# mpt-status(8) - man - phpMan

[MPT-STATUS(8)](https://www.chedong.com/phpMan.php/man/MPT-STATUS/8/markdown)                          System Manager's Manual                         [MPT-STATUS(8)](https://www.chedong.com/phpMan.php/man/MPT-STATUS/8/markdown)



## NAME
       mpt-status - retrieve configuration and health status from LSI hardware RAID controllers


## SYNOPSIS
### mpt-status [ options ]


## DESCRIPTION
       The mpt-status software is a query tool to access the running configuration and status of LSI
       SCSI HBAs.  mpt-status allows you to monitor the health and status of your RAID setup.


## OPTIONS
          **--autoload**
              This will try to automatically load the mptctl kernel module.

### -u --controller <int>
              Set the IOC unit (controller).

### -h --help
              Print some help information.

### -n --newstyle
              Use the new style output. This parameter was introduced to retain  backwards  compati‐
              bility.  If  not set, you get the old style output.  It is very likely that the output
              of the newstyle format will change heavily in the future, so do not rely  on  it  when
              writing plugins for monitoring software, for example.

### -i --set
              Set id of primary device (check README).

### -p --probe
              Use this to probe SCSI id's when not on id 0.

### -q --quiet
              Do not display any warnings.

### -s --status
              Only print the status information. This can be used for easy scripting

### -v --verbose
              Print verbose information, such as warnings

### -V --version
              Print version information

### -d --debug [<int>]
              Enable debugging and set level optionally.  NOTE: This is not fully implemented yet.


## DIAGNOSTICS
       The  program's  [exit(2)](https://www.chedong.com/phpMan.php/man/exit/2/markdown)  status  is meant to be interpreted as a bit mask. If everything went
       well, zero is returned. If not (i.e. if for example an error  or  unknown  condition  is  de‐
       tected), the bits of the return value shall be interpreted as:

       Bit   Value   Meaning
       ─────────────────────────────────────────────────────────────────
         0       1   Abnormal condition / unknown error
         1       2   A logical volume has failed
         2       4   A logical volume is degraded

         3       8   A logical volume is resyncing
         4      16   At least one physical disk failed
         5      32   At least one physical disk is in warning condition


## REPORTING BUGS
       Report  bugs to your linux distribution or software vendor, if mpt-status was bundled on your
       installation. If you have been compiling mpt-status from the vanilla sources  and  experience
       problems, redirect them to preferably <<ratz@drugphish.ch>> or <<rnibali@pyx.ch>>.


## BUGS
       Besides  design  bugs, gross software engineering and missing features, this software is con‐
       sidered pretty stable and can be used in production environments.


## FILES
       _/dev/mptctl_


## SEE ALSO
       LSI Logic provides CLI tools for megaraid controllers which you can find  on  their  webpage,
       following <http://www.lsil.com/cm/DownloadSearch.do>


## AUTHOR
       mpt-status was written by Roberto Nibali <<ratz@drugphish.ch>>.

       This manual page was written by Steffen Joeris <<steffen.joeris@skolelinux.de>>, for the Debian
       project (but may be used by others).



                                            November 2006                              [MPT-STATUS(8)](https://www.chedong.com/phpMan.php/man/MPT-STATUS/8/markdown)