# wipefs(8) - man - phpman

> **TLDR:** Wipe filesystem, raid, or partition-table signatures from a device.
>
- Display signatures for specified device:
  `sudo wipefs {{/dev/sdX}}`
- Wipe all available signature types for a specific device with no recursion into partitions:
  `sudo wipefs {{-a|--all}} {{/dev/sdX}}`
- Wipe all available signature types for the device and partitions using a glob pattern:
  `sudo wipefs {{-a|--all}} {{/dev/sdX}}*`
- Perform dry run:
  `sudo wipefs {{-a|--all}} {{-n|--no-act}} {{/dev/sdX}}`
- Force wipe, even if the filesystem is mounted:
  `sudo wipefs {{-a|--all}} {{-f|--force}} {{/dev/sdX}}`

*Source: tldr-pages*

---

[WIPEFS(8)](https://www.chedong.com/phpMan.php/man/WIPEFS/8/markdown)                               System Administration                              [WIPEFS(8)](https://www.chedong.com/phpMan.php/man/WIPEFS/8/markdown)



## NAME
       wipefs - wipe a signature from a device

## SYNOPSIS
       **wipefs** [options] _device_...

       **wipefs** [**--backup**] **-o** _offset_ _device_...

       **wipefs** [**--backup**] **-a** _device_...

## DESCRIPTION
       **wipefs** can erase filesystem, raid or partition-table signatures (magic strings) from the
       specified _device_ to make the signatures invisible for libblkid. **wipefs** does not erase the
       filesystem itself nor any other data from the device.

       When used without any options, **wipefs** lists all visible filesystems and the offsets of their
       basic signatures. The default output is subject to change. So whenever possible, you should
       avoid using default outputs in your scripts. Always explicitly define expected columns by
       using **--output** _columns-list_ in environments where a stable output is required.

       **wipefs** calls the BLKRRPART ioctl when it has erased a partition-table signature to inform the
       kernel about the change. The ioctl is called as the last step and when all specified
       signatures from all specified devices are already erased. This feature can be used to wipe
       content on partitions devices as well as partition table on a disk device, for example by
       **wipefs** **-a** **/dev/sdc1** **/dev/sdc2** **/dev/sdc**.

       Note that some filesystems and some partition tables store more magic strings on the device
       (e.g., FAT, ZFS, GPT). The **wipefs** command (since v2.31) lists all the offset where a magic
       strings have been detected.

       When option **-a** is used, all magic strings that are visible for [**libblkid**(3)](https://www.chedong.com/phpMan.php/man/libblkid/3/markdown) are erased. In
       this case the **wipefs** scans the device again after each modification (erase) until no magic
       string is found.

       Note that by default **wipefs** does not erase nested partition tables on non-whole disk devices.
       For this the option **--force** is required.

## OPTIONS
### -a --all
           Erase all available signatures. The set of erased signatures can be restricted with the
           **-t** option.

### -b --backup
           Create a signature backup to the file _$HOME/wipefs-<devname>-<offset>.bak_. For more
           details see the **EXAMPLE** section.

### -f --force
           Force erasure, even if the filesystem is mounted. This is required in order to erase a
           partition-table signature on a block device.

### -h --help
           Display help text and exit.

### -J --json
           Use JSON output format.

       **--lock**[=_mode_]
           Use exclusive BSD lock for device or file it operates. The optional argument _mode_ can be
           **yes**, **no** (or 1 and 0) or **nonblock**. If the _mode_ argument is omitted, it defaults to **"yes"**.
           This option overwrites environment variable **$LOCK**___**BLOCK**___**DEVICE**. The default is not to use
           any lock at all, but it’s recommended to avoid collisions with udevd or other tools.

### -i --noheadings
           Do not print a header line.

### -O --output
           Specify which output columns to print. Use **--help** to get a list of all supported columns.

### -n --no-act
           Causes everything to be done except for the [**write**(2)](https://www.chedong.com/phpMan.php/man/write/2/markdown) call.

### -o --offset
           Specify the location (in bytes) of the signature which should be erased from the device.
           The _offset_ number may include a "0x" prefix; then the number will be interpreted as a hex
           value. It is possible to specify multiple **-o** options.

           The _offset_ argument may be followed by the multiplicative suffixes KiB (=1024), MiB
           (=1024*1024), and so on for GiB, TiB, PiB, EiB, ZiB and YiB (the "iB" is optional, e.g.,
           "K" has the same meaning as "KiB"), or the suffixes KB (=1000), MB (=1000*1000), and so
           on for GB, TB, PB, EB, ZB and YB.

### -p --parsable
           Print out in parsable instead of printable format. Encode all potentially unsafe
           characters of a string to the corresponding hex value prefixed by '\x'.

### -q --quiet
           Suppress any messages after a successful signature wipe.

### -t --types
           Limit the set of printed or erased signatures. More than one type may be specified in a
           comma-separated list. The list or individual types can be prefixed with 'no' to specify
           the types on which no action should be taken. For more details see [**mount**(8)](https://www.chedong.com/phpMan.php/man/mount/8/markdown).

### -V --version
           Display version information and exit.

## ENVIRONMENT
       LIBBLKID_DEBUG=all
           enables [**libblkid**(3)](https://www.chedong.com/phpMan.php/man/libblkid/3/markdown) debug output.

       LOCK_BLOCK_DEVICE=<mode>
           use exclusive BSD lock. The mode is "1" or "0". See **--lock** for more details.

## EXAMPLES
       **wipefs** **/dev/sda***
           Prints information about sda and all partitions on sda.

### wipefs --all --backup /dev/sdb
           Erases all signatures from the device _/dev/sdb_ and creates a signature backup file
           _~/wipefs-sdb-<offset>.bak_ for each signature.

### dd if=~/wipefs-sdb-0x00000438.bak of=/dev/sdb seek=$0x00000438 bs=1 conv=notrunc
           Restores an ext2 signature from the backup file _~/wipefs-sdb-0x00000438.bak_.

## AUTHORS
       Karel Zak <<kzak@redhat.com>>

## SEE ALSO
       [**blkid**(8)](https://www.chedong.com/phpMan.php/man/blkid/8/markdown), [**findfs**(8)](https://www.chedong.com/phpMan.php/man/findfs/8/markdown)

## REPORTING BUGS
       For bug reports, use the issue tracker at <https://github.com/karelzak/util-linux/issues>.

## AVAILABILITY
       The **wipefs** command is part of the util-linux package which can be downloaded from Linux
       Kernel Archive <<https://www.kernel.org/pub/linux/utils/util-linux/>>.



util-linux 2.37.2                            2021-06-02                                    [WIPEFS(8)](https://www.chedong.com/phpMan.php/man/WIPEFS/8/markdown)
