{
    "content": [
        {
            "type": "text",
            "text": "# vgimportclone(8) (man)\n\n**Summary:** vgimportclone - Import a VG from cloned PVs\n\n**Synopsis:** vgimportclone positionargs\n[ optionargs ]\n\n## Flags\n\n| Flag | Long | Arg | Description |\n|------|------|-----|-------------|\n| -n | --basevgname | — | By default the snapshot VG will be renamed to the original name plus a numeric suffix to avoid duplicate naming (e.g. 't |\n| -d | --debug | — | Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if conf |\n| -h | --help | — | Display help text. |\n| -i | --import | — | Import exported VGs. Otherwise VGs that have been exported will not be changed (nor will their associated PVs). --lockop |\n| — | --longhelp | — | Display long help text. |\n| — | --nolocking | — | Disable locking. --profile String An alias for --commandprofile or --metadataprofile, depending on the command. |\n| -q | --quiet | — | Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer  |\n| -t | --test | — | Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but neverthel |\n| -v | --verbose | — | Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr. |\n| — | --version | — | Display version information. |\n| -y | --yes | — | Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic  |\n\n## Examples\n\n- `An original VG \"vg00\" has PVs \"/dev/sda\" and \"/dev/sdb\".  The corresponding PVs from a  hard‐`\n- `ware  snapshot  are  \"/dev/sdc\" and \"/dev/sdd\".  Rename the VG associated with \"/dev/sdc\" and`\n- `\"/dev/sdd\" from \"vg00\" to \"vg00snap\" (and change associated UUIDs).`\n- `vgimportclone --basevgname vg00snap /dev/sdc /dev/sdd`\n\n## See Also\n\n- lvm(8)\n- lvm.conf(5)\n- lvmconfig(8)\n- pvchange(8)\n- pvck(8)\n- pvcreate(8)\n- pvdisplay(8)\n- pvmove(8)\n- pvremove(8)\n- pvresize(8)\n- pvs(8)\n- can(8)\n- vgcfgbackup(8)\n- vgcfgrestore(8)\n- vgchange(8)\n- vgck(8)\n- vgcreate(8)\n- vgconvert(8)\n- vgdisplay(8)\n- export(8)\n- vgextend(8)\n- vgimport(8)\n- vgmerge(8)\n- vgmknodes(8)\n- vgreduce(8)\n- move(8)\n- vgrename(8)\n- vgs(8)\n- vgscan(8)\n- vgsplit(8)\n- lvcreate(8)\n- lvchange(8)\n- lvconvert(8)\n- lvdisplay(8)\n- lvextend(8)\n- lvreduce(8)\n- lvremove(8)\n- name(8)\n- lvresize(8)\n- lvs(8)\n- lvscan(8)\n- lvm-fullreport(8)\n- lvm-lvpoll(8)\n- lvm2-activation-generator(8)\n- blkdeactivate(8)\n- lvmdump(8)\n- dmeventd(8)\n- lvmpolld(8)\n- lvmlockd(8)\n- lvmlockctl(8)\n- cmirrord(8)\n- lvmdbusd(8)\n- lvmsystemid(7)\n- lvmreport(7)\n- lvmraid(7)\n- lvmthin(7)\n- lvmcache(7)\n\n## Section Outline\n\n- **NAME** (2 lines)\n- **SYNOPSIS** (3 lines)\n- **DESCRIPTION** (6 lines)\n- **USAGE** (21 lines)\n- **OPTIONS** (1 lines) — 11 subsections\n  - -n --basevgname (15 lines)\n  - -d --debug (7 lines)\n  - -h --help (2 lines)\n  - -i --import (7 lines)\n  - --longhelp (2 lines)\n  - --nolocking (5 lines)\n  - -q --quiet (3 lines)\n  - -t --test (5 lines)\n  - -v --verbose (3 lines)\n  - --version (2 lines)\n  - -y --yes (3 lines)\n- **VARIABLES** (20 lines)\n- **ENVIRONMENT VARIABLES** (3 lines)\n- **EXAMPLES** (5 lines)\n- **SEE ALSO** (21 lines)\n\n## Full Content\n\n### NAME\n\nvgimportclone - Import a VG from cloned PVs\n\n### SYNOPSIS\n\nvgimportclone positionargs\n[ optionargs ]\n\n### DESCRIPTION\n\nvgimportclone imports a VG from duplicated PVs, e.g. created by a hardware snapshot of exist‐\ning PVs.\n\nA duplicated VG cannot used until it is made to coexist with the original  VG.  vgimportclone\nrenames the VG associated with the specified PVs and changes the associated VG and PV UUIDs.\n\n### USAGE\n\nvgimportclone PV ...\n[ -n|--basevgname VG ]\n[ -i|--import ]\n[ COMMONOPTIONS ]\n\nCommon options for lvm:\n[ -d|--debug ]\n[ -h|--help ]\n[ -q|--quiet ]\n[ -t|--test ]\n[ -v|--verbose ]\n[ -y|--yes ]\n[    --commandprofile String ]\n[    --config String ]\n[    --driverloaded y|n ]\n[    --lockopt String ]\n[    --longhelp ]\n[    --nolocking ]\n[    --profile String ]\n[    --version ]\n\n### OPTIONS\n\n#### -n --basevgname\n\nBy default the snapshot VG will be renamed to the original name plus a numeric suffix\nto avoid duplicate naming (e.g. 'testvg' would be renamed to 'testvg1'). This option\nwill override the base VG name that is used for all VG renames. If a VG already exists\nwith the specified name a numeric suffix will be added (like the previous example) to\nmake it unique.\n\n--commandprofile String\nThe command profile to use for command configuration.  See lvm.conf(5) for more infor‐\nmation about profiles.\n\n--config String\nConfig settings for the command. These override lvm.conf settings.  The String arg\nuses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)\nfor more information about config.\n\n#### -d --debug\n\nSet debug level. Repeat from 1 to 6 times to increase the detail of messages sent to\nthe log file and/or syslog (if configured).\n\n--driverloaded y|n\nIf set to no, the command will not attempt to use device-mapper.  For testing and de‐\nbugging.\n\n#### -h --help\n\nDisplay help text.\n\n#### -i --import\n\nImport exported VGs. Otherwise VGs that have been exported will not be changed (nor\nwill their associated PVs).\n\n--lockopt String\nUsed to pass options for special cases to lvmlockd.  See lvmlockd(8) for more informa‐\ntion.\n\n#### --longhelp\n\nDisplay long help text.\n\n#### --nolocking\n\nDisable locking.\n\n--profile String\nAn alias for --commandprofile or --metadataprofile, depending on the command.\n\n#### -q --quiet\n\nSuppress output and log messages. Overrides --debug and --verbose.  Repeat once to\nalso suppress any prompts with answer 'no'.\n\n#### -t --test\n\nRun in test mode. Commands will not update metadata.  This is implemented by disabling\nall metadata writing but nevertheless returning success to the calling function. This\nmay lead to unusual error messages in multi-stage operations if a tool relies on read‐\ning back metadata it believes has changed but hasn't.\n\n#### -v --verbose\n\nSet verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to\nstdout and stderr.\n\n#### --version\n\nDisplay version information.\n\n#### -y --yes\n\nDo not prompt for confirmation interactively but always assume the answer yes. Use\nwith extreme caution.  (For automatic no, see -qq.)\n\n### VARIABLES\n\nPV\nPhysical Volume name, a device path under /dev.  For commands  managing  physical  ex‐\ntents,  a PV positional arg generally accepts a suffix indicating a range (or multiple\nranges) of physical extents (PEs). When the first PE is omitted, it  defaults  to  the\nstart  of  the  device, and when the last PE is omitted it defaults to end.  Start and\nend range (inclusive): PV[:PE-PE]...   Start  and  length  range  (counting  from  0):\nPV[:PE+PE]...\n\nString\nSee the option description for information about the string content.\n\nSize[UNIT]\nSize is an input number that accepts an optional unit.  Input units are always treated\nas base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.\nThe  default  input  unit  is specified by letter, followed by |UNIT.  UNIT represents\nother possible input units: bBsSkKmMgGtTpPeE.  b|B is bytes, s|S  is  sectors  of  512\nbytes,  k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.  (This\nshould not be confused with the output control --units,  where  capital  letters  mean\nmultiple of 1000.)\n\n### ENVIRONMENT VARIABLES\n\nSee lvm(8) for information about environment variables used by lvm.  For example, LVMVGNAME\ncan generally be substituted for a required VG parameter.\n\n### EXAMPLES\n\nAn original VG \"vg00\" has PVs \"/dev/sda\" and \"/dev/sdb\".  The corresponding PVs from a  hard‐\nware  snapshot  are  \"/dev/sdc\" and \"/dev/sdd\".  Rename the VG associated with \"/dev/sdc\" and\n\"/dev/sdd\" from \"vg00\" to \"vg00snap\" (and change associated UUIDs).\nvgimportclone --basevgname vg00snap /dev/sdc /dev/sdd\n\n### SEE ALSO\n\nlvm(8) lvm.conf(5) lvmconfig(8)\n\npvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)  pvresize(8)  pvs(8)  pvs‐‐\ncan(8)\n\nvgcfgbackup(8)  vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8) vg‐‐\nexport(8) vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8)  vgre‐‐\nmove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)\n\nlvcreate(8)  lvchange(8)  lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8) lvremove(8) lvre‐‐\nname(8) lvresize(8) lvs(8) lvscan(8)\n\nlvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)\n\ndmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)\n\nlvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)\n\n\n\nRed Hat, Inc.                     LVM TOOLS 2.03.11(2) (2021-01-08)                 VGIMPORTCLONE(8)\n\n"
        }
    ],
    "structuredContent": {
        "command": "vgimportclone",
        "section": "8",
        "mode": "man",
        "summary": "vgimportclone - Import a VG from cloned PVs",
        "synopsis": "vgimportclone positionargs\n[ optionargs ]",
        "flags": [
            {
                "flag": "-n",
                "long": "--basevgname",
                "arg": null,
                "description": "By default the snapshot VG will be renamed to the original name plus a numeric suffix to avoid duplicate naming (e.g. 'testvg' would be renamed to 'testvg1'). This option will override the base VG name that is used for all VG renames. If a VG already exists with the specified name a numeric suffix will be added (like the previous example) to make it unique. --commandprofile String The command profile to use for command configuration. See lvm.conf(5) for more infor‐ mation about profiles. --config String Config settings for the command. These override lvm.conf settings. The String arg uses the same format as lvm.conf, or may use section/field syntax. See lvm.conf(5) for more information about config."
            },
            {
                "flag": "-d",
                "long": "--debug",
                "arg": null,
                "description": "Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). --driverloaded y|n If set to no, the command will not attempt to use device-mapper. For testing and de‐ bugging."
            },
            {
                "flag": "-h",
                "long": "--help",
                "arg": null,
                "description": "Display help text."
            },
            {
                "flag": "-i",
                "long": "--import",
                "arg": null,
                "description": "Import exported VGs. Otherwise VGs that have been exported will not be changed (nor will their associated PVs). --lockopt String Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more informa‐ tion."
            },
            {
                "flag": "",
                "long": "--longhelp",
                "arg": null,
                "description": "Display long help text."
            },
            {
                "flag": "",
                "long": "--nolocking",
                "arg": null,
                "description": "Disable locking. --profile String An alias for --commandprofile or --metadataprofile, depending on the command."
            },
            {
                "flag": "-q",
                "long": "--quiet",
                "arg": null,
                "description": "Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer 'no'."
            },
            {
                "flag": "-t",
                "long": "--test",
                "arg": null,
                "description": "Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on read‐ ing back metadata it believes has changed but hasn't."
            },
            {
                "flag": "-v",
                "long": "--verbose",
                "arg": null,
                "description": "Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr."
            },
            {
                "flag": "",
                "long": "--version",
                "arg": null,
                "description": "Display version information."
            },
            {
                "flag": "-y",
                "long": "--yes",
                "arg": null,
                "description": "Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see -qq.)"
            }
        ],
        "examples": [
            "An original VG \"vg00\" has PVs \"/dev/sda\" and \"/dev/sdb\".  The corresponding PVs from a  hard‐",
            "ware  snapshot  are  \"/dev/sdc\" and \"/dev/sdd\".  Rename the VG associated with \"/dev/sdc\" and",
            "\"/dev/sdd\" from \"vg00\" to \"vg00snap\" (and change associated UUIDs).",
            "vgimportclone --basevgname vg00snap /dev/sdc /dev/sdd"
        ],
        "see_also": [
            {
                "name": "lvm",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvm/8/json"
            },
            {
                "name": "lvm.conf",
                "section": "5",
                "url": "https://www.chedong.com/phpMan.php/man/lvm.conf/5/json"
            },
            {
                "name": "lvmconfig",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmconfig/8/json"
            },
            {
                "name": "pvchange",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvchange/8/json"
            },
            {
                "name": "pvck",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvck/8/json"
            },
            {
                "name": "pvcreate",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvcreate/8/json"
            },
            {
                "name": "pvdisplay",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvdisplay/8/json"
            },
            {
                "name": "pvmove",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvmove/8/json"
            },
            {
                "name": "pvremove",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvremove/8/json"
            },
            {
                "name": "pvresize",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvresize/8/json"
            },
            {
                "name": "pvs",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvs/8/json"
            },
            {
                "name": "can",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/can/8/json"
            },
            {
                "name": "vgcfgbackup",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgcfgbackup/8/json"
            },
            {
                "name": "vgcfgrestore",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgcfgrestore/8/json"
            },
            {
                "name": "vgchange",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgchange/8/json"
            },
            {
                "name": "vgck",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgck/8/json"
            },
            {
                "name": "vgcreate",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgcreate/8/json"
            },
            {
                "name": "vgconvert",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgconvert/8/json"
            },
            {
                "name": "vgdisplay",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgdisplay/8/json"
            },
            {
                "name": "export",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/export/8/json"
            },
            {
                "name": "vgextend",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgextend/8/json"
            },
            {
                "name": "vgimport",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgimport/8/json"
            },
            {
                "name": "vgmerge",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgmerge/8/json"
            },
            {
                "name": "vgmknodes",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgmknodes/8/json"
            },
            {
                "name": "vgreduce",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgreduce/8/json"
            },
            {
                "name": "move",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/move/8/json"
            },
            {
                "name": "vgrename",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgrename/8/json"
            },
            {
                "name": "vgs",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgs/8/json"
            },
            {
                "name": "vgscan",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgscan/8/json"
            },
            {
                "name": "vgsplit",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgsplit/8/json"
            },
            {
                "name": "lvcreate",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvcreate/8/json"
            },
            {
                "name": "lvchange",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvchange/8/json"
            },
            {
                "name": "lvconvert",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvconvert/8/json"
            },
            {
                "name": "lvdisplay",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvdisplay/8/json"
            },
            {
                "name": "lvextend",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvextend/8/json"
            },
            {
                "name": "lvreduce",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvreduce/8/json"
            },
            {
                "name": "lvremove",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvremove/8/json"
            },
            {
                "name": "name",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/name/8/json"
            },
            {
                "name": "lvresize",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvresize/8/json"
            },
            {
                "name": "lvs",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvs/8/json"
            },
            {
                "name": "lvscan",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvscan/8/json"
            },
            {
                "name": "lvm-fullreport",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvm-fullreport/8/json"
            },
            {
                "name": "lvm-lvpoll",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvm-lvpoll/8/json"
            },
            {
                "name": "lvm2-activation-generator",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvm2-activation-generator/8/json"
            },
            {
                "name": "blkdeactivate",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/blkdeactivate/8/json"
            },
            {
                "name": "lvmdump",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmdump/8/json"
            },
            {
                "name": "dmeventd",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/dmeventd/8/json"
            },
            {
                "name": "lvmpolld",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmpolld/8/json"
            },
            {
                "name": "lvmlockd",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmlockd/8/json"
            },
            {
                "name": "lvmlockctl",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmlockctl/8/json"
            },
            {
                "name": "cmirrord",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/cmirrord/8/json"
            },
            {
                "name": "lvmdbusd",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmdbusd/8/json"
            },
            {
                "name": "lvmsystemid",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmsystemid/7/json"
            },
            {
                "name": "lvmreport",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmreport/7/json"
            },
            {
                "name": "lvmraid",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmraid/7/json"
            },
            {
                "name": "lvmthin",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmthin/7/json"
            },
            {
                "name": "lvmcache",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmcache/7/json"
            }
        ],
        "section_outline": [
            {
                "name": "NAME",
                "lines": 2,
                "subsections": []
            },
            {
                "name": "SYNOPSIS",
                "lines": 3,
                "subsections": []
            },
            {
                "name": "DESCRIPTION",
                "lines": 6,
                "subsections": []
            },
            {
                "name": "USAGE",
                "lines": 21,
                "subsections": []
            },
            {
                "name": "OPTIONS",
                "lines": 1,
                "subsections": [
                    {
                        "name": "-n --basevgname",
                        "lines": 15,
                        "flag": "-n",
                        "long": "--basevgname"
                    },
                    {
                        "name": "-d --debug",
                        "lines": 7,
                        "flag": "-d",
                        "long": "--debug"
                    },
                    {
                        "name": "-h --help",
                        "lines": 2,
                        "flag": "-h",
                        "long": "--help"
                    },
                    {
                        "name": "-i --import",
                        "lines": 7,
                        "flag": "-i",
                        "long": "--import"
                    },
                    {
                        "name": "--longhelp",
                        "lines": 2,
                        "long": "--longhelp"
                    },
                    {
                        "name": "--nolocking",
                        "lines": 5,
                        "long": "--nolocking"
                    },
                    {
                        "name": "-q --quiet",
                        "lines": 3,
                        "flag": "-q",
                        "long": "--quiet"
                    },
                    {
                        "name": "-t --test",
                        "lines": 5,
                        "flag": "-t",
                        "long": "--test"
                    },
                    {
                        "name": "-v --verbose",
                        "lines": 3,
                        "flag": "-v",
                        "long": "--verbose"
                    },
                    {
                        "name": "--version",
                        "lines": 2,
                        "long": "--version"
                    },
                    {
                        "name": "-y --yes",
                        "lines": 3,
                        "flag": "-y",
                        "long": "--yes"
                    }
                ]
            },
            {
                "name": "VARIABLES",
                "lines": 20,
                "subsections": []
            },
            {
                "name": "ENVIRONMENT VARIABLES",
                "lines": 3,
                "subsections": []
            },
            {
                "name": "EXAMPLES",
                "lines": 5,
                "subsections": []
            },
            {
                "name": "SEE ALSO",
                "lines": 21,
                "subsections": []
            }
        ]
    }
}