Mail::Box::Parser(3pm) - phpMan

Command: man perldoc info search(apropos)  


Mail::Box::Parser(3pm)         User Contributed Perl Documentation         Mail::Box::Parser(3pm)

NAME
       Mail::Box::Parser - reading and writing messages

INHERITANCE
        Mail::Box::Parser
          is a Mail::Reporter

        Mail::Box::Parser is extended by
          Mail::Box::Parser::C
          Mail::Box::Parser::Perl

SYNOPSIS
        # Not instatiatiated itself

DESCRIPTION
       The "Mail::Box::Parser" manages the parsing of folders.  Usually, you won't need to know
       anything about this module, except the options which are involved with this code.

       There are two implementations of this module planned:

       o   Mail::Box::Parser::Perl

           A slower parser which only uses plain Perl.  This module is a bit slower, and does
           less checking and less recovery.

       o   Mail::Box::Parser::C

           A fast parser written in "C".  This package is released as separate module on CPAN,
           because the module distribution via CPAN can not handle XS files which are not located
           in the root directory of the module tree.  If a C compiler is available on your
           system, it will be used automatically.

       Extends "DESCRIPTION" in Mail::Reporter.

METHODS
       Extends "METHODS" in Mail::Reporter.

   Constructors
       Extends "Constructors" in Mail::Reporter.

       Mail::Box::Parser->new(%options)
           Create a parser object which can handle one file.  For mbox-like mailboxes, this
           object can be used to read a whole folder.  In case of MH-like mailboxes, each message
           is contained in a single file, so each message has its own parser object.

            -Option  --Defined in     --Default
             file                       undef
             filename                   <required>
             log       Mail::Reporter   'WARNINGS'
             mode                       'r'
             trace     Mail::Reporter   'WARNINGS'

           file => FILE-HANDLE
             Any "IO::File" or "GLOB" which can be used to read the data from.  In case this
             option is specified, the "filename" is informational only.

           filename => FILENAME
             The name of the file to be read.

           log => LEVEL
           mode => OPENMODE
             File-open mode, which defaults to 'r', which means `read-only'.  See "perldoc -f
             open" for possible modes.  Only applicable when no "file" is specified.

           trace => LEVEL

   The parser
       $obj->fileChanged()
           Returns whether the file which is parsed has changed after the last time
           takeFileInfo() was called.

       $obj->filename()
           Returns the name of the file this parser is working on.

       $obj->restart()
           Restart the parser on a certain file, usually because the content has changed.

       $obj->start(%options)
           Start the parser by opening a file.

            -Option--Default
             file    undef

           file => FILEHANDLE|undef
             The file is already open, for instance because the data must be read from STDIN.

       $obj->stop()
           Stop the parser, which will include a close of the file.  The lock on the folder will
           not be removed (is not the responsibility of the parser).

   Parsing
       $obj->bodyAsFile( $fh [$chars, [$lines]] )
           Try to read one message-body from the file, and immediately write it to the specified
           file-handle.  Optionally, the predicted number of CHARacterS and/or $lines to be read
           can be supplied.  These values may be "undef" and may be wrong.

           The return is a list of three scalars: the location of the body (begin and end) and
           the number of lines in the body.

       $obj->bodyAsList( [$chars, [$lines]] )
           Try to read one message-body from the file.  Optionally, the predicted number of
           CHARacterS and/or $lines to be read can be supplied.  These values may be "undef" and
           may be wrong.

           The return is a list of scalars, each containing one line (including line terminator),
           preceded by two integers representing the location in the file where this body started
           and ended.

       $obj->bodyAsString( [$chars, [$lines]] )
           Try to read one message-body from the file.  Optionally, the predicted number of
           CHARacterS and/or $lines to be read can be supplied.  These values may be "undef" and
           may be wrong.

           The return is a list of three scalars, the location in the file where the body starts,
           where the body ends, and the string containing the whole body.

       $obj->bodyDelayed( [$chars, [$lines]] )
           Try to read one message-body from the file, but the data is skipped.  Optionally, the
           predicted number of CHARacterS and/or $lines to be skipped can be supplied.  These
           values may be "undef" and may be wrong.

           The return is a list of four scalars: the location of the body (begin and end), the
           size of the body, and the number of lines in the body.  The number of lines may be
           "undef".

       $obj->filePosition( [$position] )
           Returns the location of the next byte to be used in the file which is parsed.  When a
           $position is specified, the location in the file is moved to the indicated spot first.

       $obj->lineSeparator()
           Returns the character or characters which are used to separate lines in the folder
           file.  This is based on the first line of the file.  UNIX systems use a single LF to
           separate lines.  Windows uses a CR and a LF.  Mac uses CR.

       $obj->popSeparator()
           Remove the last-pushed separator from the list which is maintained by the parser.
           This will return "undef" when there is none left.

       $obj->pushSeparator(STRING|Regexp)
           Add a boundary line.  Separators tell the parser where to stop reading.  A famous
           separator is the "From"-line, which is used in Mbox-like folders to separate messages.
           But also parts (attachments) is a message are divided by separators.

           The specified STRING describes the start of the separator-line.  The Regexp can
           specify a more complicated format.

       $obj->readHeader()
           Read the whole message-header and return it as list of field-value pairs.  Mind that
           some fields will appear more than once.

           The first element will represent the position in the file where the header starts.
           The follows the list of header field names and bodies.

           example:

            my ($where, @header) = $parser->readHeader;

       $obj->readSeparator(%options)
           Read the currently active separator (the last one which was pushed).  The line (or
           "undef") is returned.  Blank-lines before the separator lines are ignored.

           The return are two scalars, where the first gives the location of the separator in the
           file, and the second the line which is found as separator.  A new separator is
           activated using pushSeparator().

   Internals
       $obj->closeFile()
           Close the file which was being parsed.

       $obj->defaultParserType( [$class] )
       Mail::Box::Parser->defaultParserType( [$class] )
           Returns the parser to be used to parse all subsequent messages, possibly first setting
           the parser using the optional argument.  Usually, the parser is autodetected; the
           "C"-based parser will be used when it can be, and the Perl-based parser will be used
           otherwise.

           The $class argument allows you to specify a package name to force a particular parser
           to be used (such as your own custom parser). You have to "use" or "require" the
           package yourself before calling this method with an argument. The parser must be a
           sub-class of "Mail::Box::Parser".

       $obj->openFile($args)
           Open the file to be parsed.  $args is a ref-hash of options.

            -Option  --Default
             filename  <required>
             mode      <required>

           filename => FILENAME
           mode => STRING
       $obj->takeFileInfo()
           Capture some data about the file being parsed, to be compared later.

   Error handling
       Extends "Error handling" in Mail::Reporter.

       $obj->AUTOLOAD()
           Inherited, see "Error handling" in Mail::Reporter

       $obj->addReport($object)
           Inherited, see "Error handling" in Mail::Reporter

       $obj->defaultTrace( [$level]|[$loglevel, $tracelevel]|[$level, $callback] )
       Mail::Box::Parser->defaultTrace( [$level]|[$loglevel, $tracelevel]|[$level, $callback] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->errors()
           Inherited, see "Error handling" in Mail::Reporter

       $obj->log( [$level, [$strings]] )
       Mail::Box::Parser->log( [$level, [$strings]] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->logPriority($level)
       Mail::Box::Parser->logPriority($level)
           Inherited, see "Error handling" in Mail::Reporter

       $obj->logSettings()
           Inherited, see "Error handling" in Mail::Reporter

       $obj->notImplemented()
           Inherited, see "Error handling" in Mail::Reporter

       $obj->report( [$level] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->reportAll( [$level] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->trace( [$level] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->warnings()
           Inherited, see "Error handling" in Mail::Reporter

   Cleanup
       Extends "Cleanup" in Mail::Reporter.

       $obj->DESTROY()
           Inherited, see "Cleanup" in Mail::Reporter

DIAGNOSTICS
       Warning: File $filename changed during access.
           When a message parser starts working, it takes size and modification time of the file
           at hand.  If the folder is written, it checks whether there were changes in the file
           made by external programs.

           Calling Mail::Box::update() on a folder before it being closed will read these new
           messages.  But the real source of this problem is locking: some external program (for
           instance the mail transfer agent, like sendmail) uses a different locking mechanism as
           you do and therefore violates your rights.

       Error: Filename or handle required to create a parser.
           A message parser needs to know the source of the message at creation.  These sources
           can be a filename (string), file handle object or GLOB.  See new(filename) and
           new(file).

       Error: Package $package does not implement $method.
           Fatal error: the specific package (or one of its superclasses) does not implement this
           method where it should. This message means that some other related classes do
           implement this method however the class at hand does not.  Probably you should
           investigate this and probably inform the author of the package.

SEE ALSO
       This module is part of Mail-Message distribution version 3.012, built on February 11,
       2022. Website: http://perl.overmeer.net/CPAN/

LICENSE
       Copyrights 2001-2022 by [Mark Overmeer <markov AT cpan.org>]. For other contributors see
       ChangeLog.

       This program is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.  See http://dev.perl.org/licenses/

perl v5.34.0                                2022-02-14                     Mail::Box::Parser(3pm)

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-10-12 18:07 @3.239.3.196 CrawledBy CCBot/2.0 (https://commoncrawl.org/faq/)
Valid XHTML 1.0!Valid CSS!