# vdso(7) - man - phpMan [VDSO(7)](https://www.chedong.com/phpMan.php/man/VDSO/7/markdown) Linux Programmer's Manual [VDSO(7)](https://www.chedong.com/phpMan.php/man/VDSO/7/markdown) ## NAME vdso - overview of the virtual ELF dynamic shared object ## SYNOPSIS ### #include **void** ***vdso** **=** **(uintptr**___**t)** **getauxval(AT**___**SYSINFO**___**EHDR);** ## DESCRIPTION The "vDSO" (virtual dynamic shared object) is a small shared library that the kernel automat‐ ically maps into the address space of all user-space applications. Applications usually do not need to concern themselves with these details as the vDSO is most commonly called by the C library. This way you can code in the normal way using standard functions and the C li‐ brary will take care of using any functionality that is available via the vDSO. Why does the vDSO exist at all? There are some system calls the kernel provides that user- space code ends up using frequently, to the point that such calls can dominate overall per‐ formance. This is due both to the frequency of the call as well as the context-switch over‐ head that results from exiting user space and entering the kernel. The rest of this documentation is geared toward the curious and/or C library writers rather than general developers. If you're trying to call the vDSO in your own application rather than using the C library, you're most likely doing it wrong. ### Example background Making system calls can be slow. In x86 32-bit systems, you can trigger a software interrupt (_int_ _$0x80_) to tell the kernel you wish to make a system call. However, this instruction is expensive: it goes through the full interrupt-handling paths in the processor's microcode as well as in the kernel. Newer processors have faster (but backward incompatible) instructions to initiate system calls. Rather than require the C library to figure out if this function‐ ality is available at run time, the C library can use functions provided by the kernel in the vDSO. Note that the terminology can be confusing. On x86 systems, the vDSO function used to deter‐ mine the preferred method of making a system call is named "__kernel_vsyscall", but on x86-64, the term "vsyscall" also refers to an obsolete way to ask the kernel what time it is or what CPU the caller is on. One frequently used system call is [**gettimeofday**(2)](https://www.chedong.com/phpMan.php/man/gettimeofday/2/markdown). This system call is called both directly by user-space applications as well as indirectly by the C library. Think timestamps or tim‐ ing loops or polling—all of these frequently need to know what time it is right now. This information is also not secret—any application in any privilege mode (root or any unprivi‐ leged user) will get the same answer. Thus the kernel arranges for the information required to answer this question to be placed in memory the process can access. Now a call to **get**‐‐ [**timeofday**(2)](https://www.chedong.com/phpMan.php/man/timeofday/2/markdown) changes from a system call to a normal function call and a few memory accesses. ### Finding the vDSO The base address of the vDSO (if one exists) is passed by the kernel to each program in the initial auxiliary vector (see [**getauxval**(3)](https://www.chedong.com/phpMan.php/man/getauxval/3/markdown)), via the **AT**___**SYSINFO**___**EHDR** tag. You must not assume the vDSO is mapped at any particular location in the user's memory map. The base address will usually be randomized at run time every time a new process image is created (at [**execve**(2)](https://www.chedong.com/phpMan.php/man/execve/2/markdown) time). This is done for security reasons, to prevent "return-to-libc" attacks. For some architectures, there is also an **AT**___**SYSINFO** tag. This is used only for locating the vsyscall entry point and is frequently omitted or set to 0 (meaning it's not available). This tag is a throwback to the initial vDSO work (see _History_ below) and its use should be avoided. ### File format Since the vDSO is a fully formed ELF image, you can do symbol lookups on it. This allows new symbols to be added with newer kernel releases, and allows the C library to detect available functionality at run time when running under different kernel versions. Oftentimes the C li‐ brary will do detection with the first call and then cache the result for subsequent calls. All symbols are also versioned (using the GNU version format). This allows the kernel to up‐ date the function signature without breaking backward compatibility. This means changing the arguments that the function accepts as well as the return value. Thus, when looking up a symbol in the vDSO, you must always include the version to match the ABI you expect. Typically the vDSO follows the naming convention of prefixing all symbols with "__vdso_" or "__kernel_" so as to distinguish them from other standard symbols. For example, the "get‐ timeofday" function is named "__vdso_gettimeofday". You use the standard C calling conventions when calling any of these functions. No need to worry about weird register or stack behavior. ## NOTES ### Source When you compile the kernel, it will automatically compile and link the vDSO code for you. You will frequently find it under the architecture-specific directory: find arch/$ARCH/ -name '*vdso*.so*' -o -name '*gate*.so*' ### vDSO names The name of the vDSO varies across architectures. It will often show up in things like glibc's [**ldd**(1)](https://www.chedong.com/phpMan.php/man/ldd/1/markdown) output. The exact name should not matter to any code, so do not hardcode it. user ABI vDSO name ───────────────────────────── aarch64 linux-vdso.so.1 arm linux-vdso.so.1 ia64 linux-gate.so.1 mips linux-vdso.so.1 ppc/32 linux-vdso32.so.1 ppc/64 linux-vdso64.so.1 riscv linux-vdso.so.1 s390 linux-vdso32.so.1 s390x linux-vdso64.so.1 sh linux-gate.so.1 i386 linux-gate.so.1 x86-64 linux-vdso.so.1 x86/x32 linux-vdso.so.1 ### [strace(1)](https://www.chedong.com/phpMan.php/man/strace/1/markdown), [seccomp(2)](https://www.chedong.com/phpMan.php/man/seccomp/2/markdown), and the vDSO When tracing systems calls with [**strace**(1)](https://www.chedong.com/phpMan.php/man/strace/1/markdown), symbols (system calls) that are exported by the vDSO will _not_ appear in the trace output. Those system calls will likewise not be visible to [**seccomp**(2)](https://www.chedong.com/phpMan.php/man/seccomp/2/markdown) filters. ## ARCHITECTURE-SPECIFIC NOTES The subsections below provide architecture-specific notes on the vDSO. Note that the vDSO that is used is based on the ABI of your user-space code and not the ABI of the kernel. Thus, for example, when you run an i386 32-bit ELF binary, you'll get the same vDSO regardless of whether you run it under an i386 32-bit kernel or under an x86-64 64-bit kernel. Therefore, the name of the user-space ABI should be used to determine which of the sections below is relevant. ### ARM functions The table below lists the symbols exported by the vDSO. symbol version ──────────────────────────────────────────────────────────── __vdso_gettimeofday LINUX_2.6 (exported since Linux 4.1) __vdso_clock_gettime LINUX_2.6 (exported since Linux 4.1) Additionally, the ARM port has a code page full of utility functions. Since it's just a raw page of code, there is no ELF information for doing symbol lookups or versioning. It does provide support for different versions though. For information on this code page, it's best to refer to the kernel documentation as it's ex‐ tremely detailed and covers everything you need to know: _Documentation/arm/ker__‐ _nel_user_helpers.txt_. ### aarch64 functions The table below lists the symbols exported by the vDSO. symbol version ────────────────────────────────────── __kernel_rt_sigreturn LINUX_2.6.39 __kernel_gettimeofday LINUX_2.6.39 __kernel_clock_gettime LINUX_2.6.39 __kernel_clock_getres LINUX_2.6.39 ### bfin (Blackfin) functions (port removed in Linux 4.17) As this CPU lacks a memory management unit (MMU), it doesn't set up a vDSO in the normal sense. Instead, it maps at boot time a few raw functions into a fixed location in memory. User-space applications then call directly into that region. There is no provision for back‐ ward compatibility beyond sniffing raw opcodes, but as this is an embedded CPU, it can get away with things—some of the object formats it runs aren't even ELF based (they're bFLT/FLAT). For information on this code page, it's best to refer to the public documentation: ### mips functions The table below lists the symbols exported by the vDSO. symbol version ────────────────────────────────────────────────────────────── __kernel_gettimeofday LINUX_2.6 (exported since Linux 4.4) __kernel_clock_gettime LINUX_2.6 (exported since Linux 4.4) ### ia64 (Itanium) functions The table below lists the symbols exported by the vDSO. symbol version ─────────────────────────────────────── __kernel_sigtramp LINUX_2.5 __kernel_syscall_via_break LINUX_2.5 __kernel_syscall_via_epc LINUX_2.5 The Itanium port is somewhat tricky. In addition to the vDSO above, it also has "light- weight system calls" (also known as "fast syscalls" or "fsys"). You can invoke these via the ___kernel_syscall_via_epc_ vDSO helper. The system calls listed here have the same semantics as if you called them directly via [**syscall**(2)](https://www.chedong.com/phpMan.php/man/syscall/2/markdown), so refer to the relevant documentation for each. The table below lists the functions available via this mechanism. function ──────────────── clock_gettime getcpu getpid getppid gettimeofday set_tid_address ### parisc (hppa) functions The parisc port has a code page with utility functions called a gateway page. Rather than use the normal ELF auxiliary vector approach, it passes the address of the page to the process via the SR2 register. The permissions on the page are such that merely executing those addresses automatically executes with kernel privileges and not in user space. This is done to match the way HP-UX works. Since it's just a raw page of code, there is no ELF information for doing symbol lookups or versioning. Simply call into the appropriate offset via the branch instruction, for example: ble (%sr2, %r0) offset function ──────────────────────────────────────────── 00b0 lws_entry (CAS operations) 00e0 set_thread_pointer (used by glibc) 0100 linux_gateway_entry (syscall) ### ppc/32 functions The table below lists the symbols exported by the vDSO. The functions marked with a _*_ are available only when the kernel is a PowerPC64 (64-bit) kernel. symbol version ──────────────────────────────────────── __kernel_clock_getres LINUX_2.6.15 __kernel_clock_gettime LINUX_2.6.15 __kernel_datapage_offset LINUX_2.6.15 __kernel_get_syscall_map LINUX_2.6.15 __kernel_get_tbfreq LINUX_2.6.15 __kernel_getcpu _*_ LINUX_2.6.15 __kernel_gettimeofday LINUX_2.6.15 __kernel_sigtramp_rt32 LINUX_2.6.15 __kernel_sigtramp32 LINUX_2.6.15 __kernel_sync_dicache LINUX_2.6.15 __kernel_sync_dicache_p5 LINUX_2.6.15 The **CLOCK**___**REALTIME**___**COARSE** and **CLOCK**___**MONOTONIC**___**COARSE** clocks are _not_ supported by the ___ker__‐ _nel_clock_getres_ and ___kernel_clock_gettime_ interfaces; the kernel falls back to the real system call. ### ppc/64 functions The table below lists the symbols exported by the vDSO. symbol version ──────────────────────────────────────── __kernel_clock_getres LINUX_2.6.15 __kernel_clock_gettime LINUX_2.6.15 __kernel_datapage_offset LINUX_2.6.15 __kernel_get_syscall_map LINUX_2.6.15 __kernel_get_tbfreq LINUX_2.6.15 __kernel_getcpu LINUX_2.6.15 __kernel_gettimeofday LINUX_2.6.15 __kernel_sigtramp_rt64 LINUX_2.6.15 __kernel_sync_dicache LINUX_2.6.15 __kernel_sync_dicache_p5 LINUX_2.6.15 The **CLOCK**___**REALTIME**___**COARSE** and **CLOCK**___**MONOTONIC**___**COARSE** clocks are _not_ supported by the ___ker__‐ _nel_clock_getres_ and ___kernel_clock_gettime_ interfaces; the kernel falls back to the real system call. ### riscv functions The table below lists the symbols exported by the vDSO. symbol version ──────────────────────────────────── __kernel_rt_sigreturn LINUX_4.15 __kernel_gettimeofday LINUX_4.15 __kernel_clock_gettime LINUX_4.15 __kernel_clock_getres LINUX_4.15 __kernel_getcpu LINUX_4.15 __kernel_flush_icache LINUX_4.15 ### s390 functions The table below lists the symbols exported by the vDSO. symbol version ────────────────────────────────────── __kernel_clock_getres LINUX_2.6.29 __kernel_clock_gettime LINUX_2.6.29 __kernel_gettimeofday LINUX_2.6.29 ### s390x functions The table below lists the symbols exported by the vDSO. symbol version ────────────────────────────────────── __kernel_clock_getres LINUX_2.6.29 __kernel_clock_gettime LINUX_2.6.29 __kernel_gettimeofday LINUX_2.6.29 ### sh (SuperH) functions The table below lists the symbols exported by the vDSO. symbol version ────────────────────────────────── __kernel_rt_sigreturn LINUX_2.6 __kernel_sigreturn LINUX_2.6 __kernel_vsyscall LINUX_2.6 ### i386 functions The table below lists the symbols exported by the vDSO. symbol version ────────────────────────────────────────────────────────────── __kernel_sigreturn LINUX_2.5 __kernel_rt_sigreturn LINUX_2.5 __kernel_vsyscall LINUX_2.5 __vdso_clock_gettime LINUX_2.6 (exported since Linux 3.15) __vdso_gettimeofday LINUX_2.6 (exported since Linux 3.15) __vdso_time LINUX_2.6 (exported since Linux 3.15) ### x86-64 functions The table below lists the symbols exported by the vDSO. All of these symbols are also avail‐ able without the "__vdso_" prefix, but you should ignore those and stick to the names below. symbol version ───────────────────────────────── __vdso_clock_gettime LINUX_2.6 __vdso_getcpu LINUX_2.6 __vdso_gettimeofday LINUX_2.6 __vdso_time LINUX_2.6 ### x86/x32 functions The table below lists the symbols exported by the vDSO. symbol version ───────────────────────────────── __vdso_clock_gettime LINUX_2.6 __vdso_getcpu LINUX_2.6 __vdso_gettimeofday LINUX_2.6 __vdso_time LINUX_2.6 ### History The vDSO was originally just a single function—the vsyscall. In older kernels, you might see that name in a process's memory map rather than "vdso". Over time, people realized that this mechanism was a great way to pass more functionality to user space, so it was reconceived as a vDSO in the current format. ## SEE ALSO [**syscalls**(2)](https://www.chedong.com/phpMan.php/man/syscalls/2/markdown), [**getauxval**(3)](https://www.chedong.com/phpMan.php/man/getauxval/3/markdown), [**proc**(5)](https://www.chedong.com/phpMan.php/man/proc/5/markdown) The documents, examples, and source code in the Linux source code tree: Documentation/ABI/stable/vdso Documentation/ia64/fsys.txt Documentation/vDSO/* (includes examples of using the vDSO) find arch/ -iname '*vdso*' -o -iname '*gate*' ## COLOPHON This page is part of release 5.10 of the Linux _man-pages_ project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at . Linux 2019-08-02 [VDSO(7)](https://www.chedong.com/phpMan.php/man/VDSO/7/markdown)