# Email::MIME - phpMan ## NAME [Email::MIME] - easy MIME message handling ## VERSION version 1.952 ## SYNOPSIS Wait! Before you read this, maybe you just need [Email::Stuffer], which is a much easier-to-use tool for building simple email messages that might have attachments or both plain text and HTML. If that doesn't do it for you, then by all means keep reading. use [Email::MIME]; my $parsed = [Email::MIME]->new($message); my @parts = $parsed->parts; # These will be [Email::MIME] objects, too. my $decoded = $parsed->body; my $non_decoded = $parsed->body_raw; my $content_type = $parsed->content_type; ...or... use [Email::MIME]; use [IO::All]; # multipart message my @parts = ( [Email::MIME]->create( attributes => { filename => "report.pdf", content_type => "application/pdf", encoding => "quoted-printable", name => "2004-financials.pdf", }, body => io( "2004-financials.pdf" )->binary->all, ), [Email::MIME]->create( attributes => { content_type => "text/plain", disposition => "attachment", charset => "US-ASCII", }, body_str => "Hello there!", ), ); my $email = [Email::MIME]->create( header_str => [ From => '', To => [ '', 'Name <>' ], Cc => [Email::Address::XS]->new("Display Name \N{U+1F600}", ''), ], parts => [ @parts ], ); # nesting parts $email->parts_set( [ $email->parts, [Email::MIME]->create( parts => [ @parts ] ), ], ); # standard modifications $email->header_str_set( 'X-PoweredBy' => 'RT v3.0' ); $email->header_str_set( To => rcpts() ); $email->header_str_set( Cc => aux_rcpts() ); $email->header_str_set( Bcc => sekrit_rcpts() ); # more advanced $_->encoding_set( 'base64' ) for $email->parts; # Quick multipart creation my $email = [Email::MIME]->create( header_str => [ From => 'my@address', To => 'your@address', ], parts => [ q[This is part one], q[This is part two], q[These could be binary too], ], ); print $email->as_string; ## DESCRIPTION This is an extension of the [Email::Simple] module, to handle MIME encoded messages. It takes a message as a string, splits it up into its constituent parts, and allows you access to various parts of the message. Headers are decoded from MIME encoding. ## PERL VERSION This library should run on perls released even a long time ago. It should work on any version of perl released in the last five years. Although it may work on older versions of perl, no guarantee is made that the minimum required version will not be increased. The version may be increased for any reason, and there is no promise that patches will be accepted to lower the minimum required perl. ## METHODS Please see [Email::Simple] for the base set of methods. It won't take very long. Added to that, you have: create my $single = [Email::MIME]->create( header_str => [ ... ], body_str => '...', attributes => { ... }, ); my $multi = [Email::MIME]->create( header_str => [ ... ], parts => [ ... ], attributes => { ... }, ); This method creates a new MIME part. The "header_str" parameter is a list of headers pairs to include in the message. The value for each pair is expected to be a text string that will be MIME-encoded as needed. Alternatively it can be an object with "as_mime_string" method which implements conversion of that object to MIME-encoded string. That object method is called with two named input parameters: "charset" and "header_name_length". It should return MIME-encoded representation of the object. As of 2017-07-25, the header-value-as-object code is very young, and may yet change. In case header name is registered in %[Email::MIME::Header::header_to_class_map] hash then registered class is used for conversion from Unicode string to 8bit MIME encoding. Value can be either string or array reference to strings. Object is constructed via method "from_string" with string value (or values in case of array reference) and converted to MIME-encoded string via "as_mime_string" method. A similar "header" parameter can be provided in addition to or instead of "header_str". Its values will be used verbatim. "attributes" is a hash of MIME attributes to assign to the part, and may override portions of the header set in the "header" parameter. The hash keys correspond directly to methods for modifying a message from "[Email::MIME::Modifier]". The allowed keys are: content_type, charset, name, format, boundary, encoding, disposition, and filename. They will be mapped to "$attr\_set" for message modification. The "parts" parameter is a list reference containing "[Email::MIME]" objects. Elements of the "parts" list can also be a non-reference string of data. In that case, an "[Email::MIME]" object will be created for you. Simple checks will determine if the part is binary or not, and all parts created in this fashion are encoded with "base64", just in case. If "body" is given instead of "parts", it specifies the body to be used for a flat (subpart-less) MIME message. It is assumed to be a sequence of octets. If "body_str" is given instead of "body" or "parts", it is assumed to be a character string to be used as the body. If you provide a "body_str" parameter, you must provide "charset" and "encoding" attributes. content_type_set $email->content_type_set( 'text/html' ); Change the content type. All "Content-Type" header attributes will remain intact. charset_set name_set format_set boundary_set $email->charset_set( 'UTF-8' ); $email->name_set( 'some_filename.txt' ); $email->format_set( 'flowed' ); $email->boundary_set( undef ); # remove the boundary These four methods modify common "Content-Type" attributes. If set to "undef", the attribute is removed. All other "Content-Type" header information is preserved when modifying an attribute. encode_check encode_check_set $email->encode_check; $email->[encode_check_set(0)]; $email->encode_check_set([Encode::FB_DEFAULT]); Gets/sets the current "encode_check" setting (default: *FB_CROAK*). This is the parameter passed to "decode" in Encode and "encode" in Encode when "body_str()", "body_str_set()", and "create()" are called. With the default setting, [Email::MIME] may crash if the claimed charset of a body does not match its contents (for example - utf8 data in a text/plain; charset=us-ascii message). With an "encode_check" of 0, the unrecognized bytes will instead be replaced with the "REPLACEMENT CHARACTER" (U+0FFFD), and may end up as either that or question marks (?). See "Handling Malformed Data" in Encode for more information. encoding_set $email->encoding_set( 'base64' ); $email->encoding_set( 'quoted-printable' ); $email->encoding_set( '8bit' ); Convert the message body and alter the "Content-Transfer-Encoding" header using this method. Your message body, the output of the "body()" method, will remain the same. The raw body, output with the "body_raw()" method, will be changed to reflect the new encoding. body_set $email->body_set( $unencoded_body_string ); This method will encode the new body you send using the encoding specified in the "Content-Transfer-Encoding" header, then set the body to the new encoded body. This method overrides the default "body_set()" method. body_str_set $email->body_str_set($unicode_str); This method behaves like "body_set", but assumes that the given value is a Unicode string that should be encoded into the message's charset before being set. The charset must already be set, either manually (via the "attributes" argument to "create" or "charset_set") or through the "Content-Type" of a parsed message. If the charset can't be determined, an exception is thrown. disposition_set $email->disposition_set( 'attachment' ); Alter the "Content-Disposition" of a message. All header attributes will remain intact. filename_set $email->filename_set( 'boo.pdf' ); Sets the filename attribute in the "Content-Disposition" header. All other header information is preserved when setting this attribute. parts_set $email->parts_set( \@new_parts ); Replaces the parts for an object. Accepts a reference to a list of "[Email::MIME]" objects, representing the new parts. If this message was originally a single part, the "Content-Type" header will be changed to "multipart/mixed", and given a new boundary attribute. parts_add $email->parts_add( \@more_parts ); Adds MIME parts onto the current MIME part. This is a simple extension of "parts_set" to make our lives easier. It accepts an array reference of additional parts. walk_parts $email->walk_parts(sub { my ($part) = @_; return if $part->subparts; # multipart if ( $part->content_type =~ m[text/html]i ) { my $body = $part->body; $body =~ s/]+>//; # simple filter example $part->body_set( $body ); } }); Walks through all the MIME parts in a message and applies a callback to each. Accepts a code reference as its only argument. The code reference will be passed a single argument, the current MIME part within the top-level MIME object. All changes will be applied in place. header Achtung! Beware this method! In [Email::MIME], it means the same as "header_str", but on an [Email::Simple] object, it means "header_raw". Unless you always know what kind of object you have, you could get one of two significantly different behaviors. Try to use either "header_str" or "header_raw" as appropriate. header_str_set $email->header_str_set($header_name => @value_strings); This behaves like "header_raw_set", but expects Unicode (character) strings as the values to set, rather than pre-encoded byte strings. It will encode them as MIME encoded-words if they contain any control or 8-bit characters. Alternatively, values can be objects with "as_mime_string" method. Same as in method "create". header_str_pairs my @pairs = $email->header_str_pairs; This method behaves like "header_raw_pairs", returning a list of field name/value pairs, but the values have been decoded to character strings, when possible. header_as_obj my $first_obj = $email->header_as_obj($field); my $nth_obj = $email->header_as_obj($field, $index); my @all_objs = $email->header_as_obj($field); my $nth_obj_of_class = $email->header_as_obj($field, $index, $class); my @all_objs_of_class = $email->header_as_obj($field, undef, $class); This method returns an object representation of the header value. It instances new object via method "from_mime_string" of specified class. Input argument for that class method is list of the raw MIME-encoded values. If class argument is not specified then class name is taken from the hash %[Email::MIME::Header::header_to_class_map] via key field. Use class method "[Email::MIME::Header]->set_class_for_header($class, $field)" for adding new mapping. parts This returns a list of "[Email::MIME]" objects reflecting the parts of the message. If it's a single-part message, you get the original object back. In scalar context, this method returns the number of parts. This is a stupid method. Don't use it. subparts This returns a list of "[Email::MIME]" objects reflecting the parts of the message. If it's a single-part message, this method returns an empty list. In scalar context, this method returns the number of subparts. body This decodes and returns the body of the object *as a byte string*. For top-level objects in multi-part messages, this is highly likely to be something like "This is a multi-part message in MIME format." body_str This decodes both the Content-Transfer-Encoding layer of the body (like the "body" method) as well as the charset encoding of the body (unlike the "body" method), returning a Unicode string. If the charset is known, it is used. If there is no charset but the content type is either "text/plain" or "text/html", us-ascii is assumed. Otherwise, an exception is thrown. body_raw This returns the body of the object, but doesn't decode the transfer encoding. decode_hook This method is called before the [Email::MIME::Encodings] "decode" method, to decode the body of non-binary messages (or binary messages, if the "force_decode_hook" method returns true). By default, this method does nothing, but subclasses may define behavior. This method could be used to implement the decryption of content in secure email, for example. content_type This is a shortcut for access to the content type header. filename This provides the suggested filename for the attachment part. Normally it will return the filename from the headers, but if "filename" is passed a true parameter, it will generate an appropriate "stable" filename if one is not found in the MIME headers. invent_filename my $filename = [Email::MIME]->invent_filename($content_type); This routine is used by "filename" to generate filenames for attached files. It will attempt to choose a reasonable extension, falling back to dat. debug_structure my $description = $email->debug_structure; This method returns a string that describes the structure of the MIME entity. For example: + multipart/alternative; boundary="=_NextPart_2"; charset="BIG-5" + text/plain + text/html ## CONFIGURATION The variable $[Email::MIME::MAX_DEPTH] is the maximum depth of parts that will be processed. It defaults to 10, already higher than legitimate mail is ever likely to be. This value may go up over time as the parser is improved. ## TODO All of the [Email::MIME]-specific guts should move to a single entry on the object's guts. This will require changes to both [Email::MIME] and [Email::MIME::Modifier], sadly. ## SEE ALSO [Email::Simple], [Email::MIME::Modifier], [Email::MIME::Creator]. ## THANKS This module was generously sponsored by Best Practical (), Pete Sergeant, and Pobox.com. ## AUTHORS * Ricardo SIGNES <> * Casey West <> * Simon Cozens <> ## CONTRIBUTORS * Alex Vandiver <> * Anirvan Chatterjee <> * Arthur Axel 'fREW' Schmidt <> * Brian Cassidy <> * Damian Lukowski <> * Dan Book <> * David Steinbrunner <> * Dotan Dimet <> * dxdc <> * Eric Wong <> * Geraint Edwards <> * ivulfson <9122139+> * Jesse Luehrs <> * Kurt Anderson <> * Lance A. Brown <> * Matthew Horsfall <> * memememomo <> * Michael McClimon <> * Mishrakk <48946018+> * Pali <> * Shawn Sorichetti <> * Tomohiro Hosaka <> ## COPYRIGHT AND LICENSE This software is copyright (c) 2004 by Simon Cozens and Casey West. This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.