send(2) - phpMan

Command: man perldoc info search(apropos)  


Mail (1)             - send and receive mail
agentxtrap (1)       - send an AgentX NotifyPDU to an AgentX master agent
arping (8)           - sends arp and/or ip pings to a given host
bsd-mailx (1)        - send and receive mail
btrfs-receive (8)    - receive subvolumes from send stream
btrfs-send (8)       - generate a stream of changes between two subvolume sna...
dbus-send (1)        - Send a message to a message bus
fping (8)            - send ICMP ECHO_REQUEST packets to network hosts
ftpmail (1)          - FIFO-based Perl script for sending email based on prof...
git-imap-send (1)    - Send a collection of patches from stdin to an IMAP folder
git-send-pack (1)    - Push objects over Git protocol to another repository
git-upload-archive (1) - Send archive back to git-archive
git-upload-pack (1)  - Send objects packed back to git-fetch-pack
ipmievd (8)          - IPMI event daemon for sending events to syslog
jcmd (1)             - Sends diagnostic command requests to a running Java Vi...
kill (1)             - send a signal to a process
killall5 (8)         - send a signal to all processes.
Log::Any::Adapter (3pm) - Tell Log::Any where to send its logs
Log::Any::Adapter::Syslog (3pm) - Send Log::Any logs to syslog
Log::Dispatch::Email (3pm) - Base class for objects that send log messages vi...
Log::Dispatch::Email::MailSend (3pm) - Subclass of Log::Dispatch::Email that ...
Log::Dispatch::Email::MailSender (3pm) - Subclass of Log::Dispatch::Email tha...
Log::Dispatch::Email::MailSendmail (3pm) - Subclass of Log::Dispatch::Email t...
mail (1)             - send and receive mail
Mail::Mailer (3pm)   - send simple emails
Mail::Send (3pm)     - Simple electronic mail interface
Mail::Sender (3pm)   - module for sending mails with attachments through an S...
Mail::Sendmail (3pm) - Simple platform independent mailer
Mail::Transport::Send (3pm) - send a message
Mail::Transport::Sendmail (3pm) - transmit messages using external Sendmail p...
mailq (1)            - Postfix to Sendmail compatibility interface
mailx (1)            - send and receive mail
mhmail (1mh)         - send or read mail non-interactively with nmh
mpath_persistent_reserve_in (3) - send PRIN command to DM device
mpath_persistent_reserve_out (3) - send PROUT command to DM device
mtr-packet (8)       - send and receive network probes
newaliases (1)       - Postfix to Sendmail compatibility interface
out123 (1)           - send raw PCM audio or a waveform pattern to an output ...
pam_syslog (3)       - send messages to the system logger
pam_vsyslog (3)      - send messages to the system logger
ping (8)             - send ICMP ECHO_REQUEST to network hosts
ping4 (8)            - send ICMP ECHO_REQUEST to network hosts
ping6 (8)            - send ICMP ECHO_REQUEST to network hosts
plymouth (1)         - Send commands to plymouthd
rpc.sm-notify (8)    - send reboot notifications to NFS peers
send (1mh)           - send an nmh message
sendfiles (1mh)      - send multiple files by MIME message with nmh
sendmail (1)         - Postfix to Sendmail compatibility interface
setlogcons (8)       - Send kernel messages to console N
sg3_utils (8)        - a package of utilities for sending SCSI commands
sg_bg_ctl (8)        - send SCSI BACKGROUND CONTROL command
sg_compare_and_write (8) - send the SCSI COMPARE AND WRITE command
sg_copy_results (8)  - send SCSI RECEIVE COPY RESULTS command (XCOPY related)
sg_get_config (8)    - send SCSI GET CONFIGURATION command (MMC-4 +)
sg_get_elem_status (8) - send SCSI GET PHYSICAL ELEMENT STATUS command
sg_get_lba_status (8) - send SCSI GET LBA STATUS(16 or 32) command
sg_ident (8)         - send SCSI REPORT/SET IDENTIFYING INFORMATION command
sg_luns (8)          - send SCSI REPORT LUNS command or decode given LUN
sg_prevent (8)       - send SCSI PREVENT ALLOW MEDIUM REMOVAL command
sg_raw (8)           - send arbitrary SCSI or NVMe command to a device
sg_read_attr (8)     - send SCSI READ ATTRIBUTE command
sg_read_block_limits (8) - send SCSI READ BLOCK LIMITS command
sg_read_buffer (8)   - send SCSI READ BUFFER command
sg_read_long (8)     - send a SCSI READ LONG command
sg_readcap (8)       - send SCSI READ CAPACITY command
sg_reassign (8)      - send SCSI REASSIGN BLOCKS command
sg_referrals (8)     - send SCSI REPORT REFERRALS command
sg_rep_pip (8)       - send SCSI REPORT PROVISIONING INITIALIZATION PATTERN c...
sg_rep_zones (8)     - send SCSI REPORT ZONES command
sg_requests (8)      - send one or more SCSI REQUEST SENSE commands
sg_reset (8)         - sends SCSI device, target, bus or host reset; or check...
sg_reset_wp (8)      - send SCSI RESET WRITE POINTER command
sg_rmsn (8)          - send SCSI READ MEDIA SERIAL NUMBER command
sg_rtpg (8)          - send SCSI REPORT TARGET PORT GROUPS command
sg_sat_identify (8)  - send ATA IDENTIFY DEVICE command via SCSI to ATA Trans...
sg_seek (8)          - send SCSI SEEK, PRE-FETCH(10) or PRE-FETCH(16) command
sg_senddiag (8)      - performs a SCSI SEND DIAGNOSTIC command
sg_ses_microcode (8) - send microcode to a SCSI enclosure
sg_start (8)         - send SCSI START STOP UNIT command: start, stop, load o...
sg_stpg (8)          - send SCSI SET TARGET PORT GROUPS command
sg_stream_ctl (8)    - send SCSI STREAM CONTROL or GET STREAM STATUS command
sg_sync (8)          - send SCSI SYNCHRONIZE CACHE command
sg_turs (8)          - send one or more SCSI TEST UNIT READY commands
sg_unmap (8)         - send SCSI UNMAP command (known as 'trim' in ATA specs)
sg_write_buffer (8)  - send SCSI WRITE BUFFER commands
sg_write_long (8)    - send SCSI WRITE LONG command
sg_write_same (8)    - send SCSI WRITE SAME command
sg_write_verify (8)  - send the SCSI WRITE AND VERIFY command
sg_zone (8)          - send a SCSI ZONE modifying command
skill (1)            - send a signal or report process status
sm-notify (8)        - send reboot notifications to NFS peers
snice (1)            - send a signal or report process status
snmpinform (1)       - sends an SNMP notification to a manager
snmptrap (1)         - sends an SNMP notification to a manager
sudo_sendlog (8)     - send sudo I/O log to log server
rpc_soc (3t)         - "library routines for remote procedure calls"
write (1)            - send a message to another user
write.ul (1)         - send a message to another user
xdg-email (1)        - command line tool for sending mail using the user's pr...
zabbix_sender (1)    - Zabbix sender utility

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-12-09 01:25 @18.97.14.82 CrawledBy CCBot/2.0 (https://commoncrawl.org/faq/)
Valid XHTML 1.0!Valid CSS!