# man > mh-tailor(5) [_MH-TAILOR_(5mh)](https://www.chedong.com/phpMan.php/man/MH-TAILOR/5mh/markdown) [_MH-TAILOR_(5mh)](https://www.chedong.com/phpMan.php/man/MH-TAILOR/5mh/markdown) ## NAME mh-tailor, mts.conf - mail transport configuration for nmh message handler ## DESCRIPTION The file _/etc/nmh/mts.conf_ defines run-time options for those **nmh **programs which interact (in some form) with the message transport system. At present, these (user) programs are: **ap**, **inc**, **msgchk**, **post**, **rcvdist**, and **rcvpack**. Each option should be given on a single line. Blank lines and lines which begin with `#' are ignored. The options available along with default values and a description of their meanings are listed below: **mts**: The mail transport method to use. The three acceptable options are **smtp **(which is the default), **sendmail/smtp**, and **sendmail/pipe**. If you use **smtp**, this will enable a direct SMTP interface in **nmh**. When sending mail, instead of passing the message to the mail transport agent, **post **will open a socket con‐ nection to the mail port on the machine specified in the **servers **entry. If you use **sendmail/smtp**, then **post **will send messages by forking a local copy of **send‐** **mail**. It will still speak SMTP with this local copy of **sendmail**. For backward compati‐ bility, **sendmail/smtp **can be abbreviated to **sendmail**. The third alternative, **sendmail/pipe**, also forks a local copy of **sendmail **but feeds the message directly to it, using **sendmail -t**. This replaces the old, undocumented **spost** mechanism and retains some of its limitations, such as lack of support for the “Dcc:” header field, as described in the **send **and **post **manual pages. **localname**: The hostname **nmh **considers local. It should typically be a fully qualified hostname. If this is not set, depending on the version of Unix you're running, **nmh **will query the system for this value (e.g. uname, gethostname, etc.), and attempt to fully qualify this value. If you are using POP to retrieve new messages, you may want to set this value to the name of the POP server, so that outgoing messages appear to have originated on the POP server. **localdomain**: If this is set, a `.' followed by this string will be appended to your hostname. This should only be needed, if for some reason **nmh **is not able to fully qualify the hostname returned by the system (e.g. uname, gethostname, etc.). **clientname**: This option specifies the host name that **nmh **will give in the SMTP **HELO **(and **EHLO**) com‐ mand, when posting mail. If not set, the default is to use the host name that **nmh **con‐ siders local (see **localname **above). If this option is set, but empty, no **HELO **command will be given. Although the **HELO **command is required by RFC 821, many SMTP servers do not require it. Early versions of _SendMail_ will fail if the hostname given in the **HELO **command is the local host. Later versions of _SendMail_ will complain if you omit the **HELO **command. If you run _SendMail_, find out what your system expects and set this field if needed. **systemname**: This option is only used for UUCP mail. It specifies the name of the local host in the UUCP “domain”. If not set, depending on the version of Unix you're running, **nmh **will query the system for this value. This has no equivalent in the **nmh **configuration file. **mmdfldir**: /var/mail The directory where mail drops are kept. If this option is set, but empty, the user's home directory is used. This overrides the default value chosen at the time of compila‐ tion. **mmdflfil**: The name of the mail drop file in the directory where mail drops are kept. If this is empty, the user's login name is used. This overrides the default value (which is empty). **spoollocking**: fcntl The locking algorithm to use when opening the mail drop. Can be any one of the follow‐ ing: fcntl dot flock lockf **maildelivery**: /usr/lib/mh/maildelivery The name of the system-wide default _maildelivery_ file. See [_slocal_(1)](https://www.chedong.com/phpMan.php/man/slocal/1/markdown) for the details. ### SMTP support This option is only available if you set **mts **to **smtp**. **servers**: localhost A single hostname to be used when performing mail submission via SMTP. Previous ver‐ sions of **nmh **supported multiple hostnames for **servers**, but the current version of **nmh** only supports a single entry (the name is kept for backwards compatibility reasons). This can be overridden via the **-server **switch to [_send_(1)](https://www.chedong.com/phpMan.php/man/send/1/markdown). It is not possible to change the mail submission port number in the **servers **entry; see the **-port **switch to [_send_(1)](https://www.chedong.com/phpMan.php/man/send/1/markdown) for this functionality. ### SendMail This option is only available if you set **mts **to **sendmail/smtp **or **sendmail/pipe**. **sendmail**: /usr/sbin/sendmail The pathname to the **sendmail **program. ### Post Office Protocol **pophost**: The name of the default POP service host. If this is not set, then **nmh **looks in the standard mail drop areas for waiting mail, otherwise the named POP service host is con‐ sulted. ### File Locking A few words on locking: **nmh **has two main uses for locking: locking the mail spool during mail incorporation, and locking metadata files (sequence files, the context) during updates. These locking methods can be configured separately from each other. For locking the mail spool, the **spoollocking **entry in [_mh-tailor_(5)](https://www.chedong.com/phpMan.php/man/mh-tailor/5/markdown) will control the locking algorithm to use when **inc **incorporates mail from the spool file. If no entry is given, a de‐ fault based on the operating system type will be chosen. For locking all other files, the **datalocking **entry in [_mh-profile_(5)](https://www.chedong.com/phpMan.php/man/mh-profile/5/markdown) controls the locking al‐ gorithm used for all other file access. If no entry is given, the **fcntl **lock method will be chosen. If you do not wish to use kernel-based locking, _dot_ locking is an option available. If “--enable-lockdir=directory” is not specified at build time, lock files will be created in the directory where the file being locked resides. Otherwise, lock files will be created in the directory specified by “--enable-lockdir”. Prior to installing **nmh**, you should see how locking is done at your site, and set the appro‐ priate values. ## FILES /etc/nmh/mts.conf nmh mts configuration file ## PROFILE COMPONENTS None ## SEE ALSO [_mh-mts_(8)](https://www.chedong.com/phpMan.php/man/mh-mts/8/markdown), [_post_(8)](https://www.chedong.com/phpMan.php/man/post/8/markdown) [_send_(8)](https://www.chedong.com/phpMan.php/man/send/8/markdown) ## DEFAULTS As listed above. The path of the mail transport configuration file can be changed with the MHMTSCONF environment variable and augmented with the MHMTSUSERCONF environment variable, see [_mh-profile_(5)](https://www.chedong.com/phpMan.php/man/mh-profile/5/markdown). ## BUGS Failure to open any mail transport configuration file is silently ignored. Therefore, it's best to avoid dynamic creation of such a file with the intent of use via the MHMTSCONF or MHMTSUSERCONF environment variables. If such use is necessary, the ability to successfully open the file should first be verified. nmh-1.8 2017-02-19 [_MH-TAILOR_(5mh)](https://www.chedong.com/phpMan.php/man/MH-TAILOR/5mh/markdown)