On Apache
Under GNU General Public License
2024-04-20 00:58 @18.218.129.100 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Test2::API(3perl) Perl Programmers Reference Guide Test2::API(3perl)
NAME
Test2::API - Primary interface for writing Test2 based testing tools.
***INTERNALS NOTE***
The internals of this package are subject to change at any time! The public methods
provided will not change in backwards-incompatible ways (once there is a stable release),
but the underlying implementation details might. Do not break encapsulation here!
Currently the implementation is to create a single instance of the Test2::API::Instance
Object. All class methods defer to the single instance. There is no public access to the
singleton, and that is intentional. The class methods provided by this package provide
the only functionality publicly exposed.
This is done primarily to avoid the problems Test::Builder had by exposing its singleton.
We do not want anyone to replace this singleton, rebless it, or directly muck with its
internals. If you need to do something and cannot because of the restrictions placed here,
then please report it as an issue. If possible, we will create a way for you to implement
your functionality without exposing things that should not be exposed.
DESCRIPTION
This package exports all the functions necessary to write and/or verify testing tools.
Using these building blocks you can begin writing test tools very quickly. You are also
provided with tools that help you to test the tools you write.
SYNOPSIS
WRITING A TOOL
The "context()" method is your primary interface into the Test2 framework.
package My::Ok;
use Test2::API qw/context/;
our @EXPORT = qw/my_ok/;
use base 'Exporter';
# Just like ok() from Test::More
sub my_ok($;$) {
my ($bool, $name) = @_;
my $ctx = context(); # Get a context
$ctx->ok($bool, $name);
$ctx->release; # Release the context
return $bool;
}
See Test2::API::Context for a list of methods available on the context object.
TESTING YOUR TOOLS
The "intercept { ... }" tool lets you temporarily intercept all events generated by the
test system:
use Test2::API qw/intercept/;
use My::Ok qw/my_ok/;
my $events = intercept {
# These events are not displayed
my_ok(1, "pass");
my_ok(0, "fail");
};
my_ok(@$events == 2, "got 2 events, the pass and the fail");
my_ok($events->[0]->pass, "first event passed");
my_ok(!$events->[1]->pass, "second event failed");
DEEP EVENT INTERCEPTION
Normally "intercept { ... }" only intercepts events sent to the main hub (as added by
intercept itself). Nested hubs, such as those created by subtests, will not be
intercepted. This is normally what you will still see the nested events by inspecting the
subtest event. However there are times where you want to verify each event as it is sent,
in that case use "intercept_deep { ... }".
my $events = intercept_Deep {
buffered_subtest foo => sub {
ok(1, "pass");
};
};
$events in this case will contain 3 items:
The event from "ok(1, "pass")"
The plan event for the subtest
The subtest event itself, with the first 2 events nested inside it as children.
This lets you see the order in which the events were sent, unlike "intercept { ... }"
which only lets you see events as the main hub sees them.
OTHER API FUNCTIONS
use Test2::API qw{
test2_init_done
test2_stack
test2_set_is_end
test2_get_is_end
test2_ipc
test2_formatter_set
test2_formatter
};
my $init = test2_init_done();
my $stack = test2_stack();
my $ipc = test2_ipc();
test2_formatter_set($FORMATTER)
my $formatter = test2_formatter();
... And others ...
MAIN API EXPORTS
All exports are optional. You must specify subs to import.
use Test2::API qw/context intercept run_subtest/;
This is the list of exports that are most commonly needed. If you are simply writing a
tool, then this is probably all you need. If you need something and you cannot find it
here, then you can also look at "OTHER API EXPORTS".
These exports lack the 'test2_' prefix because of how important/common they are. Exports
in the "OTHER API EXPORTS" section have the 'test2_' prefix to ensure they stand out.
context(...)
Usage:
$ctx = context()
$ctx = context(%params)
The "context()" function will always return the current context. If there is already a
context active, it will be returned. If there is not an active context, one will be
generated. When a context is generated it will default to using the file and line number
where the currently running sub was called from.
Please see "CRITICAL DETAILS" in Test2::API::Context for important rules about what you
can and cannot do with a context once it is obtained.
Note This function will throw an exception if you ignore the context object it returns.
Note On perls 5.14+ a depth check is used to insure there are no context leaks. This
cannot be safely done on older perls due to
<https://rt.perl.org/Public/Bug/Display.html?id=127774> You can forcefully enable it
either by setting "$ENV{T2_CHECK_DEPTH} = 1" or "$Test2::API::DO_DEPTH_CHECK = 1" BEFORE
loading Test2::API.
OPTIONAL PARAMETERS
All parameters to "context" are optional.
level => $int
If you must obtain a context in a sub deeper than your entry point you can use this to
tell it how many EXTRA stack frames to look back. If this option is not provided the
default of 0 is used.
sub third_party_tool {
my $sub = shift;
... # Does not obtain a context
$sub->();
...
}
third_party_tool(sub {
my $ctx = context(level => 1);
...
$ctx->release;
});
wrapped => $int
Use this if you need to write your own tool that wraps a call to "context()" with the
intent that it should return a context object.
sub my_context {
my %params = ( wrapped => 0, @_ );
$params{wrapped}++;
my $ctx = context(%params);
...
return $ctx;
}
sub my_tool {
my $ctx = my_context();
...
$ctx->release;
}
If you do not do this, then tools you call that also check for a context will notice
that the context they grabbed was created at the same stack depth, which will trigger
protective measures that warn you and destroy the existing context.
stack => $stack
Normally "context()" looks at the global hub stack. If you are maintaining your own
Test2::API::Stack instance you may pass it in to be used instead of the global one.
hub => $hub
Use this parameter if you want to obtain the context for a specific hub instead of
whatever one happens to be at the top of the stack.
on_init => sub { ... }
This lets you provide a callback sub that will be called ONLY if your call to
"context()" generated a new context. The callback WILL NOT be called if "context()" is
returning an existing context. The only argument passed into the callback will be the
context object itself.
sub foo {
my $ctx = context(on_init => sub { 'will run' });
my $inner = sub {
# This callback is not run since we are getting the existing
# context from our parent sub.
my $ctx = context(on_init => sub { 'will NOT run' });
$ctx->release;
}
$inner->();
$ctx->release;
}
on_release => sub { ... }
This lets you provide a callback sub that will be called when the context instance is
released. This callback will be added to the returned context even if an existing
context is returned. If multiple calls to context add callbacks, then all will be
called in reverse order when the context is finally released.
sub foo {
my $ctx = context(on_release => sub { 'will run second' });
my $inner = sub {
my $ctx = context(on_release => sub { 'will run first' });
# Neither callback runs on this release
$ctx->release;
}
$inner->();
# Both callbacks run here.
$ctx->release;
}
release($;$)
Usage:
release $ctx;
release $ctx, ...;
This is intended as a shortcut that lets you release your context and return a value in
one statement. This function will get your context, and an optional return value. It will
release your context, then return your value. Scalar context is always assumed.
sub tool {
my $ctx = context();
...
return release $ctx, 1;
}
This tool is most useful when you want to return the value you get from calling a function
that needs to see the current context:
my $ctx = context();
my $out = some_tool(...);
$ctx->release;
return $out;
We can combine the last 3 lines of the above like so:
my $ctx = context();
release $ctx, some_tool(...);
context_do(&;@)
Usage:
sub my_tool {
context_do {
my $ctx = shift;
my (@args) = @_;
$ctx->ok(1, "pass");
...
# No need to call $ctx->release, done for you on scope exit.
} @_;
}
Using this inside your test tool takes care of a lot of boilerplate for you. It will
ensure a context is acquired. It will capture and rethrow any exception. It will insure
the context is released when you are done. It preserves the subroutine call context
(array, scalar, void).
This is the safest way to write a test tool. The only two downsides to this are a slight
performance decrease, and some extra indentation in your source. If the indentation is a
problem for you then you can take a peek at the next section.
no_context(&;$)
Usage:
no_context { ... };
no_context { ... } $hid;
sub my_tool(&) {
my $code = shift;
my $ctx = context();
...
no_context {
# Things in here will not see our current context, they get a new
# one.
$code->();
};
...
$ctx->release;
};
This tool will hide a context for the provided block of code. This means any tools run
inside the block will get a completely new context if they acquire one. The new context
will be inherited by tools nested below the one that acquired it.
This will normally hide the current context for the top hub. If you need to hide the
context for a different hub you can pass in the optional $hid parameter.
intercept(&)
Usage:
my $events = intercept {
ok(1, "pass");
ok(0, "fail");
...
};
This function takes a codeblock as its only argument, and it has a prototype. It will
execute the codeblock, intercepting any generated events in the process. It will return an
array reference with all the generated event objects. All events should be subclasses of
Test2::Event.
This is a very low-level subtest tool. This is useful for writing tools which produce
subtests. This is not intended for people simply writing tests.
run_subtest(...)
Usage:
run_subtest($NAME, \&CODE, $BUFFERED, @ARGS)
# or
run_subtest($NAME, \&CODE, \%PARAMS, @ARGS)
This will run the provided codeblock with the args in @args. This codeblock will be run as
a subtest. A subtest is an isolated test state that is condensed into a single
Test2::Event::Subtest event, which contains all events generated inside the subtest.
ARGUMENTS:
$NAME
The name of the subtest.
\&CODE
The code to run inside the subtest.
$BUFFERED or \%PARAMS
If this is a simple scalar then it will be treated as a boolean for the 'buffered'
setting. If this is a hash reference then it will be used as a parameters hash. The
param hash will be used for hub construction (with the specified keys removed).
Keys that are removed and used by run_subtest:
'buffered' => $bool
Toggle buffered status.
'inherit_trace' => $bool
Normally the subtest hub is pushed and the sub is allowed to generate its own root
context for the hub. When this setting is turned on a root context will be created
for the hub that shares the same trace as the current context.
Set this to true if your tool is producing subtests without user-specified subs.
'no_fork' => $bool
Defaults to off. Normally forking inside a subtest will actually fork the subtest,
resulting in 2 final subtest events. This parameter will turn off that behavior,
only the original process/thread will return a final subtest event.
@ARGS
Any extra arguments you want passed into the subtest code.
BUFFERED VS UNBUFFERED (OR STREAMED)
Normally all events inside and outside a subtest are sent to the formatter immediately by
the hub. Sometimes it is desirable to hold off sending events within a subtest until the
subtest is complete. This usually depends on the formatter being used.
Things not effected by this flag
In both cases events are generated and stored in an array. This array is eventually
used to populate the "subevents" attribute on the Test2::Event::Subtest event that is
generated at the end of the subtest. This flag has no effect on this part, it always
happens.
At the end of the subtest, the final Test2::Event::Subtest event is sent to the
formatter.
Things that are effected by this flag
The "buffered" attribute of the Test2::Event::Subtest event will be set to the value
of this flag. This means any formatter, listener, etc which looks at the event will
know if it was buffered.
Things that are formatter dependant
Events within a buffered subtest may or may not be sent to the formatter as they
happen. If a formatter fails to specify then the default is to NOT SEND the events as
they are generated, instead the formatter can pull them from the "subevents"
attribute.
A formatter can specify by implementing the "hide_buffered()" method. If this method
returns true then events generated inside a buffered subtest will not be sent
independently of the final subtest event.
An example of how this is used is the Test2::Formatter::TAP formatter. For unbuffered
subtests the events are rendered as they are generated. At the end of the subtest, the
final subtest event is rendered, but the "subevents" attribute is ignored. For buffered
subtests the opposite occurs, the events are NOT rendered as they are generated, instead
the "subevents" attribute is used to render them all at once. This is useful when running
subtests tests in parallel, since without it the output from subtests would be interleaved
together.
OTHER API EXPORTS
Exports in this section are not commonly needed. These all have the 'test2_' prefix to
help ensure they stand out. You should look at the "MAIN API EXPORTS" section before
looking here. This section is one where "Great power comes with great responsibility". It
is possible to break things badly if you are not careful with these.
All exports are optional. You need to list which ones you want at import time:
use Test2::API qw/test2_init_done .../;
STATUS AND INITIALIZATION STATE
These provide access to internal state and object instances.
$bool = test2_init_done()
This will return true if the stack and IPC instances have already been initialized. It
will return false if they have not. Init happens as late as possible. It happens as
soon as a tool requests the IPC instance, the formatter, or the stack.
$bool = test2_load_done()
This will simply return the boolean value of the loaded flag. If Test2 has finished
loading this will be true, otherwise false. Loading is considered complete the first
time a tool requests a context.
test2_set_is_end()
test2_set_is_end($bool)
This is used to toggle Test2's belief that the END phase has already started. With no
arguments this will set it to true. With arguments it will set it to the first
argument's value.
This is used to prevent the use of "caller()" in END blocks which can cause segfaults.
This is only necessary in some persistent environments that may have multiple END
phases.
$bool = test2_get_is_end()
Check if Test2 believes it is the END phase.
$stack = test2_stack()
This will return the global Test2::API::Stack instance. If this has not yet been
initialized it will be initialized now.
test2_ipc_disable
Disable IPC.
$bool = test2_ipc_diabled
Check if IPC is disabled.
test2_ipc_wait_enable()
test2_ipc_wait_disable()
$bool = test2_ipc_wait_enabled()
These can be used to turn IPC waiting on and off, or check the current value of the
flag.
Waiting is turned on by default. Waiting will cause the parent process/thread to wait
until all child processes and threads are finished before exiting. You will almost
never want to turn this off.
$bool = test2_no_wait()
test2_no_wait($bool)
DISCOURAGED: This is a confusing interface, it is better to use
"test2_ipc_wait_enable()", "test2_ipc_wait_disable()" and "test2_ipc_wait_enabled()".
This can be used to get/set the no_wait status. Waiting is turned on by default.
Waiting will cause the parent process/thread to wait until all child processes and
threads are finished before exiting. You will almost never want to turn this off.
$fh = test2_stdout()
$fh = test2_stderr()
These functions return the filehandles that test output should be written to. They
are primarily useful when writing a custom formatter and code that turns events into
actual output (TAP, etc.). They will return a dupe of the original filehandles that
formatted output can be sent to regardless of whatever state the currently running
test may have left STDOUT and STDERR in.
test2_reset_io()
Re-dupe the internal filehandles returned by "test2_stdout()" and "test2_stderr()"
from the current STDOUT and STDERR. You shouldn't need to do this except in very
peculiar situations (for example, you're testing a new formatter and you need control
over where the formatter is sending its output.)
BEHAVIOR HOOKS
These are hooks that allow you to add custom behavior to actions taken by Test2 and tools
built on top of it.
test2_add_callback_exit(sub { ... })
This can be used to add a callback that is called after all testing is done. This is
too late to add additional results, the main use of this callback is to set the exit
code.
test2_add_callback_exit(
sub {
my ($context, $exit, \$new_exit) = @_;
...
}
);
The $context passed in will be an instance of Test2::API::Context. The $exit argument
will be the original exit code before anything modified it. $$new_exit is a reference
to the new exit code. You may modify this to change the exit code. Please note that
$$new_exit may already be different from $exit
test2_add_callback_post_load(sub { ... })
Add a callback that will be called when Test2 is finished loading. This means the
callback will be run once, the first time a context is obtained. If Test2 has already
finished loading then the callback will be run immediately.
test2_add_callback_testing_done(sub { ... })
This adds your coderef as a follow-up to the root hub after Test2 is finished loading.
This is essentially a helper to do the following:
test2_add_callback_post_load(sub {
my $stack = test2_stack();
$stack->top; # Insure we have a hub
my ($hub) = Test2::API::test2_stack->all;
$hub->set_active(1);
$hub->follow_up(sub { ... }); # <-- Your coderef here
});
test2_add_callback_context_acquire(sub { ... })
Add a callback that will be called every time someone tries to acquire a context. This
will be called on EVERY call to "context()". It gets a single argument, a reference to
the hash of parameters being used the construct the context. This is your chance to
change the parameters by directly altering the hash.
test2_add_callback_context_acquire(sub {
my $params = shift;
$params->{level}++;
});
This is a very scary API function. Please do not use this unless you need to. This is
here for Test::Builder and backwards compatibility. This has you directly manipulate
the hash instead of returning a new one for performance reasons.
test2_add_callback_context_init(sub { ... })
Add a callback that will be called every time a new context is created. The callback
will receive the newly created context as its only argument.
test2_add_callback_context_release(sub { ... })
Add a callback that will be called every time a context is released. The callback will
receive the released context as its only argument.
test2_add_callback_pre_subtest(sub { ... })
Add a callback that will be called every time a subtest is going to be run. The
callback will receive the subtest name, coderef, and any arguments.
@list = test2_list_context_acquire_callbacks()
Return all the context acquire callback references.
@list = test2_list_context_init_callbacks()
Returns all the context init callback references.
@list = test2_list_context_release_callbacks()
Returns all the context release callback references.
@list = test2_list_exit_callbacks()
Returns all the exit callback references.
@list = test2_list_post_load_callbacks()
Returns all the post load callback references.
@list = test2_list_pre_subtest_callbacks()
Returns all the pre-subtest callback references.
test2_add_uuid_via(sub { ... })
$sub = test2_add_uuid_via()
This allows you to provide a UUID generator. If provided UUIDs will be attached to all
events, hubs, and contexts. This is useful for storing, tracking, and linking these
objects.
The sub you provide should always return a unique identifier. Most things will expect
a proper UUID string, however nothing in Test2::API enforces this.
The sub will receive exactly 1 argument, the type of thing being tagged 'context',
'hub', or 'event'. In the future additional things may be tagged, in which case new
strings will be passed in. These are purely informative, you can (and usually should)
ignore them.
IPC AND CONCURRENCY
These let you access, or specify, the IPC system internals.
$bool = test2_has_ipc()
Check if IPC is enabled.
$ipc = test2_ipc()
This will return the global Test2::IPC::Driver instance. If this has not yet been
initialized it will be initialized now.
test2_ipc_add_driver($DRIVER)
Add an IPC driver to the list. This will add the driver to the start of the list.
@drivers = test2_ipc_drivers()
Get the list of IPC drivers.
$bool = test2_ipc_polling()
Check if polling is enabled.
test2_ipc_enable_polling()
Turn on polling. This will cull events from other processes and threads every time a
context is created.
test2_ipc_disable_polling()
Turn off IPC polling.
test2_ipc_enable_shm()
Legacy, this is currently a no-op that returns 0;
test2_ipc_set_pending($uniq_val)
Tell other processes and events that an event is pending. $uniq_val should be a unique
value no other thread/process will generate.
Note: After calling this "test2_ipc_get_pending()" will return 1. This is intentional,
and not avoidable.
$pending = test2_ipc_get_pending()
This returns -1 if there is no way to check (assume yes)
This returns 0 if there are (most likely) no pending events.
This returns 1 if there are (likely) pending events. Upon return it will reset,
nothing else will be able to see that there were pending events.
$timeout = test2_ipc_get_timeout()
test2_ipc_set_timeout($timeout)
Get/Set the timeout value for the IPC system. This timeout is how long the IPC system
will wait for child processes and threads to finish before aborting.
The default value is 30 seconds.
MANAGING FORMATTERS
These let you access, or specify, the formatters that can/should be used.
$formatter = test2_formatter
This will return the global formatter class. This is not an instance. By default the
formatter is set to Test2::Formatter::TAP.
You can override this default using the "T2_FORMATTER" environment variable.
Normally 'Test2::Formatter::' is prefixed to the value in the environment variable:
$ T2_FORMATTER='TAP' perl test.t # Use the Test2::Formatter::TAP formatter
$ T2_FORMATTER='Foo' perl test.t # Use the Test2::Formatter::Foo formatter
If you want to specify a full module name you use the '+' prefix:
$ T2_FORMATTER='+Foo::Bar' perl test.t # Use the Foo::Bar formatter
test2_formatter_set($class_or_instance)
Set the global formatter class. This can only be set once. Note: This will override
anything specified in the 'T2_FORMATTER' environment variable.
@formatters = test2_formatters()
Get a list of all loaded formatters.
test2_formatter_add($class_or_instance)
Add a formatter to the list. Last formatter added is used at initialization. If this
is called after initialization a warning will be issued.
OTHER EXAMPLES
See the "/Examples/" directory included in this distribution.
SEE ALSO
Test2::API::Context - Detailed documentation of the context object.
Test2::IPC - The IPC system used for threading/fork support.
Test2::Formatter - Formatters such as TAP live here.
Test2::Event - Events live in this namespace.
Test2::Hub - All events eventually funnel through a hub. Custom hubs are how "intercept()"
and "run_subtest()" are implemented.
MAGIC
This package has an END block. This END block is responsible for setting the exit code
based on the test results. This end block also calls the callbacks that can be added to
this package.
SOURCE
The source code repository for Test2 can be found at
http://github.com/Test-More/test-more/.
MAINTAINERS
Chad Granum <exodist AT cpan.org>
AUTHORS
Chad Granum <exodist AT cpan.org>
COPYRIGHT
Copyright 2019 Chad Granum <exodist AT cpan.org>.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
See http://dev.perl.org/licenses/
perl v5.30.0 2023-11-23 Test2::API(3perl)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-20 00:58 @18.218.129.100 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)