phpman > perldoc > GD::Simple(3pm)

NAME
    GD::Simple - Simplified interface to GD library

SYNOPSIS
    For a nice tutorial on using this module, see Gabor Szabo's article at
    http://perlmaven.com/drawing-images-using-gd-simple.

        use GD::Simple;

        # create a new image
        $img = GD::Simple->new(400,250);

        # draw a red rectangle with blue borders
        $img->bgcolor('red');
        $img->fgcolor('blue');
        $img->rectangle(10,10,50,50);

        # draw an empty rectangle with green borders
        $img->bgcolor(undef);
        $img->fgcolor('green');
        $img->rectangle(30,30,100,100);

        # move to (80,80) and draw a green line to (100,190)
        $img->moveTo(80,80);
        $img->lineTo(100,190);

        # draw a solid orange ellipse
        $img->moveTo(110,100);
        $img->bgcolor('orange');
        $img->fgcolor('orange');
        $img->ellipse(40,40);

        # draw a black filled arc
        $img->moveTo(150,150);
        $img->fgcolor('black');
        $img->arc(50,50,0,100,gdNoFill|gdEdged);

        # draw a string at (10,180) using the default
        # built-in font
        $img->moveTo(10,180);
        $img->string('This is very simple');

        # draw a string at (280,210) using 20 point
        # times italic, angled upward 90 degrees
        $img->moveTo(280,210);
        $img->font('Times:italic');
        $img->fontsize(20);
        $img->angle(-90);
        $img->string('This is very fancy');

        # some turtle graphics
        $img->moveTo(300,100);
        $img->penSize(3,3);
        $img->angle(0);
        $img->line(20);   # 20 pixels going to the right
        $img->turn(30);   # set turning angle to 30 degrees
        $img->line(20);   # 20 pixel line
        $img->line(20);
        $img->line(20);
        $img->turn(-90); # set turning angle to -90 degrees
        $img->line(50);  # 50 pixel line

        # draw a cyan polygon edged in blue
        my $poly = GD::Polygon->new;
        $poly->addPt(150,100);
        $poly->addPt(199,199);
        $poly->addPt(100,199);
        $img->bgcolor('cyan');
        $img->fgcolor('blue');
        $img->penSize(1,1);
        $img->polygon($poly);

       # convert into png data
       print $img->png;

DESCRIPTION
    GD::Simple is a subclass of the GD library that shortens many of the long GD method calls by
    storing information about the pen color, size and position in the GD object itself. It also adds
    a small number of "turtle graphics" style calls for those who prefer to work in polar
    coordinates. In addition, the library allows you to use symbolic names for colors, such as
    "chartreuse", and will manage the colors for you.

  The Pen
    GD::Simple maintains a "pen" whose settings are used for line- and shape-drawing operations. The
    pen has the following properties:

    fgcolor
        The pen foreground color is the color of lines and the borders of filled and unfilled
        shapes.

    bgcolor
        The pen background color is the color of the contents of filled shapes.

    pensize
        The pen size is the width of the pen. Larger sizes draw thicker lines.

    position
        The pen position is its current position on the canvas in (X,Y) coordinates.

    angle
        When drawing in turtle mode, the pen angle determines the current direction of lines of
        relative length.

    turn
        When drawing in turtle mode, the turn determines the clockwise or counterclockwise angle
        that the pen will turn before drawing the next line.

    font
        The font to use when drawing text. Both built-in bitmapped fonts and TrueType fonts are
        supported.

    fontsize
        The size of the font to use when drawing with TrueType fonts.

    One sets the position and properties of the pen and then draws. As the drawing progresses, the
    position of the pen is updated.

  Methods
    GD::Simple introduces a number of new methods, a few of which have the same name as GD::Image
    methods, and hence change their behavior. In addition to these new methods, GD::Simple objects
    support all of the GD::Image methods. If you make a method call that isn't directly supported by
    GD::Simple, it refers the request to the underlying GD::Image object. Hence one can load a JPEG
    image into GD::Simple and declare it to be TrueColor by using this call, which is effectively
    inherited from GD::Image:

      my $img = GD::Simple->newFromJpeg('./myimage.jpg',1);

    The rest of this section describes GD::Simple-specific methods.

    $img = GD::Simple->new($x,$y [,$truecolor])
    $img = GD::Simple->new($gd)
        Create a new GD::Simple object. There are two forms of new(). In the first form, pass the
        width and height of the desired canvas, and optionally a boolean flag to request a truecolor
        image. In the second form, pass a previously-created GD::Image object.

    GD::Simple->class('GD');
    GD::Simple->class('GD::SVG');
        Select whether new() should use GD or GD::SVG internally. Call GD::Simple->class('GD::SVG')
        before calling new() if you wish to generate SVG images.

        If future GD subclasses are created, this method will subport them.

    $img->moveTo($x,$y)
        This call changes the position of the pen without drawing. It moves the pen to position
        ($x,$y) on the drawing canvas.

    $img->move($dx,$dy)
    $img->move($dr)
        This call changes the position of the pen without drawing. When called with two arguments it
        moves the pen $dx pixels to the right and $dy pixels downward. When called with one argument
        it moves the pen $dr pixels along the vector described by the current pen angle.

    $img->lineTo($x,$y)
        The lineTo() call simultaneously draws and moves the pen. It draws a line from the current
        pen position to the position defined by ($x,$y) using the current pen size and color. After
        drawing, the position of the pen is updated to the new position.

    $img->line($x1,$y1,$x2,$y2 [,$color])
    $img->line($dx,$dy)
    $img->line($dr)
        The line() call simultaneously draws and moves the pen. When called with two arguments it
        draws a line from the current position of the pen to the position $dx pixels to the right
        and $dy pixels down. When called with one argument, it draws a line $dr pixels long along
        the angle defined by the current pen angle.

        When called with four or five arguments, line() behaves like GD::Image->line().

    $img->clear
        This method clears the canvas by painting over it with the current background color.

    $img->rectangle($x1,$y1,$x2,$y2)
        This method draws the rectangle defined by corners ($x1,$y1), ($x2,$y2). The rectangle's
        edges are drawn in the foreground color and its contents are filled with the background
        color. To draw a solid rectangle set bgcolor equal to fgcolor. To draw an unfilled rectangle
        (transparent inside), set bgcolor to undef.

    $img->ellipse($width,$height)
        This method draws the ellipse centered at the current location with width $width and height
        $height. The ellipse's border is drawn in the foreground color and its contents are filled
        with the background color. To draw a solid ellipse set bgcolor equal to fgcolor. To draw an
        unfilled ellipse (transparent inside), set bgcolor to undef.

    $img->arc([$cx,$cy,] $width,$height,$start,$end [,$style])
        This method draws filled and unfilled arcs, at the current position, with the current fore-
        and background colors. See GD for a description of the arguments. To draw a solid arc (such
        as a pie wedge) set bgcolor equal to fgcolor. To draw an unfilled arc, set bgcolor to undef.

    $img->polygon($poly)
        This method draws filled and unfilled polygon using the current settings of fgcolor for the
        polygon border and bgcolor for the polygon fill color. See GD for a description of creating
        polygons. To draw a solid polygon set bgcolor equal to fgcolor. To draw an unfilled polygon,
        set bgcolor to undef.

    $img->polyline($poly)
        This method draws polygons without closing the first and last vertices (similar to
        GD::Image->unclosedPolygon()). It uses the fgcolor to draw the line.

    $img->string($string)
        This method draws the indicated string starting at the current position of the pen. The pen
        is moved to the end of the drawn string. Depending on the font selected with the font()
        method, this will use either a bitmapped GD font or a TrueType font. The angle of the pen
        will be consulted when drawing the text. For TrueType fonts, any angle is accepted. For GD
        bitmapped fonts, the angle can be either 0 (draw horizontal) or -90 (draw upwards).

        For consistency between the TrueType and GD font behavior, the string is always drawn so
        that the current position of the pen corresponds to the bottom left of the first character
        of the text. This is different from the GD behavior, in which the first character of
        bitmapped fonts hangs down from the pen point.

        This method returns a polygon indicating the bounding box of the rendered text. If an error
        occurred (such as invalid font specification) it returns undef and an error message in $@.

    $metrics = $img->fontMetrics
    ($metrics,$width,$height) = GD::Simple->fontMetrics($font,$fontsize,$string)
        This method returns information about the current font, most commonly a TrueType font. It
        can be invoked as an instance method (on a previously-created GD::Simple object) or as a
        class method (on the 'GD::Simple' class).

        When called as an instance method, fontMetrics() takes no arguments and returns a single
        hash reference containing the metrics that describe the currently selected font and size.
        The hash reference contains the following information:

          xheight      the base height of the font from the bottom to the top of
                       a lowercase 'm'

          ascent       the length of the upper stem of the lowercase 'd'

          descent      the length of the lower step of the lowercase 'j'

          lineheight   the distance from the bottom of the 'j' to the top of
                       the 'd'

          leading      the distance between two adjacent lines

        This description and code was changed with 2.75.

    ($delta_x,$delta_y)= $img->stringBounds($string)
        This method indicates the X and Y offsets (which may be negative) that will occur when the
        given string is drawn using the current font, fontsize and angle. When the string is drawn
        horizontally, it gives the width and height of the string's bounding box.

    $delta_x = $img->stringWidth($string)
        This method indicates the width of the string given the current font, fontsize and angle. It
        is the same as ($img->stringBounds($string))[0]

    ($x,$y) = $img->curPos
        Return the current position of the pen. Set the current position using moveTo().

    $font = $img->font([$newfont] [,$newsize])
        Get or set the current font. Fonts can be GD::Font objects, TrueType font file paths, or
        fontconfig font patterns like "Times:italic" (see fontconfig). The latter feature requires
        that you have the fontconfig library installed and are using libgd version 2.0.33 or higher.

        As a shortcut, you may pass two arguments to set the font and the fontsize simultaneously.
        The fontsize is only valid when drawing with TrueType fonts.

    $size = $img->fontsize([$newfontsize])
        Get or set the current font size. This is only valid for TrueType fonts.

    $size = $img->penSize([$newpensize])
        Get or set the current pen width for use during line drawing operations.

    $angle = $img->angle([$newangle])
        Set the current angle for use when calling line() or move() with a single argument.

        Here is an example of using turn() and angle() together to draw an octagon. The first line
        drawn is the downward-slanting top right edge. The last line drawn is the horizontal top of
        the octagon.

          $img->moveTo(200,50);
          $img->angle(0);
          $img->turn(360/8);
          for (1..8) { $img->line(50) }

    $angle = $img->turn([$newangle])
        Get or set the current angle to turn prior to drawing lines. This value is only used when
        calling line() or move() with a single argument. The turning angle will be applied to each
        call to line() or move() just before the actual drawing occurs.

        Angles are in degrees. Positive values turn the angle clockwise.

    $color = $img->fgcolor([$newcolor])
        Get or set the pen's foreground color. The current pen color can be set by (1) using an
        (r,g,b) triple; (2) using a previously-allocated color from the GD palette; or (3) by using
        a symbolic color name such as "chartreuse." The list of color names can be obtained using
        color_names(). The special color name 'transparent' will create a completely transparent
        color.

    $color = $img->bgcolor([$newcolor])
        Get or set the pen's background color. The current pen color can be set by (1) using an
        (r,g,b) triple; (2) using a previously-allocated color from the GD palette; or (3) by using
        a symbolic color name such as "chartreuse." The list of color names can be obtained using
        color_names(). The special color name 'transparent' will create a completely transparent
        color.

    $index = $img->translate_color(@args)
        Translates a color into a GD palette or TrueColor index. You may pass either an (r,g,b)
        triple or a symbolic color name. If you pass a previously-allocated index, the method will
        return it unchanged.

    $index = $img->alphaColor(@args,$alpha)
        Creates an alpha color. You may pass either an (r,g,b) triple or a symbolic color name,
        followed by an integer indicating its opacity. The opacity value ranges from 0 (fully
        opaque) to 127 (fully transparent).

    @names = GD::Simple->color_names
    $translate_table = GD::Simple->color_names
        Called in a list context, color_names() returns the list of symbolic color names recognized
        by this module. Called in a scalar context, the method returns a hash reference in which the
        keys are the color names and the values are array references containing [r,g,b] triples.

    $gd = $img->gd
        Return the internal GD::Image object. Usually you will not need to call this since all GD
        methods are automatically referred to this object.

    ($red,$green,$blue) = GD::Simple->HSVtoRGB($hue,$saturation,$value)
        Convert a Hue/Saturation/Value (HSV) color into an RGB triple. The hue, saturation and value
        are integers from 0 to 255.

    ($hue,$saturation,$value) = GD::Simple->RGBtoHSV($red,$green,$blue)
        Convert a Red/Green/Blue (RGB) value into a Hue/Saturation/Value (HSV) triple. The hue,
        saturation and value are integers from 0 to 255.

COLORS
    This script will create an image showing all the symbolic colors.

     #!/usr/bin/perl

     use strict;
     use GD::Simple;

     my @color_names = GD::Simple->color_names;
     my $cols = int(sqrt(@color_names));
     my $rows = int(@color_names/$cols)+1;

     my $cell_width    = 100;
     my $cell_height   = 50;
     my $legend_height = 16;
     my $width       = $cols * $cell_width;
     my $height      = $rows * $cell_height;

     my $img = GD::Simple->new($width,$height);
     $img->font(gdSmallFont);

     for (my $c=0; $c<$cols; $c++) {
       for (my $r=0; $r<$rows; $r++) {
         my $color = $color_names[$c*$rows + $r] or next;
         my @topleft  = ($c*$cell_width,$r*$cell_height);
         my @botright = ($topleft[0]+$cell_width,$topleft[1]+$cell_height-$legend_height);
         $img->bgcolor($color);
         $img->fgcolor($color);
         $img->rectangle(@topleft,@botright);
         $img->moveTo($topleft[0]+2,$botright[1]+$legend_height-2);
         $img->fgcolor('black');
         $img->string($color);
       }
     }

     print $img->png;

AUTHOR
    The GD::Simple module is copyright 2004, Lincoln D. Stein. It is distributed under the same
    terms as Perl itself. See the "Artistic License" in the Perl source code distribution for
    licensing terms.

    The latest versions of GD.pm are available at https://github.com/lstein/Perl-GD

SEE ALSO
    GD, GD::Polyline, GD::SVG, Image::Magick