{
    "content": [
        {
            "type": "text",
            "text": "# lvrename(8) (man)\n\n## TLDR\n\n> Rename a logical volume.\n\n- Rename an LV using full paths:\n  `sudo lvrename {{/dev/vg_name/old_lv}} {{/dev/vg_name/new_lv}}`\n- Rename an LV using the volume group and names:\n  `sudo lvrename {{vg_name}} {{old_lv}} {{new_lv}}`\n- Answer \"yes\" to any prompts:\n  `sudo lvrename {{-y|--yes}} {{/dev/vg_name/old_lv}} {{/dev/vg_name/new_lv}}`\n\n*Source: tldr-pages*\n\n---\n\n**Summary:** lvrename - Rename a logical volume\n\n**Synopsis:** lvrename positionargs\n[ optionargs ]\n\n## Flags\n\n| Flag | Long | Arg | Description |\n|------|------|-----|-------------|\n| -A | --autobackup | — | Specifies if metadata should be backed up automatically after a change. Enabling this is strongly advised! See vgcfgback |\n| -d | --debug | — | Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if conf |\n| -h | --help | — | Display help text. --lockopt String Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more informa |\n| — | --longhelp | — | Display long help text. |\n| — | --nolocking | — | Disable locking. |\n| — | --noudevsync | — | Disables udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of an |\n| -q | --quiet | — | Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer  |\n| -t | --test | — | Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but neverthel |\n| -v | --verbose | — | Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr. |\n| — | --version | — | Display version information. |\n| -y | --yes | — | Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic  |\n\n## Examples\n\n- `Rename \"lvold\" to \"lvnew\":`\n- `An alternate syntax to rename \"lvold\" to \"lvnew\":`\n\n## See Also\n\n- lvm(8)\n- lvm.conf(5)\n- lvmconfig(8)\n- pvchange(8)\n- pvck(8)\n- pvcreate(8)\n- pvdisplay(8)\n- pvmove(8)\n- pvremove(8)\n- pvresize(8)\n- pvs(8)\n- can(8)\n- vgcfgbackup(8)\n- vgcfgrestore(8)\n- vgchange(8)\n- vgck(8)\n- vgcreate(8)\n- vgconvert(8)\n- vgdisplay(8)\n- export(8)\n- vgextend(8)\n- vgimport(8)\n- vgimportclone(8)\n- vgmerge(8)\n- vgmknodes(8)\n- vgreduce(8)\n- move(8)\n- vgrename(8)\n- vgs(8)\n- vgscan(8)\n- vgsplit(8)\n- lvcreate(8)\n- lvchange(8)\n- lvconvert(8)\n- lvdisplay(8)\n- lvextend(8)\n- lvreduce(8)\n- lvremove(8)\n- name(8)\n- lvresize(8)\n- lvs(8)\n- lvscan(8)\n- lvm-fullreport(8)\n- lvm-lvpoll(8)\n- lvm2-activation-generator(8)\n- blkdeactivate(8)\n- lvmdump(8)\n- dmeventd(8)\n- lvmpolld(8)\n- lvmlockd(8)\n- lvmlockctl(8)\n- cmirrord(8)\n- lvmdbusd(8)\n- lvmsystemid(7)\n- lvmreport(7)\n- lvmraid(7)\n- lvmthin(7)\n- lvmcache(7)\n\n## Section Outline\n\n- **NAME** (2 lines)\n- **SYNOPSIS** (3 lines)\n- **DESCRIPTION** (3 lines)\n- **USAGE** (27 lines)\n- **OPTIONS** (1 lines) — 11 subsections\n  - -A --autobackup (12 lines)\n  - -d --debug (7 lines)\n  - -h --help (6 lines)\n  - --longhelp (2 lines)\n  - --nolocking (2 lines)\n  - --noudevsync (7 lines)\n  - -q --quiet (10 lines)\n  - -t --test (5 lines)\n  - -v --verbose (3 lines)\n  - --version (2 lines)\n  - -y --yes (3 lines)\n- **VARIABLES** (19 lines)\n- **ENVIRONMENT VARIABLES** (3 lines)\n- **EXAMPLES** (1 lines) — 2 subsections\n  - lvrename /dev/vg02/lvold vg02/lvnew (1 lines)\n  - lvrename vg02 lvold lvnew (1 lines)\n- **SEE ALSO** (21 lines)\n\n## Full Content\n\n### NAME\n\nlvrename - Rename a logical volume\n\n### SYNOPSIS\n\nlvrename positionargs\n[ optionargs ]\n\n### DESCRIPTION\n\nlvrename  renames  an existing LV or a historical LV (see lvremove for historical LV informa‐\ntion.)\n\n### USAGE\n\nlvrename VG LV LVnew\n[ COMMONOPTIONS ]\n\nlvrename LV LVnew\n[ COMMONOPTIONS ]\n\nCommon options for command:\n[ -A|--autobackup y|n ]\n[    --noudevsync ]\n[    --reportformat basic|json ]\n\nCommon options for lvm:\n[ -d|--debug ]\n[ -h|--help ]\n[ -q|--quiet ]\n[ -t|--test ]\n[ -v|--verbose ]\n[ -y|--yes ]\n[    --commandprofile String ]\n[    --config String ]\n[    --driverloaded y|n ]\n[    --lockopt String ]\n[    --longhelp ]\n[    --nolocking ]\n[    --profile String ]\n[    --version ]\n\n### OPTIONS\n\n#### -A --autobackup\n\nSpecifies if metadata should be backed up automatically after a change.  Enabling this\nis strongly advised! See vgcfgbackup(8) for more information.\n\n--commandprofile String\nThe command profile to use for command configuration.  See lvm.conf(5) for more infor‐\nmation about profiles.\n\n--config String\nConfig settings for the command. These override lvm.conf settings.  The String arg\nuses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)\nfor more information about config.\n\n#### -d --debug\n\nSet debug level. Repeat from 1 to 6 times to increase the detail of messages sent to\nthe log file and/or syslog (if configured).\n\n--driverloaded y|n\nIf set to no, the command will not attempt to use device-mapper.  For testing and de‐\nbugging.\n\n#### -h --help\n\nDisplay help text.\n\n--lockopt String\nUsed to pass options for special cases to lvmlockd.  See lvmlockd(8) for more informa‐\ntion.\n\n#### --longhelp\n\nDisplay long help text.\n\n#### --nolocking\n\nDisable locking.\n\n#### --noudevsync\n\nDisables udev synchronisation. The process will not wait for notification from udev.\nIt will continue irrespective of any possible udev processing in the background. Only\nuse this if udev is not running or has rules that ignore the devices LVM creates.\n\n--profile String\nAn alias for --commandprofile or --metadataprofile, depending on the command.\n\n#### -q --quiet\n\nSuppress output and log messages. Overrides --debug and --verbose.  Repeat once to\nalso suppress any prompts with answer 'no'.\n\n--reportformat basic|json\nOverrides current output format for reports which is defined globally by the re‐\nport/outputformat setting in lvm.conf.  basic is the original format with columns and\nrows.  If there is more than one report per command, each report is prefixed with the\nreport name for identification. json produces report output in JSON format. See lvmre‐‐\nport(7) for more information.\n\n#### -t --test\n\nRun in test mode. Commands will not update metadata.  This is implemented by disabling\nall metadata writing but nevertheless returning success to the calling function. This\nmay lead to unusual error messages in multi-stage operations if a tool relies on read‐\ning back metadata it believes has changed but hasn't.\n\n#### -v --verbose\n\nSet verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to\nstdout and stderr.\n\n#### --version\n\nDisplay version information.\n\n#### -y --yes\n\nDo not prompt for confirmation interactively but always assume the answer yes. Use\nwith extreme caution.  (For automatic no, see -qq.)\n\n### VARIABLES\n\nVG\nVolume Group name.  See lvm(8) for valid names.\n\nLV\nLogical  Volume name.  See lvm(8) for valid names.  An LV positional arg generally in‐\ncludes the VG name and LV name, e.g. VG/LV.\n\nString\nSee the option description for information about the string content.\n\nSize[UNIT]\nSize is an input number that accepts an optional unit.  Input units are always treated\nas base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.\nThe default input unit is specified by letter, followed  by  |UNIT.   UNIT  represents\nother  possible  input  units:  bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is sectors of 512\nbytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.   (This\nshould  not  be  confused  with the output control --units, where capital letters mean\nmultiple of 1000.)\n\n### ENVIRONMENT VARIABLES\n\nSee lvm(8) for information about environment variables used by lvm.  For example, LVMVGNAME\ncan generally be substituted for a required VG parameter.\n\n### EXAMPLES\n\nRename \"lvold\" to \"lvnew\":\n\n#### lvrename /dev/vg02/lvold vg02/lvnew\n\nAn alternate syntax to rename \"lvold\" to \"lvnew\":\n\n#### lvrename vg02 lvold lvnew\n\n### SEE ALSO\n\nlvm(8) lvm.conf(5) lvmconfig(8)\n\npvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8) pvmove(8) pvremove(8) pvresize(8) pvs(8) pvs‐‐\ncan(8)\n\nvgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8)  vg‐‐\nexport(8)  vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgre‐‐\nmove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)\n\nlvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8)  lvremove(8)  lvre‐‐\nname(8) lvresize(8) lvs(8) lvscan(8)\n\nlvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)\n\ndmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)\n\nlvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)\n\n\n\nRed Hat, Inc.                     LVM TOOLS 2.03.11(2) (2021-01-08)                      LVRENAME(8)\n\n"
        }
    ],
    "structuredContent": {
        "command": "lvrename",
        "section": "8",
        "mode": "man",
        "summary": "lvrename - Rename a logical volume",
        "synopsis": "lvrename positionargs\n[ optionargs ]",
        "tldr_summary": "Rename a logical volume.",
        "tldr_examples": [
            {
                "description": "Rename an LV using full paths",
                "command": "sudo lvrename {{/dev/vg_name/old_lv}} {{/dev/vg_name/new_lv}}"
            },
            {
                "description": "Rename an LV using the volume group and names",
                "command": "sudo lvrename {{vg_name}} {{old_lv}} {{new_lv}}"
            },
            {
                "description": "Answer \"yes\" to any prompts",
                "command": "sudo lvrename {{-y|--yes}} {{/dev/vg_name/old_lv}} {{/dev/vg_name/new_lv}}"
            }
        ],
        "tldr_source": "official",
        "flags": [
            {
                "flag": "-A",
                "long": "--autobackup",
                "arg": null,
                "description": "Specifies if metadata should be backed up automatically after a change. Enabling this is strongly advised! See vgcfgbackup(8) for more information. --commandprofile String The command profile to use for command configuration. See lvm.conf(5) for more infor‐ mation about profiles. --config String Config settings for the command. These override lvm.conf settings. The String arg uses the same format as lvm.conf, or may use section/field syntax. See lvm.conf(5) for more information about config."
            },
            {
                "flag": "-d",
                "long": "--debug",
                "arg": null,
                "description": "Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). --driverloaded y|n If set to no, the command will not attempt to use device-mapper. For testing and de‐ bugging."
            },
            {
                "flag": "-h",
                "long": "--help",
                "arg": null,
                "description": "Display help text. --lockopt String Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more informa‐ tion."
            },
            {
                "flag": "",
                "long": "--longhelp",
                "arg": null,
                "description": "Display long help text."
            },
            {
                "flag": "",
                "long": "--nolocking",
                "arg": null,
                "description": "Disable locking."
            },
            {
                "flag": "",
                "long": "--noudevsync",
                "arg": null,
                "description": "Disables udev synchronisation. The process will not wait for notification from udev. It will continue irrespective of any possible udev processing in the background. Only use this if udev is not running or has rules that ignore the devices LVM creates. --profile String An alias for --commandprofile or --metadataprofile, depending on the command."
            },
            {
                "flag": "-q",
                "long": "--quiet",
                "arg": null,
                "description": "Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer 'no'. --reportformat basic|json Overrides current output format for reports which is defined globally by the re‐ port/outputformat setting in lvm.conf. basic is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. json produces report output in JSON format. See lvmre‐‐ port(7) for more information."
            },
            {
                "flag": "-t",
                "long": "--test",
                "arg": null,
                "description": "Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on read‐ ing back metadata it believes has changed but hasn't."
            },
            {
                "flag": "-v",
                "long": "--verbose",
                "arg": null,
                "description": "Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr."
            },
            {
                "flag": "",
                "long": "--version",
                "arg": null,
                "description": "Display version information."
            },
            {
                "flag": "-y",
                "long": "--yes",
                "arg": null,
                "description": "Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see -qq.)"
            }
        ],
        "examples": [
            "Rename \"lvold\" to \"lvnew\":",
            "An alternate syntax to rename \"lvold\" to \"lvnew\":"
        ],
        "see_also": [
            {
                "name": "lvm",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvm/8/json"
            },
            {
                "name": "lvm.conf",
                "section": "5",
                "url": "https://www.chedong.com/phpMan.php/man/lvm.conf/5/json"
            },
            {
                "name": "lvmconfig",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmconfig/8/json"
            },
            {
                "name": "pvchange",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvchange/8/json"
            },
            {
                "name": "pvck",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvck/8/json"
            },
            {
                "name": "pvcreate",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvcreate/8/json"
            },
            {
                "name": "pvdisplay",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvdisplay/8/json"
            },
            {
                "name": "pvmove",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvmove/8/json"
            },
            {
                "name": "pvremove",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvremove/8/json"
            },
            {
                "name": "pvresize",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvresize/8/json"
            },
            {
                "name": "pvs",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/pvs/8/json"
            },
            {
                "name": "can",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/can/8/json"
            },
            {
                "name": "vgcfgbackup",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgcfgbackup/8/json"
            },
            {
                "name": "vgcfgrestore",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgcfgrestore/8/json"
            },
            {
                "name": "vgchange",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgchange/8/json"
            },
            {
                "name": "vgck",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgck/8/json"
            },
            {
                "name": "vgcreate",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgcreate/8/json"
            },
            {
                "name": "vgconvert",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgconvert/8/json"
            },
            {
                "name": "vgdisplay",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgdisplay/8/json"
            },
            {
                "name": "export",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/export/8/json"
            },
            {
                "name": "vgextend",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgextend/8/json"
            },
            {
                "name": "vgimport",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgimport/8/json"
            },
            {
                "name": "vgimportclone",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgimportclone/8/json"
            },
            {
                "name": "vgmerge",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgmerge/8/json"
            },
            {
                "name": "vgmknodes",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgmknodes/8/json"
            },
            {
                "name": "vgreduce",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgreduce/8/json"
            },
            {
                "name": "move",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/move/8/json"
            },
            {
                "name": "vgrename",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgrename/8/json"
            },
            {
                "name": "vgs",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgs/8/json"
            },
            {
                "name": "vgscan",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgscan/8/json"
            },
            {
                "name": "vgsplit",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/vgsplit/8/json"
            },
            {
                "name": "lvcreate",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvcreate/8/json"
            },
            {
                "name": "lvchange",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvchange/8/json"
            },
            {
                "name": "lvconvert",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvconvert/8/json"
            },
            {
                "name": "lvdisplay",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvdisplay/8/json"
            },
            {
                "name": "lvextend",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvextend/8/json"
            },
            {
                "name": "lvreduce",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvreduce/8/json"
            },
            {
                "name": "lvremove",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvremove/8/json"
            },
            {
                "name": "name",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/name/8/json"
            },
            {
                "name": "lvresize",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvresize/8/json"
            },
            {
                "name": "lvs",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvs/8/json"
            },
            {
                "name": "lvscan",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvscan/8/json"
            },
            {
                "name": "lvm-fullreport",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvm-fullreport/8/json"
            },
            {
                "name": "lvm-lvpoll",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvm-lvpoll/8/json"
            },
            {
                "name": "lvm2-activation-generator",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvm2-activation-generator/8/json"
            },
            {
                "name": "blkdeactivate",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/blkdeactivate/8/json"
            },
            {
                "name": "lvmdump",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmdump/8/json"
            },
            {
                "name": "dmeventd",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/dmeventd/8/json"
            },
            {
                "name": "lvmpolld",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmpolld/8/json"
            },
            {
                "name": "lvmlockd",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmlockd/8/json"
            },
            {
                "name": "lvmlockctl",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmlockctl/8/json"
            },
            {
                "name": "cmirrord",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/cmirrord/8/json"
            },
            {
                "name": "lvmdbusd",
                "section": "8",
                "url": "https://www.chedong.com/phpMan.php/man/lvmdbusd/8/json"
            },
            {
                "name": "lvmsystemid",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmsystemid/7/json"
            },
            {
                "name": "lvmreport",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmreport/7/json"
            },
            {
                "name": "lvmraid",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmraid/7/json"
            },
            {
                "name": "lvmthin",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmthin/7/json"
            },
            {
                "name": "lvmcache",
                "section": "7",
                "url": "https://www.chedong.com/phpMan.php/man/lvmcache/7/json"
            }
        ],
        "section_outline": [
            {
                "name": "NAME",
                "lines": 2,
                "subsections": []
            },
            {
                "name": "SYNOPSIS",
                "lines": 3,
                "subsections": []
            },
            {
                "name": "DESCRIPTION",
                "lines": 3,
                "subsections": []
            },
            {
                "name": "USAGE",
                "lines": 27,
                "subsections": []
            },
            {
                "name": "OPTIONS",
                "lines": 1,
                "subsections": [
                    {
                        "name": "-A --autobackup",
                        "lines": 12,
                        "flag": "-A",
                        "long": "--autobackup"
                    },
                    {
                        "name": "-d --debug",
                        "lines": 7,
                        "flag": "-d",
                        "long": "--debug"
                    },
                    {
                        "name": "-h --help",
                        "lines": 6,
                        "flag": "-h",
                        "long": "--help"
                    },
                    {
                        "name": "--longhelp",
                        "lines": 2,
                        "long": "--longhelp"
                    },
                    {
                        "name": "--nolocking",
                        "lines": 2,
                        "long": "--nolocking"
                    },
                    {
                        "name": "--noudevsync",
                        "lines": 7,
                        "long": "--noudevsync"
                    },
                    {
                        "name": "-q --quiet",
                        "lines": 10,
                        "flag": "-q",
                        "long": "--quiet"
                    },
                    {
                        "name": "-t --test",
                        "lines": 5,
                        "flag": "-t",
                        "long": "--test"
                    },
                    {
                        "name": "-v --verbose",
                        "lines": 3,
                        "flag": "-v",
                        "long": "--verbose"
                    },
                    {
                        "name": "--version",
                        "lines": 2,
                        "long": "--version"
                    },
                    {
                        "name": "-y --yes",
                        "lines": 3,
                        "flag": "-y",
                        "long": "--yes"
                    }
                ]
            },
            {
                "name": "VARIABLES",
                "lines": 19,
                "subsections": []
            },
            {
                "name": "ENVIRONMENT VARIABLES",
                "lines": 3,
                "subsections": []
            },
            {
                "name": "EXAMPLES",
                "lines": 1,
                "subsections": [
                    {
                        "name": "lvrename /dev/vg02/lvold vg02/lvnew",
                        "lines": 1
                    },
                    {
                        "name": "lvrename vg02 lvold lvnew",
                        "lines": 1
                    }
                ]
            },
            {
                "name": "SEE ALSO",
                "lines": 21,
                "subsections": []
            }
        ]
    }
}