# zstdmt - zstd, zstdmt, unzstd, zstdcat - Compress or decompress... - man(1) - [phpMan] > **TLDR:** This command is an alias of `zstd --threads 0`. > - View documentation for the original command: `tldr zstd` *Source: tldr-pages* --- [_ZSTD_(1)](https://www.chedong.com/phpMan.php/man/ZSTD/1/markdown) User Commands [_ZSTD_(1)](https://www.chedong.com/phpMan.php/man/ZSTD/1/markdown) ## NAME **zstd **- zstd, zstdmt, unzstd, zstdcat - Compress or decompress .zst files ## SYNOPSIS **zstdmt **is equivalent to **zstd -T0** **unzstd **is equivalent to **zstd -d** **zstdcat **is equivalent to **zstd -dcf** ## DESCRIPTION **zstd **is a fast lossless compression algorithm and data compression tool, with command line syntax similar to [**gzip**(1)](https://www.chedong.com/phpMan.php/man/gzip/1/markdown) and [**xz**(1)](https://www.chedong.com/phpMan.php/man/xz/1/markdown). It is based on the **LZ77 **family, with further FSE & huff0 entropy stages. **zstd **offers highly configurable compression speed, from fast modes at > 200 MB/s per core, to strong modes with excellent compression ratios. It also features a very fast decoder, with speeds > 500 MB/s per core. **zstd **command line syntax is generally similar to gzip, but features the following differ‐ ences: ○ Source files are preserved by default. It´s possible to remove them automatically by us‐ ing the **--rm **command. ○ When compressing a single file, **zstd **displays progress notifications and result summary by default. Use **-q **to turn them off. ○ **zstd **displays a short help page when command line is an error. Use **-q **to turn it off. ○ **zstd **does not accept input from console, though it does accept **stdin **when it´s not the console. ○ **zstd **does not store the input´s filename or attributes, only its contents. **zstd **processes each _file_ according to the selected operation mode. If no _files_ are given or _file_ is **-**, **zstd **reads from standard input and writes the processed data to standard output. **zstd **will refuse to write compressed data to standard output if it is a terminal: it will display an error message and skip the file. Similarly, **zstd **will refuse to read compressed data from standard input if it is a terminal. Unless **--stdout **or **-o **is specified, _files_ are written to a new file whose name is derived from the source _file_ name: ○ When compressing, the suffix **.zst **is appended to the source filename to get the target filename. ○ When decompressing, the **.zst **suffix is removed from the source filename to get the target filename ### Concatenation with .zst Files It is possible to concatenate multiple **.zst **files. **zstd **will decompress such agglomerated file as if it was a single **.zst **file. ## OPTIONS ### Integer Suffixes and Special Values In most places where an integer argument is expected, an optional suffix is supported to eas‐ ily indicate large integers. There must be no space between the integer and the suffix. **KiB **Multiply the integer by 1,024 (2\^10). **Ki**, **K**, and **KB **are accepted as synonyms for **KiB**. **MiB **Multiply the integer by 1,048,576 (2\^20). **Mi**, **M**, and **MB **are accepted as synonyms for **MiB**. ### Operation Mode If multiple operation mode options are given, the last one takes effect. ### -z --compress Compress. This is the default operation mode when no operation mode option is speci‐ fied and no other operation mode is implied from the command name (for example, **unzstd** implies **--decompress**). ### -d --decompress --uncompress Decompress. ### -t --test Test the integrity of compressed _files_. This option is equivalent to **--decompress** **--stdout > /dev/null**, decompressed data is discarded and checksummed for errors. No files are created or removed. ### -b# this operation. ### --train FILES Use _FILES_ as a training set to create a dictionary. The training set should contain a lot of small files (> 100). See _DICTIONARY_ _BUILDER_ below for a description of this op‐ eration. ### -l --list Display information related to a zstd compressed file, such as size, ratio, and check‐ sum. Some of these fields may not be available. This command´s output can be augmented with the **-v **modifier. ### Operation Modifiers ○ **-#**: selects **# **compression level [1-19] (default: 3) ○ **--ultra**: unlocks high compression levels 20+ (maximum 22), using a lot more memory. Note that decompression will also require more memory when using these levels. ○ **--fast[=#]**: switch to ultra-fast compression levels. If **=# **is not present, it defaults to **1**. The higher the value, the faster the compression speed, at the cost of some compres‐ sion ratio. This setting overwrites compression level if one was set previously. Simi‐ larly, if a compression level is set after **--fast**, it overrides it. ○ **-T#**, **--threads=#**: Compress using **# **working threads (default: 1). If **# **is 0, attempt to detect and use the number of physical CPU cores. In all cases, the nb of threads is capped to **ZSTDMT_NBWORKERS_MAX**, which is either 64 in 32-bit mode, or 256 for 64-bit en‐ vironments. This modifier does nothing if **zstd **is compiled without multithread support. ○ **--single-thread**: Use a single thread for both I/O and compression. As compression is se‐ rialized with I/O, this can be slightly slower. Single-thread mode features significantly lower memory usage, which can be useful for systems with limited amount of memory, such as 32-bit systems. Note 1: this mode is the only available one when multithread support is disabled. Note 2: this mode is different from **-T1**, which spawns 1 compression thread in parallel with I/O. Final compressed result is also slightly different from **-T1**. ○ **--auto-threads={physical,logical} (default: physical)**: When using a default amount of threads via **-T0**, choose the default based on the number of detected physical or logical cores. ○ **--adapt[=min=#,max=#]**: **zstd **will dynamically adapt compression level to perceived I/O conditions. Compression level adaptation can be observed live by using command **-v**. Adap‐ tation can be constrained between supplied **min **and **max **levels. The feature works when combined with multi-threading and **--long **mode. It does not work with **--single-thread**. It sets window size to 8 MiB by default (can be changed manually, see **wlog**). Due to the chaotic nature of dynamic adaptation, compressed result is not reproducible. _Note_: at the time of this writing, **--adapt **can remain stuck at low speed when combined with multiple worker threads (>=2). ○ **--long[=#]**: enables long distance matching with **# windowLog**, if **# **is not present it de‐ faults to **27**. This increases the window size (**windowLog**) and memory usage for both the compressor and decompressor. This setting is designed to improve the compression ratio for files with long matches at a large distance. Note: If **windowLog **is set to larger than 27, **--long=windowLog **or **--memory=windowSize** needs to be passed to the decompressor. ○ **-D DICT**: use **DICT **as Dictionary to compress or decompress FILE(s) ○ **--patch-from FILE**: Specify the file to be used as a reference point for zstd´s diff en‐ gine. This is effectively dictionary compression with some convenient parameter selec‐ tion, namely that _windowSize_ > _srcSize_. Note: cannot use both this and **-D **together. Note: **--long **mode will be automatically activated if _chainLog_ < _fileLog_ (_fileLog_ being the _windowLog_ required to cover the whole file). You can also manually force it. Note: for all levels, you can use **--patch-from **in **--single-thread **mode to improve com‐ pression ratio at the cost of speed. Note: for level 19, you can get increased compression ratio at the cost of speed by spec‐ ifying **--zstd=targetLength= **to be something large (i.e. 4096), and by setting a large **--zstd=chainLog=**. ○ **--rsyncable**: **zstd **will periodically synchronize the compression state to make the com‐ pressed file more rsync-friendly. There is a negligible impact to compression ratio, and a potential impact to compression speed, perceptible at higher speeds, for example when combining **--rsyncable **with many parallel worker threads. This feature does not work with **--single-thread**. You probably don´t want to use it with long range mode, since it will decrease the effectiveness of the synchronization points, but your mileage may vary. ○ **-C**, **--[no-]check**: add integrity check computed from uncompressed data (default: enabled) ○ **--[no-]content-size**: enable / disable whether or not the original size of the file is placed in the header of the compressed file. The default option is **--content-size **(mean‐ ing that the original size will be placed in the header). ○ **--no-dictID**: do not store dictionary ID within frame header (dictionary compression). The decoder will have to rely on implicit knowledge about which dictionary to use, it won´t be able to check if it´s correct. ○ **-M#**, **--memory=#**: Set a memory usage limit. By default, **zstd **uses 128 MiB for decompres‐ sion as the maximum amount of memory the decompressor is allowed to use, but you can override this manually if need be in either direction (i.e. you can increase or decrease it). This is also used during compression when using with **--patch-from=**. In this case, this parameter overrides that maximum size allowed for a dictionary. (128 MiB). Additionally, this can be used to limit memory for dictionary training. This parameter overrides the default limit of 2 GiB. zstd will load training samples up to the memory limit and ignore the rest. ○ **--stream-size=#**: Sets the pledged source size of input coming from a stream. This value must be exact, as it will be included in the produced frame header. Incorrect stream sizes will cause an error. This information will be used to better optimize compression parameters, resulting in better and potentially faster compression, especially for smaller source sizes. ○ **--size-hint=#**: When handling input from a stream, **zstd **must guess how large the source size will be when optimizing compression parameters. If the stream size is relatively small, this guess may be a poor one, resulting in a higher compression ratio than ex‐ pected. This feature allows for controlling the guess when needed. Exact guesses result in better compression ratios. Overestimates result in slightly degraded compression ra‐ tios, while underestimates may result in significant degradation. ○ **-o FILE**: save result into **FILE**. ○ **-f**, **--force**: disable input and output checks. Allows overwriting existing files, input from console, output to stdout, operating on links, block devices, etc. During decompres‐ sion and when the output destination is stdout, pass-through unrecognized formats as-is. ○ **-c**, **--stdout**: write to standard output (even if it is the console); keep original files unchanged. ○ **--[no-]sparse**: enable / disable sparse FS support, to make files with many zeroes smaller on disk. Creating sparse files may save disk space and speed up decompression by reducing the amount of disk I/O. default: enabled when output is into a file, and disabled when output is stdout. This setting overrides default and can force sparse mode over stdout. ○ **--[no-]pass-through **enable / disable passing through uncompressed files as-is. During de‐ compression when pass-through is enabled, unrecognized formats will be copied as-is from the input to the output. By default, pass-through will occur when the output destination is stdout and the force (**-f**) option is set. ○ **--rm**: remove source file(s) after successful compression or decompression. This command is silently ignored if output is **stdout**. If used in combination with **-o**, triggers a con‐ firmation prompt (which can be silenced with **-f**), as this is a destructive operation. ○ **-k**, **--keep**: keep source file(s) after successful compression or decompression. This is the default behavior. ○ **-r**: operate recursively on directories. It selects all files in the named directory and all its subdirectories. This can be useful both to reduce command line typing, and to circumvent shell expansion limitations, when there are a lot of files and naming breaks the maximum size of a command line. ○ **--filelist FILE **read a list of files to process as content from **FILE**. Format is compati‐ ble with **ls **output, with one file per line. ○ **--output-dir-flat DIR**: resulting files are stored into target **DIR **directory, instead of same directory as origin file. Be aware that this command can introduce name collision issues, if multiple files, from different directories, end up having the same name. Col‐ lision resolution ensures first file with a given name will be present in **DIR**, while in combination with **-f**, the last file will be present instead. ○ **--output-dir-mirror DIR**: similar to **--output-dir-flat**, the output files are stored under‐ neath target **DIR **directory, but this option will replicate input directory hierarchy into output **DIR**. If input directory contains "..", the files in this directory will be ignored. If input directory is an absolute directory (i.e. "/var/tmp/abc"), it will be stored into the "output-dir/var/tmp/abc". If there are multiple input files or directories, name colli‐ sion resolution will follow the same rules as **--output-dir-flat**. ○ **--format=FORMAT**: compress and decompress in other formats. If compiled with support, zstd can compress to or decompress from other compression algorithm formats. Possibly avail‐ able options are **zstd**, **gzip**, **xz**, **lzma**, and **lz4**. If no such format is provided, **zstd **is the default. ○ **-h**/**-H**, **--help**: display help/long help and exit ○ **-V**, **--version**: display version number and exit. Advanced: **-vV **also displays supported formats. **-vvV **also displays POSIX support. **-q **will only display the version number, suit‐ able for machine reading. ○ **-v**, **--verbose**: verbose mode, display more information ○ **-q**, **--quiet**: suppress warnings, interactivity, and notifications. specify twice to sup‐ press errors too. ○ **--no-progress**: do not display the progress bar, but keep all other messages. ○ **--show-default-cparams**: shows the default compression parameters that will be used for a particular input file, based on the provided compression level and the input size. If the provided file is not a regular file (e.g. a pipe), this flag will output the parameters used for inputs of unknown size. ○ **--**: All arguments after **-- **are treated as files ### gzip Operation Modifiers When invoked via a **gzip **symlink, **zstd **will support further options that intend to mimic the **gzip **behavior: ### -n --no-name do not store the original filename and timestamps when compressing a file. This is the default behavior and hence a no-op. **--best **alias to the option **-9**. ### Environment Variables Employing environment variables to set parameters has security implications. Therefore, this avenue is intentionally limited. Only **ZSTD_CLEVEL **and **ZSTD_NBTHREADS **are currently supported. They set the compression level and number of threads to use during compression, respectively. **ZSTD_CLEVEL **can be used to set the level between 1 and 19 (the "normal" range). If the value of **ZSTD_CLEVEL **is not a valid integer, it will be ignored with a warning message. **ZSTD_CLEVEL** just replaces the default compression level (**3**). **ZSTD_NBTHREADS **can be used to set the number of threads **zstd **will attempt to use during com‐ pression. If the value of **ZSTD_NBTHREADS **is not a valid unsigned integer, it will be ignored with a warning message. **ZSTD_NBTHREADS **has a default value of (**1**), and is capped at ZST‐ DMT_NBWORKERS_MAX==200. **zstd **must be compiled with multithread support for this to have any effect. They can both be overridden by corresponding command line arguments: **-# **for compression level and **-T# **for number of compression threads. ## DICTIONARY BUILDER **zstd **offers _dictionary_ compression, which greatly improves efficiency on small files and mes‐ sages. It´s possible to train **zstd **with a set of samples, the result of which is saved into a file called a **dictionary**. Then, during compression and decompression, reference the same dic‐ tionary, using command **-D dictionaryFileName**. Compression of small files similar to the sam‐ ple set will be greatly improved. ### --train FILEs Use FILEs as training set to create a dictionary. The training set should ideally con‐ tain a lot of samples (> 100), and weight typically 100x the target dictionary size (for example, ~10 MB for a 100 KB dictionary). **--train **can be combined with **-r **to in‐ dicate a directory rather than listing all the files, which can be useful to circum‐ vent shell expansion limits. Since dictionary compression is mostly effective for small files, the expectation is that the training set will only contain small files. In the case where some samples happen to be large, only the first 128 KiB of these samples will be used for training. **--train **supports multithreading if **zstd **is compiled with threading support (default). Additional advanced parameters can be specified with **--train-fastcover**. The legacy dictionary builder can be accessed with **--train-legacy**. The slower cover dictionary builder can be accessed with **--train-cover**. Default **--train **is equivalent to **--train-fastcover=d=8,steps=4**. ### -o FILE Dictionary saved into **FILE **(default name: dictionary). ### --maxdict=# Limit dictionary to specified size (default: 112640 bytes). As usual, quantities are expressed in bytes by default, and it´s possible to employ suffixes (like **KB **or **MB**) to specify larger values. **-# **Use **# **compression level during training (optional). Will generate statistics more tuned for selected compression level, resulting in a _small_ compression ratio improve‐ ment for this level. ### -B# ### -M# --memory=# Limit the amount of sample data loaded for training (default: 2 GB). Note that the de‐ fault (2 GB) is also the maximum. This parameter can be useful in situations where the training set size is not well controlled and could be potentially very large. Since speed of the training process is directly correlated to the size of the training sam‐ ple set, a smaller sample set leads to faster training. In situations where the training set is larger than maximum memory, the CLI will ran‐ domly select samples among the available ones, up to the maximum allowed memory bud‐ get. This is meant to improve dictionary relevance by mitigating the potential impact of clustering, such as selecting only files from the beginning of a list sorted by modification date, or sorted by alphabetical order. The randomization process is de‐ terministic, so training of the same list of files with the same parameters will lead to the creation of the same dictionary. ### --dictID=# A dictionary ID is a locally unique ID. The decoder will use this value to verify it is using the right dictionary. By default, zstd will create a 4-bytes random number ID. It´s possible to provide an explicit number ID instead. It´s up to the dictionary manager to not assign twice the same ID to 2 different dictionaries. Note that short numbers have an advantage: an ID < 256 will only need 1 byte in the compressed frame header, and an ID < 65536 will only need 2 bytes. This compares favorably to 4 bytes default. Note that RFC8878 reserves IDs less than 32768 and greater than or equal to 2\^31, so they should not be used in public. ### --train-cover[=k#,d=#,steps=#,split=#,shrink[=#]] Select parameters for the default dictionary builder algorithm named cover. If _d_ is not specified, then it tries _d_ = 6 and _d_ = 8. If _k_ is not specified, then it tries _steps_ values in the range [50, 2000]. If _steps_ is not specified, then the default value of 40 is used. If _split_ is not specified or split <= 0, then the default value of 100 is used. Requires that _d_ <= _k_. If _shrink_ flag is not used, then the default value for _shrinkDict_ of 0 is used. If _shrink_ is not specified, then the default value for _shrinkDictMaxRegression_ of 1 is used. Selects segments of size _k_ with highest score to put in the dictionary. The score of a segment is computed by the sum of the frequencies of all the subsegments of size _d_. Generally _d_ should be in the range [6, 8], occasionally up to 16, but the algorithm will run faster with d <= _8_. Good values for _k_ vary widely based on the input data, but a safe range is [2 * _d_, 2000]. If _split_ is 100, all input samples are used for both training and testing to find optimal _d_ and _k_ to build dictionary. Supports multi‐ threading if **zstd **is compiled with threading support. Having _shrink_ enabled takes a truncated dictionary of minimum size and doubles in size until compression ratio of the truncated dictionary is at most _shrinkDictMaxRegression%_ worse than the compres‐ sion ratio of the largest dictionary. Examples: **zstd --train-cover FILEs** **zstd --train-cover=k=50,d=8 FILEs** **zstd --train-cover=d=8,steps=500 FILEs** **zstd --train-cover=k=50 FILEs** **zstd --train-cover=k=50,split=60 FILEs** **zstd --train-cover=shrink FILEs** **zstd --train-cover=shrink=2 FILEs** ### --train-fastcover[=k#,d=#,f=#,steps=#,split=#,accel=#] Same as cover but with extra parameters _f_ and _accel_ and different default value of split If _split_ is not specified, then it tries _split_ = 75. If _f_ is not specified, then it tries _f_ = 20. Requires that 0 < _f_ < 32. If _accel_ is not specified, then it tries _accel_ = 1. Requires that 0 < _accel_ <= 10. Requires that _d_ = 6 or _d_ = 8. _f_ is log of size of array that keeps track of frequency of subsegments of size _d_. The subsegment is hashed to an index in the range [0,2^_f_ - 1]. It is possible that 2 dif‐ ferent subsegments are hashed to the same index, and they are considered as the same subsegment when computing frequency. Using a higher _f_ reduces collision but takes longer. Examples: **zstd --train-fastcover FILEs** **zstd --train-fastcover=d=8,f=15,accel=2 FILEs** ### --train-legacy[=selectivity=#] Use legacy dictionary builder algorithm with the given dictionary _selectivity_ (de‐ fault: 9). The smaller the _selectivity_ value, the denser the dictionary, improving its efficiency but reducing its achievable maximum size. **--train-legacy=s=# **is also ac‐ cepted. Examples: **zstd --train-legacy FILEs** **zstd --train-legacy=selectivity=8 FILEs** ## BENCHMARK ### -b# ### -e# -b# -e# ### -i# ### -B# --block-size=# cut file(s) into independent chunks of size # (default: no chunking) ### --priority=rt set process priority to real-time **Output Format: **CompressionLevel#Filename: InputSize -> OutputSize (CompressionRatio), Com‐ pressionSpeed, DecompressionSpeed **Methodology: **For both compression and decompression speed, the entire input is compressed/de‐ compressed in-memory to measure speed. A run lasts at least 1 sec, so when files are small, they are compressed/decompressed several times per run, in order to improve measurement accu‐ racy. ## ADVANCED COMPRESSION OPTIONS ### -B#: Specify the size of each compression job. This parameter is only available when multi-threading is enabled. Each compression job is run in parallel, so this value indirectly impacts the nb of active threads. Default job size varies depending on compression level (generally **4 * windowSize**). **-B# **makes it possible to manually select a custom size. Note that job size must respect a minimum value which is enforced transparently. This minimum is either 512 KB, or **overlapSize**, whichever is largest. Different job sizes will lead to non-identical compressed frames. ### --zstd[=options]: **zstd **provides 22 predefined regular compression levels plus the fast levels. This compression level is translated internally into a number of specific parameters that actually control the behavior of the compressor. (You can see the result of this translation with **--show-de‐** **fault-cparams**.) These specific parameters can be overridden with advanced compression op‐ tions. The _options_ are provided as a comma-separated list. You may specify only the options you want to change and the rest will be taken from the selected or default compression level. The list of available _options_: **strategy**=_strat_, **strat**=_strat_ Specify a strategy used by a match finder. There are 9 strategies numbered from 1 to 9, from fastest to strongest: 1=**ZSTD_fast**, 2=**ZSTD_dfast**, 3=**ZSTD_greedy**, 4=**ZSTD_lazy**, 5=**ZSTD_lazy2**, 6=**ZSTD_btlazy2**, 7=**ZSTD_btopt**, 8=**ZSTD_btultra**, 9=**ZSTD_btultra2**. **windowLog**=_wlog_, **wlog**=_wlog_ Specify the maximum number of bits for a match distance. The higher number of increases the chance to find a match which usually improves com‐ pression ratio. It also increases memory requirements for the compressor and decom‐ pressor. The minimum _wlog_ is 10 (1 KiB) and the maximum is 30 (1 GiB) on 32-bit plat‐ forms and 31 (2 GiB) on 64-bit platforms. Note: If **windowLog **is set to larger than 27, **--long=windowLog **or **--memory=windowSize** needs to be passed to the decompressor. **hashLog**=_hlog_, **hlog**=_hlog_ Specify the maximum number of bits for a hash table. Bigger hash tables cause fewer collisions which usually makes compression faster, but requires more memory during compression. The minimum _hlog_ is 6 (64 entries / 256 B) and the maximum is 30 (1B entries / 4 GiB). **chainLog**=_clog_, **clog**=_clog_ Specify the maximum number of bits for the secondary search structure, whose form de‐ pends on the selected **strategy**. Higher numbers of bits increases the chance to find a match which usually improves compression ratio. It also slows down compression speed and increases memory require‐ ments for compression. This option is ignored for the **ZSTD_fast strategy**, which only has the primary hash table. The minimum _clog_ is 6 (64 entries / 256 B) and the maximum is 29 (512M entries / 2 GiB) on 32-bit platforms and 30 (1B entries / 4 GiB) on 64-bit platforms. **searchLog**=_slog_, **slog**=_slog_ Specify the maximum number of searches in a hash chain or a binary tree using loga‐ rithmic scale. More searches increases the chance to find a match which usually increases compression ratio but decreases compression speed. The minimum _slog_ is 1 and the maximum is ´windowLog´ - 1. **minMatch**=_mml_, **mml**=_mml_ Specify the minimum searched length of a match in a hash table. Larger search lengths usually decrease compression ratio but improve decompression speed. The minimum _mml_ is 3 and the maximum is 7. **targetLength**=_tlen_, **tlen**=_tlen_ The impact of this field vary depending on selected strategy. For **ZSTD_btopt**, **ZSTD_btultra **and **ZSTD_btultra2**, it specifies the minimum match length that causes match finder to stop searching. A larger **targetLength **usually improves compression ratio but decreases compression speed. For **ZSTD_fast**, it triggers ultra-fast mode when > 0. The value represents the amount of data skipped between match sampling. Impact is reversed: a larger **targetLength **in‐ creases compression speed but decreases compression ratio. For all other strategies, this field has no impact. The minimum _tlen_ is 0 and the maximum is 128 KiB. **overlapLog**=_ovlog_, **ovlog**=_ovlog_ Determine **overlapSize**, amount of data reloaded from previous job. This parameter is only available when multithreading is enabled. Reloading more data improves compres‐ sion ratio, but decreases speed. The minimum _ovlog_ is 0, and the maximum is 9. 1 means "no overlap", hence completely independent jobs. 9 means "full overlap", meaning up to **windowSize **is reloaded from previous job. Reducing _ovlog_ by 1 reduces the reloaded amount by a factor 2. For exam‐ ple, 8 means "windowSize/2", and 6 means "windowSize/8". Value 0 is special and means "default": _ovlog_ is automatically determined by **zstd**. In which case, _ovlog_ will range from 6 to 9, depending on selected _strat_. **ldmHashLog**=_lhlog_, **lhlog**=_lhlog_ Specify the maximum size for a hash table used for long distance matching. This option is ignored unless long distance matching is enabled. Bigger hash tables usually improve compression ratio at the expense of more memory during compression and a decrease in compression speed. The minimum _lhlog_ is 6 and the maximum is 30 (default: 20). **ldmMinMatch**=_lmml_, **lmml**=_lmml_ Specify the minimum searched length of a match for long distance matching. This option is ignored unless long distance matching is enabled. Larger/very small values usually decrease compression ratio. The minimum _lmml_ is 4 and the maximum is 4096 (default: 64). **ldmBucketSizeLog**=_lblog_, **lblog**=_lblog_ Specify the size of each bucket for the hash table used for long distance matching. This option is ignored unless long distance matching is enabled. Larger bucket sizes improve collision resolution but decrease compression speed. The minimum _lblog_ is 1 and the maximum is 8 (default: 3). **ldmHashRateLog**=_lhrlog_, **lhrlog**=_lhrlog_ Specify the frequency of inserting entries into the long distance matching hash table. This option is ignored unless long distance matching is enabled. Larger values will improve compression speed. Deviating far from the default value will likely result in a decrease in compression ratio. The default value is **wlog - lhlog**. ### Example The following parameters sets advanced compression options to something similar to predefined level 19 for files bigger than 256 KB: **--zstd**=wlog=23,clog=23,hlog=22,slog=6,mml=3,tlen=48,strat=6 ## SEE ALSO [**zstdgrep**(1)](https://www.chedong.com/phpMan.php/man/zstdgrep/1/markdown), [**zstdless**(1)](https://www.chedong.com/phpMan.php/man/zstdless/1/markdown), [**gzip**(1)](https://www.chedong.com/phpMan.php/man/gzip/1/markdown), [**xz**(1)](https://www.chedong.com/phpMan.php/man/xz/1/markdown) The _zstandard_ format is specified in Y. Collet, "Zstandard Compression and the ´applica‐ tion/zstd´ Media Type", , Internet RFC 8878 (February 2021). ## BUGS Report bugs at: ## AUTHOR Yann Collet zstd 1.5.5 March 2023 [_ZSTD_(1)](https://www.chedong.com/phpMan.php/man/ZSTD/1/markdown)