{ "content": [ { "type": "text", "text": "# tc(8) (man)\n\n**Summary:** tc - show / manipulate traffic control settings\n\n**Synopsis:** tc [ OPTIONS ] qdisc [ add | change | replace | link | delete ] dev DEV [ parent qdisc-id |\nroot ] [ handle qdisc-id ] [ ingressblock BLOCKINDEX ] [ egressblock BLOCKINDEX ] qdisc [\nqdisc specific parameters ]\ntc [ OPTIONS ] class [ add | change | replace | delete ] dev DEV parent qdisc-id [ classid\nclass-id ] qdisc [ qdisc specific parameters ]\ntc [ OPTIONS ] filter [ add | change | replace | delete | get ] dev DEV [ parent qdisc-id |\nroot ] [ handle filter-id ] protocol protocol prio priority filtertype [ filtertype specific\nparameters ] flowid flow-id\ntc [ OPTIONS ] filter [ add | change | replace | delete | get ] block BLOCKINDEX [ handle\nfilter-id ] protocol protocol prio priority filtertype [ filtertype specific parameters ]\nflowid flow-id\ntc [ OPTIONS ] chain [ add | delete | get ] dev DEV [ parent qdisc-id | root ] filtertype [\nfiltertype specific parameters ]\ntc [ OPTIONS ] chain [ add | delete | get ] block BLOCKINDEX filtertype [ filtertype spe‐\ncific parameters ]\ntc [ OPTIONS ] [ FORMAT ] qdisc { show | list } [ dev DEV ] [ root | ingress | handle QHANDLE\n| parent CLASSID ] [ invisible ]\ntc [ OPTIONS ] [ FORMAT ] class show dev DEV\ntc [ OPTIONS ] filter show dev DEV\ntc [ OPTIONS ] filter show block BLOCKINDEX\ntc [ OPTIONS ] chain show dev DEV\ntc [ OPTIONS ] chain show block BLOCKINDEX\ntc [ OPTIONS ] monitor [ file FILENAME ]\nOPTIONS := { [ -force ] -b[atch] [ filename ] | [ -n[etns] name ] | [ -N[umeric] ] | [ -nm |\n\n## Flags\n\n| Flag | Long | Arg | Description |\n|------|------|-----|-------------|\n| -b | — | — | read commands from provided file or standard input and invoke them. First failure will cause termination of tc. |\n| — | — | — | of the commands, the application return code will be non zero. |\n| -o | — | — | output each record on a single line, replacing line feeds with the '\\' character. This is convenient when you want to co |\n| -n | — | — | switches tc to the specified network namespace NETNS. Actually it just simplifies ex‐ ecuting of: ip netns exec NETNS tc |\n| -N | — | — | Print the number of protocol, scope, dsfield, etc directly instead of converting it to human readable name. |\n| — | — | — | specifies path to the config file. This option is used in conjunction with other op‐ tions (e.g. -nm). |\n| -t | — | — | When tc monitor runs, print timestamp before the event message in format: Timestamp:
--
T.] |\n\n## Examples\n\n- `tc -g class show dev eth0`\n- `Shows classes as ASCII graph on eth0 interface.`\n- `tc -g -s class show dev eth0`\n- `Shows classes as ASCII graph with stats info under each class.`\n\n## See Also\n\n- tc-basic(8)\n- tc-bfifo(8)\n- tc-bpf(8)\n- tc-cake(8)\n- tc-cbq(8)\n- tc-cgroup(8)\n- tc-choke(8)\n- codel(8)\n- tc-drr(8)\n- tc-ematch(8)\n- tc-ets(8)\n- tc-flow(8)\n- tc-flower(8)\n- tc-fq(8)\n- fqcodel(8)\n- tc-fqpie(8)\n- tc-fw(8)\n- tc-hfsc(7)\n- tc-hfsc(8)\n- tc-htb(8)\n- tc-mqprio(8)\n- pfifo(8)\n- tc-pfifofast(8)\n- tc-pie(8)\n- tc-red(8)\n- tc-route(8)\n- tc-sfb(8)\n- tc-sfq(8)\n- stab(8)\n- tc-tbf(8)\n- tc-tcindex(8)\n- tc-u32(8)\n\n## Section Outline\n\n- **NAME** (2 lines)\n- **SYNOPSIS** (40 lines) — 2 subsections\n - -nam -cf -c -t -t -o (3 lines)\n - -col (1 lines)\n- **DESCRIPTION** (29 lines)\n- **QDISCS** (10 lines)\n- **CLASSES** (7 lines)\n- **FILTERS** (38 lines)\n- **QEVENTS** (13 lines)\n- **CLASSLESS QDISCS** (83 lines)\n- **CONFIGURING CLASSLESS QDISCS** (12 lines)\n- **CLASSFUL QDISCS** (42 lines)\n- **THEORY OF OPERATION** (33 lines)\n- **NAMING** (25 lines)\n- **PARAMETERS** (88 lines)\n- **TC COMMANDS** (34 lines)\n- **MONITOR** (10 lines)\n- **OPTIONS** (1 lines) — 8 subsections\n - -b -b -batch -batch (4 lines)\n - -force (3 lines)\n - -o -oneline (4 lines)\n - -n -net -netns (10 lines)\n - -N -Numeric (4 lines)\n - -cf -conf (4 lines)\n - -t -timestamp (4 lines)\n - -ts -tshort (4 lines)\n- **FORMAT** (3 lines) — 10 subsections\n - -s -stats -statistics (3 lines)\n - -d -details (3 lines)\n - -r -raw (3 lines)\n - -p -pretty (4 lines)\n - -iec (1 lines)\n - -g -graph (4 lines)\n - -c (7 lines)\n - -j -json (3 lines)\n - -nm -name (13 lines)\n - -br -brief (5 lines)\n- **EXAMPLES** (7 lines)\n- **HISTORY** (2 lines)\n- **SEE ALSO** (6 lines) — 1 subsections\n - dev@vger.kernel.org> (1 lines)\n- **AUTHOR** (5 lines)\n\n## Full Content\n\n### NAME\n\ntc - show / manipulate traffic control settings\n\n### SYNOPSIS\n\ntc [ OPTIONS ] qdisc [ add | change | replace | link | delete ] dev DEV [ parent qdisc-id |\nroot ] [ handle qdisc-id ] [ ingressblock BLOCKINDEX ] [ egressblock BLOCKINDEX ] qdisc [\nqdisc specific parameters ]\n\ntc [ OPTIONS ] class [ add | change | replace | delete ] dev DEV parent qdisc-id [ classid\nclass-id ] qdisc [ qdisc specific parameters ]\n\ntc [ OPTIONS ] filter [ add | change | replace | delete | get ] dev DEV [ parent qdisc-id |\nroot ] [ handle filter-id ] protocol protocol prio priority filtertype [ filtertype specific\nparameters ] flowid flow-id\n\ntc [ OPTIONS ] filter [ add | change | replace | delete | get ] block BLOCKINDEX [ handle\nfilter-id ] protocol protocol prio priority filtertype [ filtertype specific parameters ]\nflowid flow-id\n\ntc [ OPTIONS ] chain [ add | delete | get ] dev DEV [ parent qdisc-id | root ] filtertype [\nfiltertype specific parameters ]\n\ntc [ OPTIONS ] chain [ add | delete | get ] block BLOCKINDEX filtertype [ filtertype spe‐\ncific parameters ]\n\n\ntc [ OPTIONS ] [ FORMAT ] qdisc { show | list } [ dev DEV ] [ root | ingress | handle QHANDLE\n| parent CLASSID ] [ invisible ]\n\ntc [ OPTIONS ] [ FORMAT ] class show dev DEV\n\ntc [ OPTIONS ] filter show dev DEV\n\ntc [ OPTIONS ] filter show block BLOCKINDEX\n\ntc [ OPTIONS ] chain show dev DEV\n\ntc [ OPTIONS ] chain show block BLOCKINDEX\n\n\ntc [ OPTIONS ] monitor [ file FILENAME ]\n\n\nOPTIONS := { [ -force ] -b[atch] [ filename ] | [ -n[etns] name ] | [ -N[umeric] ] | [ -nm |\n\n#### -nam -cf -c -t -t -o\n\n] }\n\nFORMAT := { -s[tatistics] | -d[etails] | -r[aw] | -i[ec] | -g[raph] | -j[json] | -p[retty] |\n\n#### -col\n\n### DESCRIPTION\n\nTc is used to configure Traffic Control in the Linux kernel. Traffic Control consists of the\nfollowing:\n\n\nSHAPING\nWhen traffic is shaped, its rate of transmission is under control. Shaping may be more\nthan lowering the available bandwidth - it is also used to smooth out bursts in traf‐\nfic for better network behaviour. Shaping occurs on egress.\n\n\nSCHEDULING\nBy scheduling the transmission of packets it is possible to improve interactivity for\ntraffic that needs it while still guaranteeing bandwidth to bulk transfers. Reordering\nis also called prioritizing, and happens only on egress.\n\n\nPOLICING\nWhereas shaping deals with transmission of traffic, policing pertains to traffic ar‐\nriving. Policing thus occurs on ingress.\n\n\nDROPPING\nTraffic exceeding a set bandwidth may also be dropped forthwith, both on ingress and\non egress.\n\n\nProcessing of traffic is controlled by three kinds of objects: qdiscs, classes and filters.\n\n### QDISCS\n\nqdisc is short for 'queueing discipline' and it is elementary to understanding traffic con‐\ntrol. Whenever the kernel needs to send a packet to an interface, it is enqueued to the qdisc\nconfigured for that interface. Immediately afterwards, the kernel tries to get as many pack‐\nets as possible from the qdisc, for giving them to the network adaptor driver.\n\nA simple QDISC is the 'pfifo' one, which does no processing at all and is a pure First In,\nFirst Out queue. It does however store traffic when the network interface can't handle it mo‐\nmentarily.\n\n### CLASSES\n\nSome qdiscs can contain classes, which contain further qdiscs - traffic may then be enqueued\nin any of the inner qdiscs, which are within the classes. When the kernel tries to dequeue a\npacket from such a classful qdisc it can come from any of the classes. A qdisc may for exam‐\nple prioritize certain kinds of traffic by trying to dequeue from certain classes before oth‐\ners.\n\n### FILTERS\n\nA filter is used by a classful qdisc to determine in which class a packet will be enqueued.\nWhenever traffic arrives at a class with subclasses, it needs to be classified. Various meth‐\nods may be employed to do so, one of these are the filters. All filters attached to the class\nare called, until one of them returns with a verdict. If no verdict was made, other criteria\nmay be available. This differs per qdisc.\n\nIt is important to notice that filters reside within qdiscs - they are not masters of what\nhappens.\n\nThe available filters are:\n\nbasic Filter packets based on an ematch expression. See tc-ematch(8) for details.\n\nbpf Filter packets using (e)BPF, see tc-bpf(8) for details.\n\ncgroup Filter packets based on the control group of their process. See tc-cgroup(8) for de‐\ntails.\n\nflow, flower\nFlow-based classifiers, filtering packets based on their flow (identified by se‐\nlectable keys). See tc-flow(8) and tc-flower(8) for details.\n\nfw Filter based on fwmark. Directly maps fwmark value to traffic class. See tc-fw(8).\n\nroute Filter packets based on routing table. See tc-route(8) for details.\n\nrsvp Match Resource Reservation Protocol (RSVP) packets.\n\ntcindex\nFilter packets based on traffic control index. See tc-tcindex(8).\n\nu32 Generic filtering on arbitrary packet data, assisted by syntax to abstract common op‐\nerations. See tc-u32(8) for details.\n\nmatchall\nTraffic control filter that matches every packet. See tc-matchall(8) for details.\n\n### QEVENTS\n\nQdiscs may invoke user-configured actions when certain interesting events take place in the\nqdisc. Each qevent can either be unused, or can have a block attached to it. To this block\nare then attached filters using the \"tc block BLOCKIDX\" syntax. The block is executed when\nthe qevent associated with the attachment point takes place. For example, packet could be\ndropped, or delayed, etc., depending on the qdisc and the qevent in question.\n\nFor example:\n\ntc qdisc add dev eth0 root handle 1: red limit 500K avpkt 1K \\\nqevent earlydrop block 10\ntc filter add block 10 matchall action mirred egress mirror dev eth1\n\n### CLASSLESS QDISCS\n\nThe classless qdiscs are:\n\nchoke CHOKe (CHOose and Keep for responsive flows, CHOose and Kill for unresponsive flows)\nis a classless qdisc designed to both identify and penalize flows that monopolize the\nqueue. CHOKe is a variation of RED, and the configuration is similar to RED.\n\ncodel CoDel (pronounced \"coddle\") is an adaptive \"no-knobs\" active queue management algo‐\nrithm (AQM) scheme that was developed to address the shortcomings of RED and its vari‐\nants.\n\n[p|b]fifo\nSimplest usable qdisc, pure First In, First Out behaviour. Limited in packets or in\nbytes.\n\nfq Fair Queue Scheduler realises TCP pacing and scales to millions of concurrent flows\nper qdisc.\n\nfqcodel\nFair Queuing Controlled Delay is queuing discipline that combines Fair Queuing with\nthe CoDel AQM scheme. FQCodel uses a stochastic model to classify incoming packets\ninto different flows and is used to provide a fair share of the bandwidth to all the\nflows using the queue. Each such flow is managed by the CoDel queuing discipline. Re‐\nordering within a flow is avoided since Codel internally uses a FIFO queue.\n\nfqpie FQ-PIE (Flow Queuing with Proportional Integral controller Enhanced) is a queuing dis‐\ncipline that combines Flow Queuing with the PIE AQM scheme. FQ-PIE uses a Jenkins hash\nfunction to classify incoming packets into different flows and is used to provide a\nfair share of the bandwidth to all the flows using the qdisc. Each such flow is man‐\naged by the PIE algorithm.\n\ngred Generalized Random Early Detection combines multiple RED queues in order to achieve\nmultiple drop priorities. This is required to realize Assured Forwarding (RFC 2597).\n\nhhf Heavy-Hitter Filter differentiates between small flows and the opposite, heavy-hit‐\nters. The goal is to catch the heavy-hitters and move them to a separate queue with\nless priority so that bulk traffic does not affect the latency of critical traffic.\n\ningress\nThis is a special qdisc as it applies to incoming traffic on an interface, allowing\nfor it to be filtered and policed.\n\nmqprio The Multiqueue Priority Qdisc is a simple queuing discipline that allows mapping traf‐\nfic flows to hardware queue ranges using priorities and a configurable priority to\ntraffic class mapping. A traffic class in this context is a set of contiguous qdisc\nclasses which map 1:1 to a set of hardware exposed queues.\n\nmultiq Multiqueue is a qdisc optimized for devices with multiple Tx queues. It has been added\nfor hardware that wishes to avoid head-of-line blocking. It will cycle though the\nbands and verify that the hardware queue associated with the band is not stopped prior\nto dequeuing a packet.\n\nnetem Network Emulator is an enhancement of the Linux traffic control facilities that allow\nto add delay, packet loss, duplication and more other characteristics to packets out‐\ngoing from a selected network interface.\n\npfifofast\nStandard qdisc for 'Advanced Router' enabled kernels. Consists of a three-band queue\nwhich honors Type of Service flags, as well as the priority that may be assigned to a\npacket.\n\npie Proportional Integral controller-Enhanced (PIE) is a control theoretic active queue\nmanagement scheme. It is based on the proportional integral controller but aims to\ncontrol delay.\n\nred Random Early Detection simulates physical congestion by randomly dropping packets when\nnearing configured bandwidth allocation. Well suited to very large bandwidth applica‐\ntions.\n\nrr Round-Robin qdisc with support for multiqueue network devices. Removed from Linux\nsince kernel version 2.6.27.\n\nsfb Stochastic Fair Blue is a classless qdisc to manage congestion based on packet loss\nand link utilization history while trying to prevent non-responsive flows (i.e. flows\nthat do not react to congestion marking or dropped packets) from impacting performance\nof responsive flows. Unlike RED, where the marking probability has to be configured,\nBLUE tries to determine the ideal marking probability automatically.\n\nsfq Stochastic Fairness Queueing reorders queued traffic so each 'session' gets to send a\npacket in turn.\n\ntbf The Token Bucket Filter is suited for slowing traffic down to a precisely configured\nrate. Scales well to large bandwidths.\n\n### CONFIGURING CLASSLESS QDISCS\n\nIn the absence of classful qdiscs, classless qdiscs can only be attached at the root of a de‐\nvice. Full syntax:\n\ntc qdisc add dev DEV root QDISC QDISC-PARAMETERS\n\nTo remove, issue\n\ntc qdisc del dev DEV root\n\nThe pfifofast qdisc is the automatic default in the absence of a configured qdisc.\n\n### CLASSFUL QDISCS\n\nThe classful qdiscs are:\n\nATM Map flows to virtual circuits of an underlying asynchronous transfer mode device.\n\nCBQ Class Based Queueing implements a rich linksharing hierarchy of classes. It contains\nshaping elements as well as prioritizing capabilities. Shaping is performed using link\nidle time calculations based on average packet size and underlying link bandwidth. The\nlatter may be ill-defined for some interfaces.\n\nDRR The Deficit Round Robin Scheduler is a more flexible replacement for Stochastic Fair‐\nness Queuing. Unlike SFQ, there are no built-in queues -- you need to add classes and\nthen set up filters to classify packets accordingly. This can be useful e.g. for us‐\ning RED qdiscs with different settings for particular traffic. There is no default\nclass -- if a packet cannot be classified, it is dropped.\n\nDSMARK Classify packets based on TOS field, change TOS field of packets based on classifica‐\ntion.\n\nETS The ETS qdisc is a queuing discipline that merges functionality of PRIO and DRR qdiscs\nin one scheduler. ETS makes it easy to configure a set of strict and bandwidth-sharing\nbands to implement the transmission selection described in 802.1Qaz.\n\nHFSC Hierarchical Fair Service Curve guarantees precise bandwidth and delay allocation for\nleaf classes and allocates excess bandwidth fairly. Unlike HTB, it makes use of packet\ndropping to achieve low delays which interactive sessions benefit from.\n\nHTB The Hierarchy Token Bucket implements a rich linksharing hierarchy of classes with an\nemphasis on conforming to existing practices. HTB facilitates guaranteeing bandwidth\nto classes, while also allowing specification of upper limits to inter-class sharing.\nIt contains shaping elements, based on TBF and can prioritize classes.\n\nPRIO The PRIO qdisc is a non-shaping container for a configurable number of classes which\nare dequeued in order. This allows for easy prioritization of traffic, where lower\nclasses are only able to send if higher ones have no packets available. To facilitate\nconfiguration, Type Of Service bits are honored by default.\n\nQFQ Quick Fair Queueing is an O(1) scheduler that provides near-optimal guarantees, and is\nthe first to achieve that goal with a constant cost also with respect to the number of\ngroups and the packet length. The QFQ algorithm has no loops, and uses very simple in‐\nstructions and data structures that lend themselves very well to a hardware implemen‐\ntation.\n\n### THEORY OF OPERATION\n\nClasses form a tree, where each class has a single parent. A class may have multiple chil‐\ndren. Some qdiscs allow for runtime addition of classes (CBQ, HTB) while others (PRIO) are\ncreated with a static number of children.\n\nQdiscs which allow dynamic addition of classes can have zero or more subclasses to which\ntraffic may be enqueued.\n\nFurthermore, each class contains a leaf qdisc which by default has pfifo behaviour, although\nanother qdisc can be attached in place. This qdisc may again contain classes, but each class\ncan have only one leaf qdisc.\n\nWhen a packet enters a classful qdisc it can be classified to one of the classes within.\nThree criteria are available, although not all qdiscs will use all three:\n\ntc filters\nIf tc filters are attached to a class, they are consulted first for relevant instruc‐\ntions. Filters can match on all fields of a packet header, as well as on the firewall\nmark applied by iptables.\n\nType of Service\nSome qdiscs have built in rules for classifying packets based on the TOS field.\n\nskb->priority\nUserspace programs can encode a class-id in the 'skb->priority' field using the\nSOPRIORITY option.\n\nEach node within the tree can have its own filters but higher level filters may also point\ndirectly to lower classes.\n\nIf classification did not succeed, packets are enqueued to the leaf qdisc attached to that\nclass. Check qdisc specific manpages for details, however.\n\n### NAMING\n\nAll qdiscs, classes and filters have IDs, which can either be specified or be automatically\nassigned.\n\nIDs consist of a major number and a minor number, separated by a colon - major:minor. Both\nmajor and minor are hexadecimal numbers and are limited to 16 bits. There are two special\nvalues: root is signified by major and minor of all ones, and unspecified is all zeros.\n\n\nQDISCS A qdisc, which potentially can have children, gets assigned a major number, called a\n'handle', leaving the minor number namespace available for classes. The handle is ex‐\npressed as '10:'. It is customary to explicitly assign a handle to qdiscs expected to\nhave children.\n\n\nCLASSES\nClasses residing under a qdisc share their qdisc major number, but each have a sepa‐\nrate minor number called a 'classid' that has no relation to their parent classes,\nonly to their parent qdisc. The same naming custom as for qdiscs applies.\n\n\nFILTERS\nFilters have a three part ID, which is only needed when using a hashed filter hierar‐\nchy.\n\n### PARAMETERS\n\nThe following parameters are widely used in TC. For other parameters, see the man pages for\nindividual qdiscs.\n\n\nRATES Bandwidths or rates. These parameters accept a floating point number, possibly fol‐\nlowed by either a unit (both SI and IEC units supported), or a float followed by a '%'\ncharacter to specify the rate as a percentage of the device's speed (e.g. 5%, 99.5%).\nWarning: specifying the rate as a percentage means a fraction of the current speed; if\nthe speed changes, the value will not be recalculated.\n\nbit or a bare number\nBits per second\n\nkbit Kilobits per second\n\nmbit Megabits per second\n\ngbit Gigabits per second\n\ntbit Terabits per second\n\nbps Bytes per second\n\nkbps Kilobytes per second\n\nmbps Megabytes per second\n\ngbps Gigabytes per second\n\ntbps Terabytes per second\n\n\nTo specify in IEC units, replace the SI prefix (k-, m-, g-, t-) with IEC prefix (ki-,\nmi-, gi- and ti-) respectively.\n\n\nTC store rates as a 32-bit unsigned integer in bps internally, so we can specify a max\nrate of 4294967295 bps.\n\n\nTIMES Length of time. Can be specified as a floating point number followed by an optional\nunit:\n\ns, sec or secs\nWhole seconds\n\nms, msec or msecs\nMilliseconds\n\nus, usec, usecs or a bare number\nMicroseconds.\n\n\nTC defined its own time unit (equal to microsecond) and stores time values as 32-bit\nunsigned integer, thus we can specify a max time value of 4294967295 usecs.\n\n\nSIZES Amounts of data. Can be specified as a floating point number followed by an optional\nunit:\n\nb or a bare number\nBytes.\n\nkbit Kilobits\n\nkb or k\nKilobytes\n\nmbit Megabits\n\nmb or m\nMegabytes\n\ngbit Gigabits\n\ngb or g\nGigabytes\n\n\nTC stores sizes internally as 32-bit unsigned integer in byte, so we can specify a max\nsize of 4294967295 bytes.\n\n\nVALUES Other values without a unit. These parameters are interpreted as decimal by default,\nbut you can indicate TC to interpret them as octal and hexadecimal by adding a '0' or\n'0x' prefix respectively.\n\n### TC COMMANDS\n\nThe following commands are available for qdiscs, classes and filter:\n\nadd Add a qdisc, class or filter to a node. For all entities, a parent must be passed, ei‐\nther by passing its ID or by attaching directly to the root of a device. When creat‐\ning a qdisc or a filter, it can be named with the handle parameter. A class is named\nwith the classid parameter.\n\n\ndelete A qdisc can be deleted by specifying its handle, which may also be 'root'. All sub‐\nclasses and their leaf qdiscs are automatically deleted, as well as any filters at‐\ntached to them.\n\n\nchange Some entities can be modified 'in place'. Shares the syntax of 'add', with the excep‐\ntion that the handle cannot be changed and neither can the parent. In other words,\nchange cannot move a node.\n\n\nreplace\nPerforms a nearly atomic remove/add on an existing node id. If the node does not exist\nyet it is created.\n\n\nget Displays a single filter given the interface DEV, qdisc-id, priority, protocol and\nfilter-id.\n\n\nshow Displays all filters attached to the given interface. A valid parent ID must be\npassed.\n\n\nlink Only available for qdiscs and performs a replace where the node must exist already.\n\n### MONITOR\n\nThe tc utility can monitor events generated by the kernel such as adding/deleting qdiscs,\nfilters or actions, or modifying existing ones.\n\nThe following command is available for monitor :\n\nfile If the file option is given, the tc does not listen to kernel events, but opens the\ngiven file and dumps its contents. The file has to be in binary format and contain\nnetlink messages.\n\n### OPTIONS\n\n#### -b -b -batch -batch\n\nread commands from provided file or standard input and invoke them. First failure\nwill cause termination of tc.\n\n#### -force\n\nof the commands, the application return code will be non zero.\n\n#### -o -oneline\n\noutput each record on a single line, replacing line feeds with the '\\' character. This\nis convenient when you want to count records with wc(1) or to grep(1) the output.\n\n#### -n -net -netns\n\nswitches tc to the specified network namespace NETNS. Actually it just simplifies ex‐\necuting of:\n\nip netns exec NETNS tc [ OPTIONS ] OBJECT { COMMAND | help }\n\nto\n\ntc -n[etns] NETNS [ OPTIONS ] OBJECT { COMMAND | help }\n\n#### -N -Numeric\n\nPrint the number of protocol, scope, dsfield, etc directly instead of converting it to\nhuman readable name.\n\n#### -cf -conf\n\nspecifies path to the config file. This option is used in conjunction with other op‐\ntions (e.g. -nm).\n\n#### -t -timestamp\n\nWhen tc monitor runs, print timestamp before the event message in format:\nTimestamp:
usec\n\n#### -ts -tshort\n\nWhen tc monitor runs, prints short timestamp before the event message in format:\n[--
T.]\n\n### FORMAT\n\nThe show command has additional formatting options:\n\n#### -s -stats -statistics\n\noutput more statistics about packet usage.\n\n#### -d -details\n\noutput more detailed information about rates and cell sizes.\n\n#### -r -raw\n\noutput raw hex values for handles.\n\n#### -p -pretty\n\nfor u32 filter, decode offset and mask values to equivalent filter commands based on\nTCP/IP. In JSON output, add whitespace to improve readability.\n\n#### -iec\n\n#### -g -graph\n\nshows classes as ASCII graph. Prints generic stats info under each class if -s option\nwas specified. Classes can be filtered only by dev option.\n\n#### -c\n\nConfigure color output. If parameter is omitted or always, color output is enabled re‐\ngardless of stdout state. If parameter is auto, stdout is checked to be a terminal be‐\nfore enabling color output. If parameter is never, color output is disabled. If speci‐\nfied multiple times, the last one takes precedence. This flag is ignored if -json is\nalso given.\n\n#### -j -json\n\nDisplay results in JSON format.\n\n#### -nm -name\n\nresolve class name from /etc/iproute2/tccls file or from file specified by -cf op‐\ntion. This file is just a mapping of classid to class name:\n\n# Here is comment\n1:40 voip # Here is another comment\n1:50 web\n1:60 ftp\n1:2 home\n\ntc will not fail if -nm was specified without -cf option but /etc/iproute2/tccls file\ndoes not exist, which makes it possible to pass -nm option for creating tc alias.\n\n#### -br -brief\n\nPrint only essential data needed to identify the filter and action (handle, cookie,\netc.) and stats. This option is currently only supported by tc filter show and tc ac‐‐\ntions ls commands.\n\n### EXAMPLES\n\ntc -g class show dev eth0\nShows classes as ASCII graph on eth0 interface.\n\ntc -g -s class show dev eth0\nShows classes as ASCII graph with stats info under each class.\n\n### HISTORY\n\ntc was written by Alexey N. Kuznetsov and added in Linux 2.2.\n\n### SEE ALSO\n\ntc-basic(8), tc-bfifo(8), tc-bpf(8), tc-cake(8), tc-cbq(8), tc-cgroup(8), tc-choke(8), tc-\ncodel(8), tc-drr(8), tc-ematch(8), tc-ets(8), tc-flow(8), tc-flower(8), tc-fq(8), tc-\nfqcodel(8), tc-fqpie(8), tc-fw(8), tc-hfsc(7), tc-hfsc(8), tc-htb(8), tc-mqprio(8), tc-\npfifo(8), tc-pfifofast(8), tc-pie(8), tc-red(8), tc-route(8), tc-sfb(8), tc-sfq(8), tc-\nstab(8), tc-tbf(8), tc-tcindex(8), tc-u32(8),\nUser documentation at http://lartc.org/, but please direct bugreports and patches to: \n\n### AUTHOR\n\nManpage maintained by bert hubert (ahu@ds9a.nl)\n\n\n\niproute2 16 December 2001 TC(8)\n\n" } ], "structuredContent": { "command": "tc", "section": "8", "mode": "man", "summary": "tc - show / manipulate traffic control settings", "synopsis": "tc [ OPTIONS ] qdisc [ add | change | replace | link | delete ] dev DEV [ parent qdisc-id |\nroot ] [ handle qdisc-id ] [ ingressblock BLOCKINDEX ] [ egressblock BLOCKINDEX ] qdisc [\nqdisc specific parameters ]\ntc [ OPTIONS ] class [ add | change | replace | delete ] dev DEV parent qdisc-id [ classid\nclass-id ] qdisc [ qdisc specific parameters ]\ntc [ OPTIONS ] filter [ add | change | replace | delete | get ] dev DEV [ parent qdisc-id |\nroot ] [ handle filter-id ] protocol protocol prio priority filtertype [ filtertype specific\nparameters ] flowid flow-id\ntc [ OPTIONS ] filter [ add | change | replace | delete | get ] block BLOCKINDEX [ handle\nfilter-id ] protocol protocol prio priority filtertype [ filtertype specific parameters ]\nflowid flow-id\ntc [ OPTIONS ] chain [ add | delete | get ] dev DEV [ parent qdisc-id | root ] filtertype [\nfiltertype specific parameters ]\ntc [ OPTIONS ] chain [ add | delete | get ] block BLOCKINDEX filtertype [ filtertype spe‐\ncific parameters ]\ntc [ OPTIONS ] [ FORMAT ] qdisc { show | list } [ dev DEV ] [ root | ingress | handle QHANDLE\n| parent CLASSID ] [ invisible ]\ntc [ OPTIONS ] [ FORMAT ] class show dev DEV\ntc [ OPTIONS ] filter show dev DEV\ntc [ OPTIONS ] filter show block BLOCKINDEX\ntc [ OPTIONS ] chain show dev DEV\ntc [ OPTIONS ] chain show block BLOCKINDEX\ntc [ OPTIONS ] monitor [ file FILENAME ]\nOPTIONS := { [ -force ] -b[atch] [ filename ] | [ -n[etns] name ] | [ -N[umeric] ] | [ -nm |", "flags": [ { "flag": "-b", "long": null, "arg": null, "description": "read commands from provided file or standard input and invoke them. First failure will cause termination of tc." }, { "flag": "", "long": null, "arg": null, "description": "of the commands, the application return code will be non zero." }, { "flag": "-o", "long": null, "arg": null, "description": "output each record on a single line, replacing line feeds with the '\\' character. This is convenient when you want to count records with wc(1) or to grep(1) the output." }, { "flag": "-n", "long": null, "arg": null, "description": "switches tc to the specified network namespace NETNS. Actually it just simplifies ex‐ ecuting of: ip netns exec NETNS tc [ OPTIONS ] OBJECT { COMMAND | help } to tc -n[etns] NETNS [ OPTIONS ] OBJECT { COMMAND | help }" }, { "flag": "-N", "long": null, "arg": null, "description": "Print the number of protocol, scope, dsfield, etc directly instead of converting it to human readable name." }, { "flag": "", "long": null, "arg": null, "description": "specifies path to the config file. This option is used in conjunction with other op‐ tions (e.g. -nm)." }, { "flag": "-t", "long": null, "arg": null, "description": "When tc monitor runs, print timestamp before the event message in format: Timestamp:
usec" }, { "flag": "", "long": null, "arg": null, "description": "When tc monitor runs, prints short timestamp before the event message in format: [--
T.]" } ], "examples": [ "tc -g class show dev eth0", "Shows classes as ASCII graph on eth0 interface.", "tc -g -s class show dev eth0", "Shows classes as ASCII graph with stats info under each class." ], "see_also": [ { "name": "tc-basic", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-basic/8/json" }, { "name": "tc-bfifo", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-bfifo/8/json" }, { "name": "tc-bpf", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-bpf/8/json" }, { "name": "tc-cake", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-cake/8/json" }, { "name": "tc-cbq", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-cbq/8/json" }, { "name": "tc-cgroup", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-cgroup/8/json" }, { "name": "tc-choke", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-choke/8/json" }, { "name": "codel", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/codel/8/json" }, { "name": "tc-drr", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-drr/8/json" }, { "name": "tc-ematch", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-ematch/8/json" }, { "name": "tc-ets", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-ets/8/json" }, { "name": "tc-flow", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-flow/8/json" }, { "name": "tc-flower", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-flower/8/json" }, { "name": "tc-fq", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-fq/8/json" }, { "name": "fqcodel", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/fqcodel/8/json" }, { "name": "tc-fqpie", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-fqpie/8/json" }, { "name": "tc-fw", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-fw/8/json" }, { "name": "tc-hfsc", "section": "7", "url": "https://www.chedong.com/phpMan.php/man/tc-hfsc/7/json" }, { "name": "tc-hfsc", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-hfsc/8/json" }, { "name": "tc-htb", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-htb/8/json" }, { "name": "tc-mqprio", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-mqprio/8/json" }, { "name": "pfifo", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/pfifo/8/json" }, { "name": "tc-pfifofast", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-pfifofast/8/json" }, { "name": "tc-pie", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-pie/8/json" }, { "name": "tc-red", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-red/8/json" }, { "name": "tc-route", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-route/8/json" }, { "name": "tc-sfb", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-sfb/8/json" }, { "name": "tc-sfq", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-sfq/8/json" }, { "name": "stab", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/stab/8/json" }, { "name": "tc-tbf", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-tbf/8/json" }, { "name": "tc-tcindex", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-tcindex/8/json" }, { "name": "tc-u32", "section": "8", "url": "https://www.chedong.com/phpMan.php/man/tc-u32/8/json" } ], "section_outline": [ { "name": "NAME", "lines": 2, "subsections": [] }, { "name": "SYNOPSIS", "lines": 40, "subsections": [ { "name": "-nam -cf -c -t -t -o", "lines": 3, "flag": "-o" }, { "name": "-col", "lines": 1 } ] }, { "name": "DESCRIPTION", "lines": 29, "subsections": [] }, { "name": "QDISCS", "lines": 10, "subsections": [] }, { "name": "CLASSES", "lines": 7, "subsections": [] }, { "name": "FILTERS", "lines": 38, "subsections": [] }, { "name": "QEVENTS", "lines": 13, "subsections": [] }, { "name": "CLASSLESS QDISCS", "lines": 83, "subsections": [] }, { "name": "CONFIGURING CLASSLESS QDISCS", "lines": 12, "subsections": [] }, { "name": "CLASSFUL QDISCS", "lines": 42, "subsections": [] }, { "name": "THEORY OF OPERATION", "lines": 33, "subsections": [] }, { "name": "NAMING", "lines": 25, "subsections": [] }, { "name": "PARAMETERS", "lines": 88, "subsections": [] }, { "name": "TC COMMANDS", "lines": 34, "subsections": [] }, { "name": "MONITOR", "lines": 10, "subsections": [] }, { "name": "OPTIONS", "lines": 1, "subsections": [ { "name": "-b -b -batch -batch", "lines": 4, "flag": "-b" }, { "name": "-force", "lines": 3 }, { "name": "-o -oneline", "lines": 4, "flag": "-o" }, { "name": "-n -net -netns", "lines": 10, "flag": "-n" }, { "name": "-N -Numeric", "lines": 4, "flag": "-N" }, { "name": "-cf -conf", "lines": 4 }, { "name": "-t -timestamp", "lines": 4, "flag": "-t" }, { "name": "-ts -tshort", "lines": 4 } ] }, { "name": "FORMAT", "lines": 3, "subsections": [ { "name": "-s -stats -statistics", "lines": 3, "flag": "-s" }, { "name": "-d -details", "lines": 3, "flag": "-d" }, { "name": "-r -raw", "lines": 3, "flag": "-r" }, { "name": "-p -pretty", "lines": 4, "flag": "-p" }, { "name": "-iec", "lines": 1 }, { "name": "-g -graph", "lines": 4, "flag": "-g" }, { "name": "-c", "lines": 7, "flag": "-c" }, { "name": "-j -json", "lines": 3, "flag": "-j" }, { "name": "-nm -name", "lines": 13 }, { "name": "-br -brief", "lines": 5 } ] }, { "name": "EXAMPLES", "lines": 7, "subsections": [] }, { "name": "HISTORY", "lines": 2, "subsections": [] }, { "name": "SEE ALSO", "lines": 6, "subsections": [ { "name": "dev@vger.kernel.org>", "lines": 1 } ] }, { "name": "AUTHOR", "lines": 5, "subsections": [] } ] } }