On Apache
Under GNU General Public License
2024-05-15 17:18 @3.16.137.108 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
MAN-PAGES(7) Linux Programmer's Manual MAN-PAGES(7)
NAME
man-pages - conventions for writing Linux man pages
SYNOPSIS
man [section] title
DESCRIPTION
This page describes the conventions that should be employed when writing man pages for the
Linux man-pages project, which documents the user-space API provided by the Linux kernel
and the GNU C library. The project thus provides most of the pages in Section 2, many of
the pages that appear in Sections 3, 4, and 7, and a few of the pages that appear in Sec-
tions 1, 5, and 8 of the man pages on a Linux system. The conventions described on this
page may also be useful for authors writing man pages for other projects.
Sections of the manual pages
The manual Sections are traditionally defined as follows:
1 User commands (Programs)
Those commands that can be executed by the user from within a shell.
2 System calls
Those functions which wrap operations performed by the kernel.
3 Library calls
All library functions excluding the system call wrappers (Most of the libc func-
tions).
4 Special files (devices)
Files found in /dev which allow to access to devices through the kernel.
5 File formats and configuration files
Describes various human-readable file formats and configuration files.
6 Games Games and funny little programs available on the system.
7 Overview, conventions, and miscellaneous
Overviews or descriptions of various topics, conventions and protocols, charac-
ter set standards, the standard filesystem layout, and miscellaneous other
things.
8 System management commands
Commands like mount(8), many of which only root can execute.
Macro package
New manual pages should be marked up using the groff an.tmac package described in man(7).
This choice is mainly for consistency: the vast majority of existing Linux manual pages
are marked up using these macros.
Conventions for source file layout
Please limit source code line length to no more than about 75 characters wherever possi-
ble. This helps avoid line-wrapping in some mail clients when patches are submitted in-
line.
Title line
The first command in a man page should be a TH command:
.TH title section date source manual
where:
title The title of the man page, written in all caps (e.g., MAN-PAGES).
section The section number in which the man page should be placed (e.g., 7).
date The date of the last nontrivial change that was made to the man page.
(Within the man-pages project, the necessary updates to these timestamps
are handled automatically by scripts, so there is no need to manually up-
date them as part of a patch.) Dates should be written in the form YYYY-
MM-DD.
source The source of the command, function, or system call.
For those few man-pages pages in Sections 1 and 8, probably you just want
to write GNU.
For system calls, just write Linux. (An earlier practice was to write
the version number of the kernel from which the manual page was being
written/checked. However, this was never done consistently, and so was
probably worse than including no version number. Henceforth, avoid in-
cluding a version number.)
For library calls that are part of glibc or one of the other common GNU
libraries, just use GNU C Library, GNU, or an empty string.
For Section 4 pages, use Linux.
In cases of doubt, just write Linux, or GNU.
manual The title of the manual (e.g., for Section 2 and 3 pages in the man-pages
package, use Linux Programmer's Manual).
Sections within a manual page
The list below shows conventional or suggested sections. Most manual pages should include
at least the highlighted sections. Arrange a new manual page so that sections are placed
in the order shown in the list.
NAME
SYNOPSIS
CONFIGURATION [Normally only in Section 4]
DESCRIPTION
OPTIONS [Normally only in Sections 1, 8]
EXIT STATUS [Normally only in Sections 1, 8]
RETURN VALUE [Normally only in Sections 2, 3]
ERRORS [Typically only in Sections 2, 3]
ENVIRONMENT
FILES
VERSIONS [Normally only in Sections 2, 3]
ATTRIBUTES [Normally only in Sections 2, 3]
CONFORMING TO
NOTES
BUGS
EXAMPLE
SEE ALSO
Where a traditional heading would apply, please use it; this kind of consistency can make
the information easier to understand. If you must, you can create your own headings if
they make things easier to understand (this can be especially useful for pages in Sections
4 and 5). However, before doing this, consider whether you could use the traditional
headings, with some subsections (.SS) within those sections.
The following list elaborates on the contents of each of the above sections.
NAME The name of this manual page.
See man(7) for important details of the line(s) that should follow the .SH
NAME command. All words in this line (including the word immediately fol-
lowing the "\-") should be in lowercase, except where English or technical
terminological convention dictates otherwise.
SYNOPSIS A brief summary of the command or function's interface.
For commands, this shows the syntax of the command and its arguments (in-
cluding options); boldface is used for as-is text and italics are used to
indicate replaceable arguments. Brackets ([]) surround optional arguments,
vertical bars (|) separate choices, and ellipses (...) can be repeated. For
functions, it shows any required data declarations or #include directives,
followed by the function declaration.
Where a feature test macro must be defined in order to obtain the declara-
tion of a function (or a variable) from a header file, then the SYNOPSIS
should indicate this, as described in feature_test_macros(7).
CONFIGURATION Configuration details for a device.
This section normally appears only in Section 4 pages.
DESCRIPTION An explanation of what the program, function, or format does.
Discuss how it interacts with files and standard input, and what it produces
on standard output or standard error. Omit internals and implementation de-
tails unless they're critical for understanding the interface. Describe the
usual case; for information on command-line options of a program use the OP-
TIONS section.
When describing new behavior or new flags for a system call or library func-
tion, be careful to note the kernel or C library version that introduced the
change. The preferred method of noting this information for flags is as
part of a .TP list, in the following form (here, for a new system call
flag):
XYZ_FLAG (since Linux 3.7)
Description of flag...
Including version information is especially useful to users who are con-
strained to using older kernel or C library versions (which is typical in
embedded systems, for example).
OPTIONS A description of the command-line options accepted by a program and how they
change its behavior.
This section should appear only for Section 1 and 8 manual pages.
EXIT STATUS A list of the possible exit status values of a program and the conditions
that cause these values to be returned.
This section should appear only for Section 1 and 8 manual pages.
RETURN VALUE For Section 2 and 3 pages, this section gives a list of the values the li-
brary routine will return to the caller and the conditions that cause these
values to be returned.
ERRORS For Section 2 and 3 manual pages, this is a list of the values that may be
placed in errno in the event of an error, along with information about the
cause of the errors.
Where several different conditions produce the same error, the preferred ap-
proach is to create separate list entries (with duplicate error names) for
each of the conditions. This makes the separate conditions clear, may make
the list easier to read, and allows metainformation (e.g., kernel version
number where the condition first became applicable) to be more easily marked
for each condition.
The error list should be in alphabetical order.
ENVIRONMENT A list of all environment variables that affect the program or function and
how they affect it.
FILES A list of the files the program or function uses, such as configuration
files, startup files, and files the program directly operates on.
Give the full pathname of these files, and use the installation process to
modify the directory part to match user preferences. For many programs, the
default installation location is in /usr/local, so your base manual page
should use /usr/local as the base.
ATTRIBUTES A summary of various attributes of the function(s) documented on this page.
See attributes(7) for further details.
VERSIONS A brief summary of the Linux kernel or glibc versions where a system call or
library function appeared, or changed significantly in its operation.
As a general rule, every new interface should include a VERSIONS section in
its manual page. Unfortunately, many existing manual pages don't include
this information (since there was no policy to do so when they were writ-
ten). Patches to remedy this are welcome, but, from the perspective of pro-
grammers writing new code, this information probably matters only in the
case of kernel interfaces that have been added in Linux 2.4 or later (i.e.,
changes since kernel 2.2), and library functions that have been added to
glibc since version 2.1 (i.e., changes since glibc 2.0).
The syscalls(2) manual page also provides information about kernel versions
in which various system calls first appeared.
CONFORMING TO A description of any standards or conventions that relate to the function or
command described by the manual page.
The preferred terms to use for the various standards are listed as headings
in standards(7).
For a page in Section 2 or 3, this section should note the POSIX.1 ver-
sion(s) that the call conforms to, and also whether the call is specified in
C99. (Don't worry too much about other standards like SUS, SUSv2, and XPG,
or the SVr4 and 4.xBSD implementation standards, unless the call was speci-
fied in those standards, but isn't in the current version of POSIX.1.)
If the call is not governed by any standards but commonly exists on other
systems, note them. If the call is Linux-specific, note this.
If this section consists of just a list of standards (which it commonly
does), terminate the list with a period ('.').
NOTES Miscellaneous notes.
For Section 2 and 3 man pages you may find it useful to include subsections
(SS) named Linux Notes and Glibc Notes.
In Section 2, use the heading C library/kernel differences to mark off notes
that describe the differences (if any) between the C library wrapper func-
tion for a system call and the raw system call interface provided by the
kernel.
BUGS A list of limitations, known defects or inconveniences, and other question-
able activities.
EXAMPLE One or more examples demonstrating how this function, file or command is
used.
For details on writing example programs, see Example programs below.
AUTHORS A list of authors of the documentation or program.
Use of an AUTHORS section is strongly discouraged. Generally, it is better
not to clutter every page with a list of (over time potentially numerous)
authors; if you write or significantly amend a page, add a copyright notice
as a comment in the source file. If you are the author of a device driver
and want to include an address for reporting bugs, place this under the BUGS
section.
SEE ALSO A comma-separated list of related man pages, possibly followed by other re-
lated pages or documents.
The list should be ordered by section number and then alphabetically by
name. Do not terminate this list with a period.
Where the SEE ALSO list contains many long manual page names, to improve the
visual result of the output, it may be useful to employ the .ad l (don't
right justify) and .nh (don't hyphenate) directives. Hyphenation of indi-
vidual page names can be prevented by preceding words with the string "\%".
Given the distributed, autonomous nature of FOSS projects and their documen-
tation, it is sometimes necessary--and in many cases desirable--that the SEE
ALSO section includes references to manual pages provided by other projects.
STYLE GUIDE
The following subsections describe the preferred style for the man-pages project. For de-
tails not covered below, the Chicago Manual of Style is usually a good source; try also
grepping for preexisting usage in the project source tree.
Use of gender-neutral language
As far as possible, use gender-neutral language in the text of man pages. Use of "they"
("them", "themself", "their") as a gender-neutral singular pronoun is acceptable.
Formatting conventions for manual pages describing commands
For manual pages that describe a command (typically in Sections 1 and 8), the arguments
are always specified using italics, even in the SYNOPSIS section.
The name of the command, and its options, should always be formatted in bold.
Formatting conventions for manual pages describing functions
For manual pages that describe functions (typically in Sections 2 and 3), the arguments
are always specified using italics, even in the SYNOPSIS section, where the rest of the
function is specified in bold:
int myfunction(int argc, char **argv);
Variable names should, like argument names, be specified in italics.
Any reference to the subject of the current manual page should be written with the name in
bold followed by a pair of parentheses in Roman (normal) font. For example, in the fc-
ntl(2) man page, references to the subject of the page would be written as: fcntl(). The
preferred way to write this in the source file is:
.BR fcntl ()
(Using this format, rather than the use of "\fB...\fP()" makes it easier to write tools
that parse man page source files.)
Use semantic newlines
In the source of a manual page, new sentences should be started on new lines, and long
sentences should split into lines at clause breaks (commas, semicolons, colons, and so
on). This convention, sometimes known as "semantic newlines", makes it easier to see the
effect of patches, which often operate at the level of individual sentences or sentence
clauses.
Formatting conventions (general)
Paragraphs should be separated by suitable markers (usually either .PP or .IP). Do not
separate paragraphs using blank lines, as this results in poor rendering in some output
formats (such as PostScript and PDF).
Filenames (whether pathnames, or references to header files) are always in italics (e.g.,
<stdio.h>), except in the SYNOPSIS section, where included files are in bold (e.g., #in-
clude <stdio.h>). When referring to a standard header file include, specify the header
file surrounded by angle brackets, in the usual C way (e.g., <stdio.h>).
Special macros, which are usually in uppercase, are in bold (e.g., MAXINT). Exception:
don't boldface NULL.
When enumerating a list of error codes, the codes are in bold (this list usually uses the
.TP macro).
Complete commands should, if long, be written as an indented line on their own, with a
blank line before and after the command, for example
man 7 man-pages
If the command is short, then it can be included inline in the text, in italic format, for
example, man 7 man-pages. In this case, it may be worth using nonbreaking spaces ("\ ")
at suitable places in the command. Command options should be written in italics (e.g.,
-l).
Expressions, if not written on a separate indented line, should be specified in italics.
Again, the use of nonbreaking spaces may be appropriate if the expression is inlined with
normal text.
When showing example shell sessions, user input should be formatted in bold, for example
$ date
Thu Jul 7 13:01:27 CEST 2016
Any reference to another man page should be written with the name in bold, always followed
by the section number, formatted in Roman (normal) font, without any separating spaces
(e.g., intro(2)). The preferred way to write this in the source file is:
.BR intro (2)
(Including the section number in cross references lets tools like man2html(1) create prop-
erly hyperlinked pages.)
Control characters should be written in bold face, with no quotes; for example, ^X.
Spelling
Starting with release 2.59, man-pages follows American spelling conventions (previously,
there was a random mix of British and American spellings); please write all new pages and
patches according to these conventions.
Aside from the well-known spelling differences, there are a few other subtleties to watch
for:
* American English tends to use the forms "backward", "upward", "toward", and so on
rather than the British forms "backwards", "upwards", "towards", and so on.
BSD version numbers
The classical scheme for writing BSD version numbers is x.yBSD, where x.y is the version
number (e.g., 4.2BSD). Avoid forms such as BSD 4.3.
Capitalization
In subsection ("SS") headings, capitalize the first word in the heading, but otherwise use
lowercase, except where English usage (e.g., proper nouns) or programming language re-
quirements (e.g., identifier names) dictate otherwise. For example:
.SS Unicode under Linux
Indentation of structure definitions, shell session logs, and so on
When structure definitions, shell session logs, and so on are included in running text,
indent them by 4 spaces (i.e., a block enclosed by .in +4n and .in), format them using the
.EX and EE macros, and surround them with suitable paragraph markers (either .PP or .IP).
For example:
.PP
.in +4n
.EX
int
main(int argc, char *argv[])
{
return 0;
}
.EE
.in
.PP
Preferred terms
The following table lists some preferred terms to use in man pages, mainly to ensure con-
sistency across pages.
Term Avoid using Notes
-------------------------------------------------------------------------
bit mask bitmask
built-in builtin
Epoch epoch For the UNIX Epoch
(00:00:00, 1 Jan 1970
UTC)
filename file name
filesystem file system
hostname host name
inode i-node
lowercase lower case, lower-case
nonzero non-zero
pathname path name
pseudoterminal pseudo-terminal
privileged port reserved port, system
port
real-time realtime, real time
run time runtime
saved set-group-ID saved group ID, saved
set-GID
saved set-user-ID saved user ID, saved
set-UID
set-group-ID set-GID, setgid
set-user-ID set-UID, setuid
superuser super user, super-user
superblock super block, super-block
timestamp time stamp
timezone time zone
uppercase upper case, upper-case
usable useable
user space userspace
username user name
x86-64 x86_64 Except if referring to
result of "uname -m" or
similar
zeros zeroes
See also the discussion Hyphenation of attributive compounds below.
Terms to avoid
The following table lists some terms to avoid using in man pages, along with some sug-
gested alternatives, mainly to ensure consistency across pages.
Avoid Use instead Notes
-------------------------------------------------------------------
32bit 32-bit same for 8-bit, 16-bit,
etc.
current process calling process A common mistake made by
kernel programmers when
writing man pages
manpage man page, manual page
minus infinity negative infinity
non-root unprivileged user
non-superuser unprivileged user
nonprivileged unprivileged
OS operating system
plus infinity positive infinity
pty pseudoterminal
tty terminal
Unices UNIX systems
Unixes UNIX systems
Trademarks
Use the correct spelling and case for trademarks. The following is a list of the correct
spellings of various relevant trademarks that are sometimes misspelled:
DG/UX
HP-UX
UNIX
UnixWare
NULL, NUL, null pointer, and null character
A null pointer is a pointer that points to nothing, and is normally indicated by the con-
stant NULL. On the other hand, NUL is the null byte, a byte with the value 0, represented
in C via the character constant '\0'.
The preferred term for the pointer is "null pointer" or simply "NULL"; avoid writing "NULL
pointer".
The preferred term for the byte is "null byte". Avoid writing "NUL", since it is too eas-
ily confused with "NULL". Avoid also the terms "zero byte" and "null character". The
byte that terminates a C string should be described as "the terminating null byte";
strings may be described as "null-terminated", but avoid the use of "NUL-terminated".
Hyperlinks
For hyperlinks, use the .UR/.UE macro pair (see groff_man(7)). This produces proper hy-
perlinks that can be used in a web browser, when rendering a page with, say:
BROWSER=firefox man -H pagename
Use of e.g., i.e., etc., a.k.a., and similar
In general, the use of abbreviations such as "e.g.", "i.e.", "etc.", "cf.", and "a.k.a."
should be avoided, in favor of suitable full wordings ("for example", "that is", "compare
to", "and so on", "also known as").
The only place where such abbreviations may be acceptable is in short parenthetical asides
(e.g., like this one).
Always include periods in such abbreviations, as shown here. In addition, "e.g." and
"i.e." should always be followed by a comma.
Em-dashes
The way to write an em-dash--the glyph that appears at either end of this subphrase--in
*roff is with the macro "\(em". (On an ASCII terminal, an em-dash typically renders as
two hyphens, but in other typographical contexts it renders as a long dash.) Em-dashes
should be written without surrounding spaces.
Hyphenation of attributive compounds
Compound terms should be hyphenated when used attributively (i.e., to qualify a following
noun). Some examples:
32-bit value
command-line argument
floating-point number
run-time check
user-space function
wide-character string
Hyphenation with multi, non, pre, re, sub, and so on
The general tendency in modern English is not to hyphenate after prefixes such as "multi",
"non", "pre", "re", "sub", and so on. Manual pages should generally follow this rule when
these prefixes are used in natural English constructions with simple suffixes. The fol-
lowing list gives some examples of the preferred forms:
interprocess
multithreaded
multiprocess
nonblocking
nondefault
nonempty
noninteractive
nonnegative
nonportable
nonzero
preallocated
precreate
prerecorded
reestablished
reinitialize
rearm
reread
subcomponent
subdirectory
subsystem
Hyphens should be retained when the prefixes are used in nonstandard English words, with
trademarks, proper nouns, acronyms, or compound terms. Some examples:
non-ASCII
non-English
non-NULL
non-real-time
Finally, note that "re-create" and "recreate" are two different verbs, and the former is
probably what you want.
Real minus character
Where a real minus character is required (e.g., for numbers such as -1, for man page cross
references such as utf-8(7), or when writing options that have a leading dash, such as in
ls -l), use the following form in the man page source:
\-
This guideline applies also to code examples.
Character constants
To produce single quotes that render well in both ASCII and UTF-8, use the following form
for character constants in the man page source:
\(aqC\(aq
where C is the quoted character. This guideline applies also to character constants used
in code examples.
Example programs and shell sessions
Manual pages may include example programs demonstrating how to use a system call or li-
brary function. However, note the following:
* Example programs should be written in C.
* An example program is necessary and useful only if it demonstrates something beyond
what can easily be provided in a textual description of the interface. An example pro-
gram that does nothing other than call an interface usually serves little purpose.
* Example programs should be fairly short (preferably less than 100 lines; ideally less
than 50 lines).
* Example programs should do error checking after system calls and library function
calls.
* Example programs should be complete, and compile without warnings when compiled with
cc -Wall.
* Where possible and appropriate, example programs should allow experimentation, by vary-
ing their behavior based on inputs (ideally from command-line arguments, or alterna-
tively, via input read by the program).
* Example programs should be laid out according to Kernighan and Ritchie style, with
4-space indents. (Avoid the use of TAB characters in source code!) The following com-
mand can be used to format your source code to something close to the preferred style:
indent -npro -kr -i4 -ts4 -sob -l72 -ss -nut -psl prog.c
* For consistency, all example programs should terminate using either of:
exit(EXIT_SUCCESS);
exit(EXIT_FAILURE);
Avoid using the following forms to terminate a program:
exit(0);
exit(1);
return n;
* If there is extensive explanatory text before the program source code, mark off the
source code with a subsection heading Program source, as in:
.SS Program source
Always do this if the explanatory text includes a shell session log.
If you include a shell session log demonstrating the use of a program or other system fea-
ture:
* Place the session log above the source code listing
* Indent the session log by four spaces.
* Boldface the user input text, to distinguish it from output produced by the system.
For some examples of what example programs should look like, see wait(2) and pipe(2).
EXAMPLE
For canonical examples of how man pages in the man-pages package should look, see pipe(2)
and fcntl(2).
SEE ALSO
man(1), man2html(1), attributes(7), groff(7), groff_man(7), man(7), mdoc(7)
COLOPHON
This page is part of release 5.05 of the Linux man-pages project. A description of the
project, information about reporting bugs, and the latest version of this page, can be
found at https://www.kernel.org/doc/man-pages/.
Linux 2019-10-10 MAN-PAGES(7)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-05-15 17:18 @3.16.137.108 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)