{
    "mode": "man",
    "parameter": "lvm-lvpoll",
    "section": "8",
    "url": "https://www.chedong.com/phpMan.php/man/lvm-lvpoll/8/json",
    "generated": "2026-06-10T23:28:29Z",
    "synopsis": "lvm lvpoll optionargs positionargs\n[ optionargs ]",
    "sections": {
        "NAME": {
            "content": "lvm lvpoll - Continue already initiated poll operation on a logical volume\n",
            "subsections": []
        },
        "SYNOPSIS": {
            "content": "lvm lvpoll optionargs positionargs\n[ optionargs ]\n",
            "subsections": []
        },
        "DESCRIPTION": {
            "content": "lvm  lvpoll  is  an internal command used by lvmpolld(8) to monitor and complete lvconvert(8)\nand pvmove(8) operations. lvpoll itself does not initiate these  operations  and  should  not\nnormally need to be run directly.\n",
            "subsections": []
        },
        "USAGE": {
            "content": "lvm lvpoll --polloperation pvmove|convert|merge|mergethin LV ...\n[ -A|--autobackup y|n ]\n[ -i|--interval Number ]\n[    --abort ]\n[    --handlemissingpvs ]\n[ COMMONOPTIONS ]\n\nCommon options for lvm:\n[ -d|--debug ]\n[ -h|--help ]\n[ -q|--quiet ]\n[ -t|--test ]\n[ -v|--verbose ]\n[ -y|--yes ]\n[    --commandprofile String ]\n[    --config String ]\n[    --driverloaded y|n ]\n[    --lockopt String ]\n[    --longhelp ]\n[    --nolocking ]\n[    --profile String ]\n[    --version ]\n",
            "subsections": []
        },
        "OPTIONS": {
            "content": "",
            "subsections": [
                {
                    "name": "--abort",
                    "content": "Stop processing a poll operation in lvmpolld.\n",
                    "long": "--abort"
                },
                {
                    "name": "-A --autobackup",
                    "content": "Specifies if metadata should be backed up automatically after a change.  Enabling this\nis strongly advised! See vgcfgbackup(8) for more information.\n\n--commandprofile String\nThe command profile to use for command configuration.  See lvm.conf(5) for more infor‐\nmation about profiles.\n\n--config String\nConfig settings for the command. These override lvm.conf settings.  The String arg\nuses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)\nfor more information about config.\n",
                    "flag": "-A",
                    "long": "--autobackup"
                },
                {
                    "name": "-d --debug",
                    "content": "Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to\nthe log file and/or syslog (if configured).\n\n--driverloaded y|n\nIf set to no, the command will not attempt to use device-mapper.  For testing and de‐\nbugging.\n",
                    "flag": "-d",
                    "long": "--debug"
                },
                {
                    "name": "--handlemissingpvs",
                    "content": "Allows a polling operation to continue when PVs are missing, e.g. for repairs due to\nfaulty devices.\n",
                    "long": "--handlemissingpvs"
                },
                {
                    "name": "-h --help",
                    "content": "Display help text.\n",
                    "flag": "-h",
                    "long": "--help"
                },
                {
                    "name": "-i --interval",
                    "content": "Report progress at regular intervals.\n\n--lockopt String\nUsed to pass options for special cases to lvmlockd.  See lvmlockd(8) for more informa‐\ntion.\n",
                    "flag": "-i",
                    "long": "--interval"
                },
                {
                    "name": "--longhelp",
                    "content": "Display long help text.\n",
                    "long": "--longhelp"
                },
                {
                    "name": "--nolocking",
                    "content": "Disable locking.\n\n--polloperation pvmove|convert|merge|mergethin\nThe command to perform from lvmpolld.\n\n--profile String\nAn alias for --commandprofile or --metadataprofile, depending on the command.\n",
                    "long": "--nolocking"
                },
                {
                    "name": "-q --quiet",
                    "content": "Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to\nalso suppress any prompts with answer 'no'.\n",
                    "flag": "-q",
                    "long": "--quiet"
                },
                {
                    "name": "-t --test",
                    "content": "Run in test mode. Commands will not update metadata.  This is implemented by disabling\nall metadata writing but nevertheless returning success to the calling function. This\nmay lead to unusual error messages in multi-stage operations if a tool relies on read‐\ning back metadata it believes has changed but hasn't.\n",
                    "flag": "-t",
                    "long": "--test"
                },
                {
                    "name": "-v --verbose",
                    "content": "Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to\nstdout and stderr.\n",
                    "flag": "-v",
                    "long": "--verbose"
                },
                {
                    "name": "--version",
                    "content": "Display version information.\n",
                    "long": "--version"
                },
                {
                    "name": "-y --yes",
                    "content": "Do not prompt for confirmation interactively but always assume the answer yes. Use\nwith extreme caution.  (For automatic no, see -qq.)\n",
                    "flag": "-y",
                    "long": "--yes"
                }
            ]
        },
        "VARIABLES": {
            "content": "LV\nLogical  Volume name.  See lvm(8) for valid names.  An LV positional arg generally in‐\ncludes the VG name and LV name, e.g. VG/LV.\n\nString\nSee the option description for information about the string content.\n\nSize[UNIT]\nSize is an input number that accepts an optional unit.  Input units are always treated\nas base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.\nThe default input unit is specified by letter, followed  by  |UNIT.   UNIT  represents\nother  possible  input  units:  bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is sectors of 512\nbytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.   (This\nshould  not  be  confused  with the output control --units, where capital letters mean\nmultiple of 1000.)\n",
            "subsections": []
        },
        "ENVIRONMENT VARIABLES": {
            "content": "See lvm(8) for information about environment variables used by lvm.  For example, LVMVGNAME\ncan generally be substituted for a required VG parameter.\n",
            "subsections": []
        },
        "NOTES": {
            "content": "To  find  the name of the pvmove LV that was created by an original pvmove /dev/name command,\nuse the command:\nlvs -a -S movepv=/dev/name.\n",
            "subsections": []
        },
        "EXAMPLES": {
            "content": "Continue polling a pvmove operation.",
            "subsections": [
                {
                    "name": "lvm lvpoll --polloperation pvmove vg00/pvmove0",
                    "content": "Abort a pvmove operation."
                },
                {
                    "name": "lvm lvpoll --polloperation pvmove --abort vg00/pvmove0",
                    "content": "Continue polling a mirror conversion."
                },
                {
                    "name": "lvm lvpoll --polloperation convert vg00/lvmirror",
                    "content": "Continue mirror repair.\nlvm lvpoll --polloperation convert vg/damagedmirror --handlemissingpvs\n\nContinue snapshot merge.\nlvm lvpoll --polloperation merge vg/snapshotold\n\nContinue thin snapshot merge.\nlvm lvpoll --polloperation mergethin vg/thinsnapshot\n"
                }
            ]
        },
        "SEE ALSO": {
            "content": "lvm(8) lvm.conf(5) lvmconfig(8)\n\npvchange(8) pvck(8) pvcreate(8) pvdisplay(8) pvmove(8) pvremove(8)  pvresize(8)  pvs(8)  pvs‐‐\ncan(8)\n\nvgcfgbackup(8)  vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8) vg‐‐\nexport(8) vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8)  vgre‐‐\nmove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)\n\nlvcreate(8)  lvchange(8)  lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8) lvremove(8) lvre‐‐\nname(8) lvresize(8) lvs(8) lvscan(8)\n\nlvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)\n\ndmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)\n\nlvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)\n\n\n\nLVM TOOLS 2.03.11(2) (2021-01-08)                 8                                      LVM(LVPOLL)",
            "subsections": []
        }
    },
    "summary": "lvm lvpoll - Continue already initiated poll operation on a logical volume",
    "flags": [
        {
            "flag": "",
            "long": "--abort",
            "arg": null,
            "description": "Stop processing a poll operation in lvmpolld."
        },
        {
            "flag": "-A",
            "long": "--autobackup",
            "arg": null,
            "description": "Specifies if metadata should be backed up automatically after a change. Enabling this is strongly advised! See vgcfgbackup(8) for more information. --commandprofile String The command profile to use for command configuration. See lvm.conf(5) for more infor‐ mation about profiles. --config String Config settings for the command. These override lvm.conf settings. The String arg uses the same format as lvm.conf, or may use section/field syntax. See lvm.conf(5) for more information about config."
        },
        {
            "flag": "-d",
            "long": "--debug",
            "arg": null,
            "description": "Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). --driverloaded y|n If set to no, the command will not attempt to use device-mapper. For testing and de‐ bugging."
        },
        {
            "flag": "",
            "long": "--handlemissingpvs",
            "arg": null,
            "description": "Allows a polling operation to continue when PVs are missing, e.g. for repairs due to faulty devices."
        },
        {
            "flag": "-h",
            "long": "--help",
            "arg": null,
            "description": "Display help text."
        },
        {
            "flag": "-i",
            "long": "--interval",
            "arg": null,
            "description": "Report progress at regular intervals. --lockopt String Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more informa‐ tion."
        },
        {
            "flag": "",
            "long": "--longhelp",
            "arg": null,
            "description": "Display long help text."
        },
        {
            "flag": "",
            "long": "--nolocking",
            "arg": null,
            "description": "Disable locking. --polloperation pvmove|convert|merge|mergethin The command to perform from lvmpolld. --profile String An alias for --commandprofile or --metadataprofile, depending on the command."
        },
        {
            "flag": "-q",
            "long": "--quiet",
            "arg": null,
            "description": "Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer 'no'."
        },
        {
            "flag": "-t",
            "long": "--test",
            "arg": null,
            "description": "Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on read‐ ing back metadata it believes has changed but hasn't."
        },
        {
            "flag": "-v",
            "long": "--verbose",
            "arg": null,
            "description": "Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr."
        },
        {
            "flag": "",
            "long": "--version",
            "arg": null,
            "description": "Display version information."
        },
        {
            "flag": "-y",
            "long": "--yes",
            "arg": null,
            "description": "Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see -qq.)"
        }
    ],
    "examples": [
        "Continue polling a pvmove operation.",
        "Abort a pvmove operation.",
        "Continue polling a mirror conversion.",
        "Continue mirror repair.",
        "lvm lvpoll --polloperation convert vg/damagedmirror --handlemissingpvs",
        "Continue snapshot merge.",
        "lvm lvpoll --polloperation merge vg/snapshotold",
        "Continue thin snapshot merge.",
        "lvm lvpoll --polloperation mergethin vg/thinsnapshot"
    ],
    "see_also": [
        {
            "name": "lvm",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm/8/json"
        },
        {
            "name": "lvm.conf",
            "section": "5",
            "url": "https://www.chedong.com/phpMan.php/man/lvm.conf/5/json"
        },
        {
            "name": "lvmconfig",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmconfig/8/json"
        },
        {
            "name": "pvchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvchange/8/json"
        },
        {
            "name": "pvck",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvck/8/json"
        },
        {
            "name": "pvcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvcreate/8/json"
        },
        {
            "name": "pvdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvdisplay/8/json"
        },
        {
            "name": "pvmove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvmove/8/json"
        },
        {
            "name": "pvremove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvremove/8/json"
        },
        {
            "name": "pvresize",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvresize/8/json"
        },
        {
            "name": "pvs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvs/8/json"
        },
        {
            "name": "can",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/can/8/json"
        },
        {
            "name": "vgcfgbackup",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcfgbackup/8/json"
        },
        {
            "name": "vgcfgrestore",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcfgrestore/8/json"
        },
        {
            "name": "vgchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgchange/8/json"
        },
        {
            "name": "vgck",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgck/8/json"
        },
        {
            "name": "vgcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcreate/8/json"
        },
        {
            "name": "vgconvert",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgconvert/8/json"
        },
        {
            "name": "vgdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgdisplay/8/json"
        },
        {
            "name": "export",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/export/8/json"
        },
        {
            "name": "vgextend",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgextend/8/json"
        },
        {
            "name": "vgimport",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgimport/8/json"
        },
        {
            "name": "vgimportclone",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgimportclone/8/json"
        },
        {
            "name": "vgmerge",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgmerge/8/json"
        },
        {
            "name": "vgmknodes",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgmknodes/8/json"
        },
        {
            "name": "vgreduce",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgreduce/8/json"
        },
        {
            "name": "move",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/move/8/json"
        },
        {
            "name": "vgrename",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgrename/8/json"
        },
        {
            "name": "vgs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgs/8/json"
        },
        {
            "name": "vgscan",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgscan/8/json"
        },
        {
            "name": "vgsplit",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgsplit/8/json"
        },
        {
            "name": "lvcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvcreate/8/json"
        },
        {
            "name": "lvchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvchange/8/json"
        },
        {
            "name": "lvconvert",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvconvert/8/json"
        },
        {
            "name": "lvdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvdisplay/8/json"
        },
        {
            "name": "lvextend",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvextend/8/json"
        },
        {
            "name": "lvreduce",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvreduce/8/json"
        },
        {
            "name": "lvremove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvremove/8/json"
        },
        {
            "name": "name",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/name/8/json"
        },
        {
            "name": "lvresize",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvresize/8/json"
        },
        {
            "name": "lvs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvs/8/json"
        },
        {
            "name": "lvscan",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvscan/8/json"
        },
        {
            "name": "lvm-fullreport",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm-fullreport/8/json"
        },
        {
            "name": "lvm2-activation-generator",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm2-activation-generator/8/json"
        },
        {
            "name": "blkdeactivate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/blkdeactivate/8/json"
        },
        {
            "name": "lvmdump",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmdump/8/json"
        },
        {
            "name": "dmeventd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/dmeventd/8/json"
        },
        {
            "name": "lvmpolld",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmpolld/8/json"
        },
        {
            "name": "lvmlockd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmlockd/8/json"
        },
        {
            "name": "lvmlockctl",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmlockctl/8/json"
        },
        {
            "name": "cmirrord",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/cmirrord/8/json"
        },
        {
            "name": "lvmdbusd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmdbusd/8/json"
        },
        {
            "name": "lvmsystemid",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmsystemid/7/json"
        },
        {
            "name": "lvmreport",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmreport/7/json"
        },
        {
            "name": "lvmraid",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmraid/7/json"
        },
        {
            "name": "lvmthin",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmthin/7/json"
        },
        {
            "name": "lvmcache",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmcache/7/json"
        }
    ]
}