txt⟩ for more information on WAIS). Hostport is the host‐
name, optionally followed by a colon and port number (the default port number is 210).

The first form designates a WAIS database for searching. The second form designates a par‐
ticular search of the WAIS database database. The third form designates a particular docu‐
ment within a WAIS database to be retrieved. wtype is the WAIS designation of the type of
the object and wpath is the WAIS document-id.

other schemes

There are many other URI schemes. Most tools that accept URIs support a set of internal URIs
(e.g., Mozilla has the about: scheme for internal information, and the GNOME help browser has
the toc: scheme for various starting locations). There are many schemes that have been de‐
fined but are not as widely used at the current time (e.g., prospero). The nntp: scheme is
deprecated in favor of the news: scheme. URNs are to be supported by the urn: scheme, with a
hierarchical name space (e.g., urn:ietf:... would identify IETF documents); at this time URNs
are not widely implemented. Not all tools support all schemes.

Character encoding
URIs use a limited number of characters so that they can be typed in and used in a variety of
situations.

The following characters are reserved, that is, they may appear in a URI but their use is
limited to their reserved purpose (conflicting data must be escaped before forming the URI):

; / ? : @ & = + $ ,

Unreserved characters may be included in a URI. Unreserved characters include uppercase and
lowercase English letters, decimal digits, and the following limited set of punctuation marks
and symbols:

- _ . ! ~ * ' ( )

All other characters must be escaped. An escaped octet is encoded as a character triplet,
consisting of the percent character "%" followed by the two hexadecimal digits representing
the octet code (you can use uppercase or lowercase letters for the hexadecimal digits). For
example, a blank space must be escaped as "%20", a tab character as "%09", and the "&" as
"%26". Because the percent "%" character always has the reserved purpose of being the escape
indicator, it must be escaped as "%25". It is common practice to escape space characters as
the plus symbol (+) in query text; this practice isn't uniformly defined in the relevant RFCs
(which recommend %20 instead) but any tool accepting URIs with query text should be prepared
for them. A URI is always shown in its "escaped" form.

Unreserved characters can be escaped without changing the semantics of the URI, but this
should not be done unless the URI is being used in a context that does not allow the un‐
escaped character to appear. For example, "%7e" is sometimes used instead of "~" in an HTTP
URL path, but the two are equivalent for an HTTP URL.

For URIs which must handle characters outside the US ASCII character set, the HTML 4.01 spec‐
ification (section B.2) and IETF RFC 2718 (section 2.2.5) recommend the following approach:

1. translate the character sequences into UTF-8 (IETF RFC 2279)—see utf-8(7)—and then

2. use the URI escaping mechanism, that is, use the %HH encoding for unsafe octets.

Writing a URI
When written, URIs should be placed inside double quotes (e.g., "http://www.kernel.org"), en‐
closed in angle brackets (e.g., <http://lwn.net>), or placed on a line by themselves. A
warning for those who use double-quotes: never move extraneous punctuation (such as the pe‐
riod ending a sentence or the comma in a list) inside a URI, since this will change the value
of the URI. Instead, use angle brackets instead, or switch to a quoting system that never
includes extraneous characters inside quotation marks. This latter system, called the 'new'
or 'logical' quoting system by "Hart's Rules" and the "Oxford Dictionary for Writers and Edi‐
tors", is preferred practice in Great Britain and hackers worldwide (see the Jargon File's
section on Hacker Writing Style, ⟨http://www.fwi.uva.nl/~mes/jargon/h
/HackerWritingStyle.html⟩, for more information). Older documents suggested inserting the
prefix "URL:" just before the URI, but this form has never caught on.

The URI syntax was designed to be unambiguous. However, as URIs have become commonplace,
traditional media (television, radio, newspapers, billboards, etc.) have increasingly used
abbreviated URI references consisting of only the authority and path portions of the identi‐
fied resource (e.g., <www.w3.org/Addressing>). Such references are primarily intended for
human interpretation rather than machine, with the assumption that context-based heuristics
are sufficient to complete the URI (e.g., hostnames beginning with "www" are likely to have a
URI prefix of "http://" and hostnames beginning with "ftp" likely to have a prefix of
"ftp://"). Many client implementations heuristically resolve these references. Such heuris‐
tics may change over time, particularly when new schemes are introduced. Since an abbrevi‐
ated URI has the same syntax as a relative URL path, abbreviated URI references cannot be
used where relative URIs are permitted, and can be used only when there is no defined base
(such as in dialog boxes). Don't use abbreviated URIs as hypertext links inside a document;
use the standard format as described here.

CONFORMING TO
(IETF RFC 2396) ⟨http://www.ietf.org/rfc/rfc2396.txt⟩, (HTML 4.0) ⟨http://www.w3.org/TR
/REC-html40⟩.

NOTES
Any tool accepting URIs (e.g., a web browser) on a Linux system should be able to handle (di‐
rectly or indirectly) all of the schemes described here, including the man: and info:
schemes. Handling them by invoking some other program is fine and in fact encouraged.

Technically the fragment isn't part of the URI.

For information on how to embed URIs (including URLs) in a data format, see documentation on
that format. HTML uses the format <A HREF="uri"> text </A>. Texinfo files use the format
@uref{uri}. Man and mdoc have the recently added UR macro, or just include the URI in the
text (viewers should be able to detect :// as part of a URI).

The GNOME and KDE desktop environments currently vary in the URIs they accept, in particular
in their respective help browsers. To list man pages, GNOME uses <toc:man> while KDE uses
<man:(index)>, and to list info pages, GNOME uses <toc:info> while KDE uses <info:(dir)> (the
author of this man page prefers the KDE approach here, though a more regular format would be
even better). In general, KDE uses <file:/cgi-bin/> as a prefix to a set of generated files.
KDE prefers documentation in HTML, accessed via the <file:/cgi-bin/helpindex>. GNOME prefers
the ghelp scheme to store and find documentation. Neither browser handles file: references
to directories at the time of this writing, making it difficult to refer to an entire direc‐
tory with a browsable URI. As noted above, these environments differ in how they handle the
info: scheme, probably the most important variation. It is expected that GNOME and KDE will
converge to common URI formats, and a future version of this man page will describe the con‐
verged result. Efforts to aid this convergence are encouraged.

Security
A URI does not in itself pose a security threat. There is no general guarantee that a URL,
which at one time located a given resource, will continue to do so. Nor is there any guaran‐
tee that a URL will not locate a different resource at some later point in time; such a guar‐
antee can be obtained only from the person(s) controlling that namespace and the resource in
question.

It is sometimes possible to construct a URL such that an attempt to perform a seemingly harm‐
less operation, such as the retrieval of an entity associated with the resource, will in fact
cause a possibly damaging remote operation to occur. The unsafe URL is typically constructed
by specifying a port number other than that reserved for the network protocol in question.
The client unwittingly contacts a site that is in fact running a different protocol. The
content of the URL contains instructions that, when interpreted according to this other pro‐
tocol, cause an unexpected operation. An example has been the use of a gopher URL to cause
an unintended or impersonating message to be sent via a SMTP server.

Caution should be used when using any URL that specifies a port number other than the default
for the protocol, especially when it is a number within the reserved space.

Care should be taken when a URI contains escaped delimiters for a given protocol (for exam‐
ple, CR and LF characters for telnet protocols) that these are not unescaped before transmis‐
sion. This might violate the protocol, but avoids the potential for such characters to be
used to simulate an extra operation or parameter in that protocol, which might lead to an un‐
expected and possibly harmful remote operation to be performed.

It is clearly unwise to use a URI that contains a password which is intended to be secret.
In particular, the use of a password within the "userinfo" component of a URI is strongly
recommended against except in those rare cases where the "password" parameter is intended to
be public.

BUGS
Documentation may be placed in a variety of locations, so there currently isn't a good URI
scheme for general online documentation in arbitrary formats. References of the form
<file:///usr/doc/ZZZ> don't work because different distributions and local installation re‐
quirements may place the files in different directories (it may be in /usr/doc, or /usr/lo‐
cal/doc, or /usr/share, or somewhere else). Also, the directory ZZZ usually changes when a
version changes (though filename globbing could partially overcome this). Finally, using the
file: scheme doesn't easily support people who dynamically load documentation from the Inter‐
net (instead of loading the files onto a local filesystem). A future URI scheme may be added
(e.g., "userdoc:") to permit programs to include cross-references to more detailed documenta‐
tion without having to know the exact location of that documentation. Alternatively, a fu‐
ture version of the filesystem specification may specify file locations sufficiently so that
the file: scheme will be able to locate documentation.

Many programs and file formats don't include a way to incorporate or implement links using
URIs.

Many programs can't handle all of these different URI formats; there should be a standard
mechanism to load an arbitrary URI that automatically detects the users' environment (e.g.,
text or graphics, desktop environment, local user preferences, and currently executing tools)
and invokes the right tool for any URI.

SEE ALSO
lynx(1), man2html(1), mailaddr(7), utf-8(7)

IETF RFC 2255 ⟨http://www.ietf.org/rfc/rfc2255.txt⟩

COLOPHON
This page is part of release 5.10 of the Linux man-pages project. A description of the
project, information about reporting bugs, and the latest version of this page, can be found
at https://www.kernel.org/doc/man-pages/.

Linux 2020-08-13 URI(7)