# ftp - Internet file transfer program - man(1) - [phpMan] > **TLDR:** Tools to interact with a server via File Transfer Protocol. > - Connect to an FTP server and run in interactive mode: `ftp {{ftp.example.com}}` - Connect to an FTP server specifying its IP address and port: `ftp {{ip_address}} {{port}}` - [Interactive] Switch to binary transfer mode (graphics, compressed files, etc.): `binary` - [Interactive] Transfer multiple files without prompting for confirmation on every file: `prompt off` - [Interactive] Download multiple files (`glob` expression): `mget {{*.png}}` - [Interactive] Upload multiple files (`glob` expression): `mput {{*.zip}}` - [Interactive] Delete multiple files on the remote server: `mdelete {{*.txt}}` - [Interactive] Rename a file on the remote server: `rename {{original_filename}} {{new_filename}}` *Source: tldr-pages* --- [_TNFTP_(1)](https://www.chedong.com/phpMan.php/man/TNFTP/1/markdown) General Commands Manual [_TNFTP_(1)](https://www.chedong.com/phpMan.php/man/TNFTP/1/markdown) ## NAME tnftp — Internet file transfer program ## SYNOPSIS **tnftp **[**-46AadefginpRtVv?**] [**-N _**netrc_] [**-o _**output_] [**-P _**port_] [**-q _**quittime_] [**-r _**retry_] [**-s _**srcaddr_] [**-T _**dir_**,_**max_[**,_**inc_]] [**-x _**xfersize_] [[_user_**@**]_host_ [_port_]] [[_user_**@**]_host_**:**[_path_][**/**]] [**file:///_**path_] [**ftp://**[_user_[**:_**password_]**@**]_host_[**:_**port_]**/_**path_[**/**][**;type=_**type_]] [**http://**[_user_[**:_**password_]**@**]_host_[**:_**port_]**/_**path_] [**https://**[_user_[**:_**password_]**@**]_host_[**:_**port_]**/_**path_] _..._ **tnftp -u _**url_ _file_ _..._ ## DESCRIPTION **tnftp **is the user interface to the Internet standard File Transfer Protocol. The program al‐ lows a user to transfer files to and from a remote network site. The last five arguments will fetch a file using the FTP or HTTP protocols, or by direct copy‐ ing, into the current directory. This is ideal for scripts. Refer to “AUTO-FETCHING FILES” below for more information. Options may be specified at the command line, or to the command interpreter. ### -4 ### -6 ### -A fall back to active mode if passive is not supported by the server. This option causes **tnftp **to always use an active connection. It is only useful for connect‐ ing to very old servers that do not implement passive mode properly. ### -a stead. ### -d ### -e ### -f ### -g ### -i ### -N _ ### -n auto-fetch transfers. If auto-login is enabled, **tnftp **will check the _.netrc_ (see below) file in the user's home directory for an entry describing an account on the remote machine. If no entry exists, **tnftp **will prompt for the remote machine login name (default is the user identity on the local machine), and, if neces‐ sary, prompt for a password and an account with which to login. To override the auto-login for auto-fetch transfers, specify the username (and optionally, password) as appropriate. ### -o _ ing to the “FILE NAMING CONVENTIONS” below. If _output_ is not ‘**-**’ or doesn't start with ‘**|**’, then only the first file specified will be retrieved into _output_; all other files will be retrieved into the basename of their remote name. ### -P _ ### -p This option has been deprecated as **tnftp **now tries to use passive mode by de‐ fault, falling back to active mode if the server does not support passive connec‐ tions. ### -q _ Quit if the connection has stalled for _quittime_ seconds. ### -R ### -r _ ### -s _ ### -t ### -T _ Set the maximum transfer rate for _direction_ to _maximum_ bytes/second, and if spec‐ ified, the increment to _increment_ bytes/second. Refer to **rate **for more informa‐ tion. ### -u _ Upload files on the command line to _url_ where _url_ is one of the ‘ftp://’ URL types as supported by auto-fetch (with an optional target filename for single file uploads), and _file_ is one or more local files to be uploaded. ### -V a terminal. ### -v in the case of **progress**, **tnftp **is the foreground process). Forces **tnftp **to show all responses from the remote server, as well as report on data transfer statis‐ tics. ### -x _ Set the size of the socket send and receive buffers to _xfersize_. Refer to **xferbuf **for more information. **-? **Display help to stdout, and exit. The client host with which **tnftp **is to communicate may be specified on the command line. If this is done, **tnftp **will immediately attempt to establish a connection to an FTP server on that host; otherwise, **tnftp **will enter its command interpreter and await instructions from the user. When **tnftp **is awaiting commands from the user the prompt ‘ftp>’ is provided to the user. The following commands are recognized by **tnftp**: **! **[_command_ [_args_]] Invoke an interactive shell on the local machine. If there are arguments, the first is taken to be a command to execute directly, with the rest of the argu‐ ments as its arguments. **$ _**macro-name_ [_args_] Execute the macro _macro-name_ that was defined with the **macdef **command. Arguments are passed to the macro unglobbed. **account **[_passwd_] Supply a supplemental password required by a remote system for access to re‐ sources once a login has been successfully completed. If no argument is in‐ cluded, the user will be prompted for an account password in a non-echoing input mode. **append _**local-file_ [_remote-file_] Append a local file to a file on the remote machine. If _remote-file_ is left un‐ specified, the local file name is used in naming the remote file after being al‐ tered by any **ntrans **or **nmap **setting. File transfer uses the current settings for **type**, **format**, **mode**, and **structure**. **ascii **Set the file transfer **type **to network ASCII. This is the default type. **bell **Arrange that a bell be sounded after each file transfer command is completed. **binary **Set the file transfer **type **to support binary image transfer. **bye **Terminate the FTP session with the remote server and exit **tnftp**. An end of file will also terminate the session and exit. **case **Toggle remote computer file name case mapping during **get**, **mget **and **mput **commands. When **case **is on (default is off), remote computer file names with all letters in upper case are written in the local directory with the letters mapped to lower case. **cd _**remote-directory_ Change the working directory on the remote machine to _remote-directory_. **cdup **Change the remote machine working directory to the parent of the current remote machine working directory. **chmod _**mode_ _remote-file_ Change the permission modes of the file _remote-file_ on the remote system to _mode_. **close **Terminate the FTP session with the remote server, and return to the command in‐ terpreter. Any defined macros are erased. **cr **Toggle carriage return stripping during ascii type file retrieval. Records are denoted by a carriage return/linefeed sequence during ascii type file transfer. When **cr **is on (the default), carriage returns are stripped from this sequence to conform with the Unix single linefeed record delimiter. Records on non-Unix re‐ mote systems may contain single linefeeds; when an ascii type transfer is made, these linefeeds may be distinguished from a record delimiter only when **cr **is off. **debug **[_debug-value_] Toggle debugging mode. If an optional _debug-value_ is specified it is used to set the debugging level. When debugging is on, **tnftp **prints each command sent to the remote machine, preceded by the string ‘-->’. **delete _**remote-file_ Delete the file _remote-file_ on the remote machine. **dir **[_remote-path_ [_local-file_]] Print a listing of the contents of a directory on the remote machine. The list‐ ing includes any system-dependent information that the server chooses to include; for example, most Unix systems will produce output from the command ‘ls -l’. If _remote-path_ is left unspecified, the current working directory is used. If in‐ teractive prompting is on, **tnftp **will prompt the user to verify that the last ar‐ gument is indeed the target local file for receiving **dir **output. If no local file is specified, or if _local-file_ is ‘**-**’, the output is sent to the terminal. **disconnect **A synonym for **close**. **edit **Toggle command line editing, and context sensitive command and file completion. This is automatically enabled if input is from a terminal, and disabled other‐ wise. **epsv**, **epsv4**, **epsv6** Toggle the use of the extended EPSV and EPRT commands on all IP, IPv4, and IPv6 connections respectively. First try EPSV/EPRT, and then PASV/PORT. This is en‐ abled by default. If an extended command fails then this option will be tem‐ porarily disabled for the duration of the current connection, or until **epsv**, **epsv4**, or **epsv6 **is executed again. **exit **A synonym for **bye**. **features **Display what features the remote server supports (using the FEAT command). **fget _**localfile_ Retrieve the files listed in _localfile_, which has one line per filename. **form _**format_ Set the file transfer **form **to _format_. The default (and only supported) format is ‘non-print’. **ftp _**host_ [_port_] A synonym for **open**. **gate **[_host_ [_port_]] Toggle gate-ftp mode, which used to connect through the TIS FWTK and Gauntlet FTP proxies. This will not be permitted if the gate-ftp server hasn't been set (either explicitly by the user, or from the FTPSERVER environment variable). If _host_ is given, then gate-ftp mode will be enabled, and the gate-ftp server will be set to _host_. If _port_ is also given, that will be used as the port to connect to on the gate-ftp server. **get _**remote-file_ [_local-file_] Retrieve the _remote-file_ and store it on the local machine. If the local file name is not specified, it is given the same name it has on the remote machine, subject to alteration by the current **case**, **ntrans**, and **nmap **settings. The cur‐ rent settings for **type**, **form**, **mode**, and **structure **are used while transferring the file. **glob **Toggle filename expansion for **mdelete**, **mget**, **mput**, and **mreget**. If globbing is turned off with **glob**, the file name arguments are taken literally and not ex‐ panded. Globbing for **mput **is done as in [_csh_(1)](https://www.chedong.com/phpMan.php/man/csh/1/markdown). For **mdelete**, **mget**, and **mreget**, each remote file name is expanded separately on the remote machine and the lists are not merged. Expansion of a directory name is likely to be different from ex‐ pansion of the name of an ordinary file: the exact result depends on the foreign operating system and FTP server, and can be previewed by doing ‘**mls remote-files** **-**’. Note: **mget**, **mput **and **mreget **are not meant to transfer entire directory sub‐ trees of files. That can be done by transferring a [_tar_(1)](https://www.chedong.com/phpMan.php/man/tar/1/markdown) archive of the subtree (in binary mode). **hash **[_size_] Toggle hash-sign (‘#’) printing for each data block transferred. The size of a data block defaults to 1024 bytes. This can be changed by specifying _size_ in bytes. Enabling **hash **disables **progress**. **help **[_command_] Print an informative message about the meaning of _command_. If no argument is given, **tnftp **prints a list of the known commands. **idle **[_seconds_] Set the inactivity timer on the remote server to _seconds_ seconds. If _seconds_ is omitted, the current inactivity timer is printed. **image **A synonym for **binary**. **lcd **[_directory_] Change the working directory on the local machine. If no _directory_ is specified, the user's home directory is used. **less _**file_ A synonym for **page**. **lpage _**local-file_ Display _local-file_ with the program specified by the **set pager **option. **lpwd **Print the working directory on the local machine. **ls **[_remote-path_ [_local-file_]] A synonym for **dir**. **macdef _**macro-name_ Define a macro. Subsequent lines are stored as the macro _macro-name_; a null line (consecutive newline characters in a file or carriage returns from the terminal) terminates macro input mode. There is a limit of 16 macros and 4096 total char‐ acters in all defined macros. Macro names can be a maximum of 8 characters. Macros are only applicable to the current session they are defined within (or if defined outside a session, to the session invoked with the next **open **command), and remain defined until a **close **command is executed. To invoke a macro, use the **$ **command (see above). The macro processor interprets ‘$’ and ‘\’ as special characters. A ‘$’ followed by a number (or numbers) is replaced by the corresponding argument on the macro invocation command line. A ‘$’ followed by an ‘i’ signals the macro processor that the executing macro is to be looped. On the first pass ‘$i’ is replaced by the first argument on the macro invocation command line, on the second pass it is replaced by the second argument, and so on. A ‘\’ followed by any character is replaced by that character. Use the ‘\’ to prevent special treatment of the ‘$’. **mdelete **[_remote-files_] Delete the _remote-files_ on the remote machine. **mdir _**remote-files_ _local-file_ Like **dir**, except multiple remote files may be specified. If interactive prompt‐ ing is on, **tnftp **will prompt the user to verify that the last argument is indeed the target local file for receiving **mdir **output. **mget _**remote-files_ Expand the _remote-files_ on the remote machine and do a **get **for each file name thus produced. See **glob **for details on the filename expansion. Resulting file names will then be processed according to **case**, **ntrans**, and **nmap **settings. Files are transferred into the local working directory, which can be changed with **lcd** _directory_; new local directories can be created with **! mkdir _**directory_. **mkdir _**directory-name_ Make a directory on the remote machine. **mls _**remote-files_ _local-file_ Like **ls**, except multiple remote files may be specified, and the _local-file_ must be specified. If interactive prompting is on, **tnftp **will prompt the user to ver‐ ify that the last argument is indeed the target local file for receiving **mls **out‐ put. **mlsd **[_remote-path_] Display the contents of _remote-path_ (which should default to the current directory if not given) in a machine-parsable form, using MLSD. The format of display can be changed with ‘**remopts mlst _**..._’. **mlst **[_remote-path_] Display the details about _remote-path_ (which should default to the current directory if not given) in a machine-parsable form, using MLST. The format of display can be changed with ‘**remopts mlst _**..._’. **mode _**mode-name_ Set the file transfer **mode **to _mode-name_. The default (and only supported) mode is ‘stream’. **modtime _**remote-file_ Show the last modification time of the file on the remote machine, in **RFC 2822** format. **more _**file_ A synonym for **page**. **mput _**local-files_ Expand wild cards in the list of local files given as arguments and do a **put **for each file in the resulting list. See **glob **for details of filename expansion. Resulting file names will then be processed according to **ntrans **and **nmap **set‐ tings. **mreget _**remote-files_ As per **mget**, but performs a **reget **instead of **get**. **msend _**local-files_ A synonym for **mput**. **newer _**remote-file_ [_local-file_] Get the file only if the modification time of the remote file is more recent that the file on the current system. If the file does not exist on the current sys‐ tem, the remote file is considered **newer**. Otherwise, this command is identical to **get**. **nlist **[_remote-path_ [_local-file_]] A synonym for **ls**. **nmap **[_inpattern_ _outpattern_] Set or unset the filename mapping mechanism. If no arguments are specified, the filename mapping mechanism is unset. If arguments are specified, remote file‐ names are mapped during **mput **commands and **put **commands issued without a specified remote target filename. If arguments are specified, local filenames are mapped during **mget **commands and **get **commands issued without a specified local target filename. This command is useful when connecting to a non-Unix remote computer with different file naming conventions or practices. The mapping follows the pattern set by _inpattern_ and _outpattern_. _inpattern_ is a template for incoming filenames (which may have already been processed according to the **ntrans **and **case **settings). Variable templating is ac‐ complished by including the sequences ‘$1’, ‘$2’, ..., ‘$9’ in _inpattern_. Use ‘\’ to prevent this special treatment of the ‘$’ character. All other characters are treated literally, and are used to determine the **nmap **[_inpattern_] variable values. For example, given _inpattern_ ‘$1.$2’ and the remote file name ‘mydata.data’, ‘$1’ would have the value ‘mydata’, and ‘$2’ would have the value ‘data’. The _outpattern_ determines the resulting mapped filename. The sequences ‘$1’, ‘$2’, ..., ‘$9’ are replaced by any value resulting from the _inpattern_ template. The sequence ‘$0’ is replaced by the original filename. Additionally, the se‐ quence **[_**seq1_**,_**seq2_**] **is replaced by _seq1_ if _seq1_ is not a null string; otherwise it is replaced by _seq2_. For example, the command **nmap $1.$2.$3 [$1,$2].[$2,file]** would yield the output filename ‘myfile.data’ for input filenames ‘myfile.data’ and ‘myfile.data.old’, ‘myfile.file’ for the input filename ‘myfile’, and ‘myfile.myfile’ for the input filename ‘.myfile’. Spaces may be included in _outpattern_, as in the example: **nmap $1 sed s/ *$// > $1** Use the ‘\’ character to prevent special treatment of the ‘$’, ‘[’, ‘]’, and ‘,’ characters. **ntrans **[_inchars_ [_outchars_]] Set or unset the filename character translation mechanism. If no arguments are specified, the filename character translation mechanism is unset. If arguments are specified, characters in remote filenames are translated during **mput **commands and **put **commands issued without a specified remote target filename. If arguments are specified, characters in local filenames are translated during **mget **commands and **get **commands issued without a specified local target filename. This command is useful when connecting to a non-Unix remote computer with different file nam‐ ing conventions or practices. Characters in a filename matching a character in _inchars_ are replaced with the corresponding character in _outchars_. If the char‐ acter's position in _inchars_ is longer than the length of _outchars_, the character is deleted from the file name. **open _**host_ [_port_] Establish a connection to the specified _host_ FTP server. An optional port number may be supplied, in which case, **tnftp **will attempt to contact an FTP server at that port. If the **set auto-login **option is on (default), **tnftp **will also attempt to automatically log the user in to the FTP server (see below). **page _**file_ Retrieve **file **and display with the program specified by the **set pager **option. **passive **[**auto**] Toggle passive mode (if no arguments are given). If **auto **is given, act as if FTPMODE is set to ‘auto’. If passive mode is turned on (default), **tnftp **will send a PASV command for all data connections instead of a PORT command. The PASV command requests that the remote server open a port for the data connection and return the address of that port. The remote server listens on that port and the client connects to it. When using the more traditional PORT command, the client listens on a port and sends that address to the remote server, who connects back to it. Passive mode is useful when using **tnftp **through a gateway router or host that controls the directionality of traffic. (Note that though FTP servers are required to support the PASV command by **RFC 1123**, some do not.) **pdir **[_remote-path_] Perform **dir **[_remote-path_], and display the result with the program specified by the **set pager **option. **pls **[_remote-path_] Perform **ls **[_remote-path_], and display the result with the program specified by the **set pager **option. **pmlsd **[_remote-path_] Perform **mlsd **[_remote-path_], and display the result with the program specified by the **set pager **option. **preserve **Toggle preservation of modification times on retrieved files. **progress **Toggle display of transfer progress bar. The progress bar will be disabled for a transfer that has _local-file_ as ‘**-**’ or a command that starts with ‘|’. Refer to “FILE NAMING CONVENTIONS” for more information. Enabling **progress **disables **hash**. **prompt **Toggle interactive prompting. Interactive prompting occurs during multiple file transfers to allow the user to selectively retrieve or store files. If prompting is turned off (default is on), any **mget **or **mput **will transfer all files, and any **mdelete **will delete all files. When prompting is on, the following commands are available at a prompt: **a **Answer ‘yes’ to the current file, and automatically answer ‘yes’ to any remaining files for the current command. **n **Answer ‘no’, and do not transfer the file. **p **Answer ‘yes’ to the current file, and turn off prompt mode (as if **prompt off **had been given). **q **Terminate the current operation. **y **Answer ‘yes’, and transfer the file. **? **Display a help message. Any other response will answer ‘yes’ to the current file. **proxy _**ftp-command_ Execute an FTP command on a secondary control connection. This command allows simultaneous connection to two remote FTP servers for transferring files between the two servers. The first **proxy **command should be an **open**, to establish the secondary control connection. Enter the command ‘**proxy ?**’ to see other FTP com‐ mands executable on the secondary connection. The following commands behave dif‐ ferently when prefaced by **proxy**: **open **will not define new macros during the auto- login process, **close **will not erase existing macro definitions, **get **and **mget** transfer files from the host on the primary control connection to the host on the secondary control connection, and **put**, **mput**, and **append **transfer files from the host on the secondary control connection to the host on the primary control con‐ nection. Third party file transfers depend upon support of the FTP protocol PASV command by the server on the secondary control connection. **put _**local-file_ [_remote-file_] Store a local file on the remote machine. If _remote-file_ is left unspecified, the local file name is used after processing according to any **ntrans **or **nmap **set‐ tings in naming the remote file. File transfer uses the current settings for **type**, **format**, **mode**, and **structure**. **pwd **Print the name of the current working directory on the remote machine. **quit **A synonym for **bye**. **quote **[_arg_ _..._] The arguments specified are sent, verbatim, to the remote FTP server. **rate _**direction_ [_maximum_ [_increment_]] Throttle the maximum transfer rate to _maximum_ bytes/second. If _maximum_ is 0, disable the throttle. _direction_ may be one of: **all **Both directions. **get **Incoming transfers. **put **Outgoing transfers. _maximum_ can be modified on the fly by _increment_ bytes (default: 1024) each time a given signal is received: SIGUSR1 Increment _maximum_ by _increment_ bytes. SIGUSR2 Decrement _maximum_ by _increment_ bytes. The result must be a posi‐ tive number. If _maximum_ is not supplied, the current throttle rates are displayed. Note: **rate **is not yet implemented for ascii mode transfers. **rcvbuf _**size_ Set the size of the socket receive buffer to _size_. **recv _**remote-file_ [_local-file_] A synonym for **get**. **reget _**remote-file_ [_local-file_] **reget **acts like **get**, except that if _local-file_ exists and is smaller than _remote-file_, _local-file_ is presumed to be a partially transferred copy of _remote-file_ and the transfer is continued from the apparent point of failure. This command is useful when transferring very large files over networks that are prone to dropping connections. **remopts _**command_ [_command-options_] Set options on the remote FTP server for _command_ to _command-options_ (whose absence is handled on a command-specific basis). Remote FTP commands known to support options include: MLST (used for MLSD and MLST). **rename **[_from_ [_to_]] Rename the file _from_ on the remote machine, to the file _to_. **reset **Clear reply queue. This command re-synchronizes command/reply sequencing with the remote FTP server. Resynchronization may be necessary following a violation of the FTP protocol by the remote server. **restart _**marker_ Restart the immediately following **get **or **put **at the indicated _marker_. On Unix systems, marker is usually a byte offset into the file. **rhelp **[_command-name_] Request help from the remote FTP server. If a _command-name_ is specified it is supplied to the server as well. **rmdir _**directory-name_ Delete a directory on the remote machine. **rstatus **[_remote-file_] With no arguments, show status of remote machine. If _remote-file_ is specified, show status of _remote-file_ on remote machine. **runique **Toggle storing of files on the local system with unique filenames. If a file al‐ ready exists with a name equal to the target local filename for a **get **or **mget** command, a ‘.1’ is appended to the name. If the resulting name matches another existing file, a ‘.2’ is appended to the original name. If this process contin‐ ues up to ‘.99’, an error message is printed, and the transfer does not take place. The generated unique filename will be reported. Note that **runique **will not affect local files generated from a shell command (see below). The default value is off. **send _**local-file_ [_remote-file_] A synonym for **put**. **sendport **Toggle the use of PORT commands. By default, **tnftp **will attempt to use a PORT command when establishing a connection for each data transfer. The use of PORT commands can prevent delays when performing multiple file transfers. If the PORT command fails, **tnftp **will use the default data port. When the use of PORT com‐ mands is disabled, no attempt will be made to use PORT commands for each data transfer. This is useful for certain FTP implementations which do ignore PORT commands but, incorrectly, indicate they've been accepted. **set **[_option_ _value_] Set _option_ to _value_. If _option_ and _value_ are not given, display all of the op‐ tions and their values. The currently supported options are: **anonpass **Defaults to $FTPANONPASS **ftp_proxy **Defaults to $ftp_proxy. **http_proxy **Defaults to $http_proxy. **https_proxy **Defaults to $https_proxy. **no_proxy **Defaults to $no_proxy. **pager **Defaults to $PAGER. **prompt **Defaults to $FTPPROMPT. **rprompt **Defaults to $FTPRPROMPT. **sslnoverify **Defaults to $FTPSSLNOVERIFY. **site **[_arg_ _..._] The arguments specified are sent, verbatim, to the remote FTP server as a SITE command. **size _**remote-file_ Return size of _remote-file_ on remote machine. **sndbuf _**size_ Set the size of the socket send buffer to _size_. **status **Show the current status of **tnftp**. **struct _**struct-name_ Set the file transfer _structure_ to _struct-name_. The default (and only supported) structure is ‘file’. **sunique **Toggle storing of files on remote machine under unique file names. The remote FTP server must support FTP protocol STOU command for successful completion. The remote server will report unique name. Default value is off. **system **Show the type of operating system running on the remote machine. **tenex **Set the file transfer type to that needed to talk to TENEX machines. **throttle **A synonym for **rate**. **trace **Toggle packet tracing. **type **[_type-name_] Set the file transfer **type **to _type-name_. If no type is specified, the current type is printed. The default type is network ASCII. **umask **[_newmask_] Set the default umask on the remote server to _newmask_. If _newmask_ is omitted, the current umask is printed. **unset _**option_ Unset _option_. Refer to **set **for more information. **usage _**command_ Print the usage message for _command_. **user _**user-name_ [_password_ [_account_]] Identify yourself to the remote FTP server. If the _password_ is not specified and the server requires it, **tnftp **will prompt the user for it (after disabling local echo). If an _account_ field is not specified, and the FTP server requires it, the user will be prompted for it. If an _account_ field is specified, an account com‐ mand will be relayed to the remote server after the login sequence is completed if the remote server did not require it for logging in. Unless **tnftp **is invoked with “auto-login” disabled, this process is done automatically on initial connec‐ tion to the FTP server. **verbose **Toggle verbose mode. In verbose mode, all responses from the FTP server are dis‐ played to the user. In addition, if verbose is on, when a file transfer com‐ pletes, statistics regarding the efficiency of the transfer are reported. By de‐ fault, verbose is on. **xferbuf _**size_ Set the size of the socket send and receive buffers to _size_. **? **[_command_] A synonym for **help**. Command arguments which have embedded spaces may be quoted with quote ‘"’ marks. Commands which toggle settings can take an explicit **on **or **off **argument to force the setting appropriately. Commands which take a byte count as an argument (e.g., **hash**, **rate**, and **xferbuf**) support an optional suffix on the argument which changes the interpretation of the argument. Supported suffixes are: **b **Causes no modification. (Optional) **k **Kilo; multiply the argument by 1024 **m **Mega; multiply the argument by 1048576 **g **Giga; multiply the argument by 1073741824 If **tnftp **receives a SIGINFO (see the **status **argument of [_stty_(1)](https://www.chedong.com/phpMan.php/man/stty/1/markdown)) or SIGQUIT signal whilst a transfer is in progress, the current transfer rate statistics will be written to the standard error output, in the same format as the standard completion message. ## AUTO-FETCHING FILES In addition to standard commands, this version of **tnftp **supports an auto-fetch feature. To enable auto-fetch, simply pass the list of hostnames/files on the command line. The following formats are valid syntax for an auto-fetch element: [_user_**@**]_host_**:**[_path_][**/**] “Classic” FTP format. If _path_ contains a glob character and globbing is enabled, (see **glob**), then the equiva‐ lent of **mget _**path_ is performed. If the directory component of _path_ contains no globbing characters, it is stored lo‐ cally with the name basename (see [_basename_(1)](https://www.chedong.com/phpMan.php/man/basename/1/markdown)) of **path**, in the current directory. Oth‐ erwise, the full remote name is used as the local name, relative to the local root di‐ rectory. **ftp://**[_user_[**:_**password_]**@**]_host_[**:_**port_]**/_**path_[**/**][**;type=_**type_] An FTP URL, retrieved using the FTP protocol if **set ftp_proxy **isn't defined. Other‐ wise, transfer the URL using HTTP via the proxy defined in **set ftp_proxy**. If **set** **ftp_proxy **isn't defined and _user_ is given, login as _user_. In this case, use _password_ if supplied, otherwise prompt the user for one. If a suffix of ‘;type=A’ or ‘;type=I’ is supplied, then the transfer type will take place as ascii or binary (respectively). The default transfer type is binary. In order to be compliant with **RFC 3986**, **tnftp **interprets the _path_ part of an ‘ftp://’ auto-fetch URL as follows: **• **The ‘/’ immediately after the _host_[**:_**port_] is interpreted as a separator before the _path_, and not as part of the _path_ itself. **• **The _path_ is interpreted as a ‘**/**’-separated list of name components. For all but the last such component, **tnftp **performs the equivalent of a **cd **command. For the last path component, **tnftp **performs the equivalent of a **get **command. **• **Empty name components, which result from ‘//’ within the _path_, or from an extra ‘/’ at the beginning of the _path_, will cause the equivalent of a **cd **command without a directory name. This is unlikely to be useful. **• **Any ‘**%_**XX_’ codes (per **RFC 3986**) within the path components are decoded, with _XX_ rep‐ resenting a character code in hexadecimal. This decoding takes place after the _path_ has been split into components, but before each component is used in the equivalent of a **cd **or **get **command. Some often-used codes are ‘%2F’ (which repre‐ sents ‘/’) and ‘%7E’ (which represents ‘~’). The above interpretation has the following consequences: **• **The path is interpreted relative to the default login directory of the specified user or of the ‘anonymous’ user. If the _/_ directory is required, use a leading path of ‘%2F’. If a user's home directory is required (and the remote server supports the syntax), use a leading path of ‘%7E_user_**/**’. For example, to retrieve _/etc/motd_ from ‘localhost’ as the user ‘myname’ with the password ‘mypass’, use ‘ftp://myname:mypass@localhost/%2fetc/motd’ **• **The exact **cd **and **get **commands can be controlled by careful choice of where to use ‘/’ and where to use ‘%2F’ (or ‘%2f’). For example, the following URLs correspond to the equivalents of the indicated commands: **ftp://_**host_**/_**dir1_**/_**dir2_**/_**file_ **cd _**dir1_, **cd _**dir2_, **get _**file_. **ftp://_**host_**/%2F_**dir1_**/_**dir2_**/_**file_ **cd /_**dir1_, **cd _**dir2_, **get _**file_. **ftp://_**host_**/_**dir1_**%2F_**dir2_**/_**file_ **cd _**dir1_**/_**dir2_, **get _**file_. **• **You must have appropriate access permission for each of the intermediate directo‐ ries that is used in the equivalent of a **cd **command. **http://**[_user_[**:_**password_]**@**]_host_[**:_**port_]**/_**path_ An HTTP URL, retrieved using the HTTP protocol. If **set http_proxy **is defined, it is used as a URL to an HTTP proxy server. If HTTP authorization is required to retrieve _path_, and _user_ (and optionally _password_) is in the URL, use them for the first attempt to authenticate. **https://**[_user_[**:_**password_]**@**]_host_[**:_**port_]**/_**path_ An HTTPS URL, retrieved using the HTTPS protocol. If **set https_proxy **is defined, it is used as a URL to an HTTPS proxy server. If HTTPS authorization is required to retrieve _path_, and _user_ (and optionally _password_) is in the URL, use them for the first attempt to authenticate. There is currently no certificate validation and verification. **file:///_**path_ A local URL, copied from _/path_ on the local host. **about:_**topic_ Display information regarding _topic_; no file is retrieved for this auto-fetched ele‐ ment. Supported values include: **about:ftp **Information about **tnftp**. **about:version **The version of **tnftp**. Useful to provide when reporting problems. Unless noted otherwise above, and **-o _**output_ is not given, the file is stored in the current directory as the [_basename_(1)](https://www.chedong.com/phpMan.php/man/basename/1/markdown) of _path_. Note that if a HTTP redirect is received, the fetch is retried using the new target URL supplied by the server, with a corresponding new _path_. Us‐ ing an explicit **-o _**output_ is recommended, to avoid writing to unexpected file names. If a classic format or an FTP URL format has a trailing ‘/’ or an empty _path_ component, then **tnftp **will connect to the site and **cd **to the directory given as the path, and leave the user in interactive mode ready for further input. This will not work if **set ftp_proxy **is being used. Direct HTTP transfers use HTTP 1.1. Proxied FTP and HTTP transfers use HTTP 1.0. If **-R **is given, all auto-fetches that don't go via the FTP or HTTP proxies will be restarted. For FTP, this is implemented by using **reget **instead of **get**. For HTTP, this is implemented by using the ‘Range: bytes=’ HTTP/1.1 directive. If WWW or proxy WWW authentication is required, you will be prompted to enter a username and password to authenticate with. When specifying IPv6 numeric addresses in a URL, you need to surround the address in square brackets. E.g.: ‘ftp://[::1]:21/’. This is because colons are used in IPv6 numeric address as well as being the separator for the port number. ## ABORTING A FILE TRANSFER To abort a file transfer, use the terminal interrupt key (usually Ctrl-C). Sending transfers will be immediately halted. Receiving transfers will be halted by sending an FTP protocol ABOR command to the remote server, and discarding any further data received. The speed at which this is accomplished depends upon the remote server's support for ABOR processing. If the remote server does not support the ABOR command, the prompt will not appear until the re‐ mote server has completed sending the requested file. If the terminal interrupt key sequence is used whilst **tnftp **is awaiting a reply from the re‐ mote server for the ABOR processing, then the connection will be closed. This is different from the traditional behaviour (which ignores the terminal interrupt during this phase), but is considered more useful. ## FILE NAMING CONVENTIONS Files specified as arguments to **tnftp **commands are processed according to the following rules. 1. If the file name ‘**-**’ is specified, the _stdin_ (for reading) or _stdout_ (for writing) is used. 2. If the first character of the file name is ‘|’, the remainder of the argument is inter‐ preted as a shell command. **tnftp **then forks a shell, using [_popen_(3)](https://www.chedong.com/phpMan.php/man/popen/3/markdown) with the argument supplied, and reads (writes) from the stdout (stdin). If the shell command includes spaces, the argument must be quoted; e.g. ‘"| ls -lt"’. A particularly useful example of this mechanism is: ‘dir "" |more’. 3. Failing the above checks, if globbing is enabled, local file names are expanded accord‐ ing to the rules used in the [_csh_(1)](https://www.chedong.com/phpMan.php/man/csh/1/markdown); see the **glob **command. If the **tnftp **command expects a single local file (e.g. **put**), only the first filename generated by the globbing oper‐ ation is used. 4. For **mget **commands and **get **commands with unspecified local file names, the local filename is the remote filename, which may be altered by a **case**, **ntrans**, or **nmap **setting. The resulting filename may then be altered if **runique **is on. 5. For **mput **commands and **put **commands with unspecified remote file names, the remote file‐ name is the local filename, which may be altered by a **ntrans **or **nmap **setting. The re‐ sulting filename may then be altered by the remote server if **sunique **is on. ## FILE TRANSFER PARAMETERS The FTP specification specifies many parameters which may affect a file transfer. The **type** may be one of “ascii”, “image” (binary), “ebcdic”, and “local byte size” (for PDP-10's and PDP-20's mostly). **tnftp **supports the ascii and image types of file transfer, plus local byte size 8 for **tenex **mode transfers. **tnftp **supports only the default values for the remaining file transfer parameters: **mode**, **form**, and **struct**. **THE .netrc FILE** The _.netrc_ file contains login and initialization information used by the auto-login process. It resides in the user's home directory, unless overridden with the **-N _**netrc_ option, or spec‐ ified in the NETRC environment variable. The following tokens are recognized; they may be separated by spaces, tabs, or new-lines: **machine _**name_ Identify a remote machine _name_. The auto-login process searches the _.netrc_ file for a **machine **token that matches the remote machine specified on the **tnftp **command line or as an **open **command argument. Once a match is made, the subsequent _.netrc_ tokens are processed, stopping when the end of file is reached or another **machine** or a **default **token is encountered. **default **This is the same as **machine _**name_ except that **default **matches any name. There can be only one **default **token, and it must be after all **machine **tokens. This is nor‐ mally used as: **default login anonymous password user@site** thereby giving the user an automatic anonymous FTP login to machines not specified in _.netrc_. This can be overridden by using the **-n **flag to disable auto-login. **login _**name_ Identify a user on the remote machine. If this token is present, the auto-login process will initiate a login using the specified _name_. **password _**string_ Supply a password. If this token is present, the auto-login process will supply the specified string if the remote server requires a password as part of the login process. Note that if this token is present in the _.netrc_ file for any user other than _anonymous_, **tnftp **will abort the auto-login process if the _.netrc_ is readable by anyone besides the user. **account _**string_ Supply an additional account password. If this token is present, the auto-login process will supply the specified string if the remote server requires an addi‐ tional account password, or the auto-login process will initiate an ACCT command if it does not. **macdef _**name_ Define a macro. This token functions like the **tnftp macdef **command functions. A macro is defined with the specified name; its contents begin with the next _.netrc_ line and continue until a blank line (consecutive new-line characters) is encoun‐ tered. Like the other tokens in the _.netrc_ file, a **macdef **is applicable only to the **machine **definition preceding it. A **macdef **entry cannot be used by multiple **machine **definitions; rather, it must be defined following each **machine **it is in‐ tended to be used with. If a macro named **init **is defined, it is automatically exe‐ cuted as the last step in the auto-login process. For example, default macdef init epsv4 off followed by a blank line. ## COMMAND LINE EDITING **tnftp **supports interactive command line editing, via the [_editline_(3)](https://www.chedong.com/phpMan.php/man/editline/3/markdown) library. It is enabled with the **edit **command, and is enabled by default if input is from a tty. Previous lines can be recalled and edited with the arrow keys, and other GNU Emacs-style editing keys may be used as well. The [_editline_(3)](https://www.chedong.com/phpMan.php/man/editline/3/markdown) library is configured with a _.editrc_ file — refer to [_editrc_(5)](https://www.chedong.com/phpMan.php/man/editrc/5/markdown) for more in‐ formation. An extra key binding is available to **tnftp **to provide context sensitive command and filename completion (including remote file completion). To use this, bind a key to the [_editline_(3)](https://www.chedong.com/phpMan.php/man/editline/3/markdown) command **ftp-complete**. By default, this is bound to the TAB key. ## COMMAND LINE PROMPT By default, **tnftp **displays a command line prompt of ‘**ftp> **’ to the user. This can be changed with the **set prompt **command. A prompt can be displayed on the right side of the screen (after the command input) with the **set rprompt **command. The following formatting sequences are replaced by the given information: **%/ **The current remote working directory. **%c**[[**0**]_n_], **%.**[[**0**]_n_] The trailing component of the current remote working directory, or _n_ trailing com‐ ponents if a digit _n_ is given. If _n_ begins with ‘0’, the number of skipped compo‐ nents precede the trailing component(s) in the format “**/<_**number_**>_**trailing_” (for ‘%c’) or “**..._**trailing_” (for ‘%.’). **%M **The remote host name. **%m **The remote host name, up to the first dot ‘.’. **%n **The remote user name. **%% **A single percent character ‘%’. ## ENVIRONMENT **tnftp **uses the following environment variables. FTPANONPASS Password to send in an anonymous FTP transfer. Defaults to “**`whoami`@**”. FTPMODE Overrides the default operation mode. Support values are: **active **active mode FTP only **auto **automatic determination of passive or active (this is the default) **gate **gate-ftp mode **passive **passive mode FTP only FTPPROMPT Command-line prompt to use. Defaults to ‘**ftp> **’. Refer to “COMMAND LINE PROMPT” for more information. FTPRPROMPT Command-line right side prompt to use. Defaults to empty string. Refer to “COMMAND LINE PROMPT” for more information. FTPSERVER Host to use as gate-ftp server when **gate **is enabled. FTPSERVERPORT Port to use when connecting to gate-ftp server when **gate **is enabled. Default is port returned by a [_getservbyname_(3)](https://www.chedong.com/phpMan.php/man/getservbyname/3/markdown) lookup of “**ftpgate/tcp**”. FTPUSERAGENT The value to send for the HTTP User-Agent header. FTPSSLNOVERIFY Set to 1 to not verify SSL certificates. HOME For default location of a _.netrc_ file, if one exists. NETRC An alternate location of the _.netrc_ file. PAGER Used by various commands to display files. Defaults to [_more_(1)](https://www.chedong.com/phpMan.php/man/more/1/markdown) if empty or not set. SHELL For default shell. ftp_proxy URL of FTP proxy to use when making FTP URL requests (if not defined, use the standard FTP protocol). See http_proxy for further notes about proxy use. http_proxy URL of HTTP proxy to use when making HTTP URL requests. If proxy authentica‐ tion is required and there is a username and password in this URL, they will automatically be used in the first attempt to authenticate to the proxy. If “unsafe” URL characters are required in the username or password (for exam‐ ple ‘@’ or ‘/’), encode them with **RFC 3986 **‘%_XX_’ encoding. Note that the use of a username and password in ftp_proxy and http_proxy may be incompatible with other programs that use it (such as [_lynx_(1)](https://www.chedong.com/phpMan.php/man/lynx/1/markdown)). _NOTE_: this is not used for interactive sessions, only for command-line fetches. https_proxy URL of HTTPS proxy to use when making HTTPS URL requests. See http_proxy for further notes about proxy use. no_proxy A space or comma separated list of hosts (or domains) for which proxying is not to be used. Each entry may have an optional trailing ‘:_port_’, which re‐ stricts the matching to connections to that port. ## EXTENDED PASSIVE MODE AND FIREWALLS Some firewall configurations do not allow **tnftp **to use extended passive mode. If you find that even a simple **ls **appears to hang after printing a message such as this: **229 Entering Extended Passive Mode (|||58551|)** then you will need to disable extended passive mode with **epsv4 off**. See the above section “The .netrc File” for an example of how to make this automatic. ## SEE ALSO [_getservbyname_(3)](https://www.chedong.com/phpMan.php/man/getservbyname/3/markdown), [_editrc_(5)](https://www.chedong.com/phpMan.php/man/editrc/5/markdown), [_services_(5)](https://www.chedong.com/phpMan.php/man/services/5/markdown), [_ftpd_(8)](https://www.chedong.com/phpMan.php/man/ftpd/8/markdown) ## STANDARDS **tnftp **attempts to be compliant with: **RFC 959 _**File_ _Transfer_ _Protocol_ **RFC 1123 _**Requirements_ _for_ _Internet_ _Hosts_ _-_ _Application_ _and_ _Support_ **RFC 1635 _**How_ _to_ _Use_ _Anonymous_ _FTP_ **RFC 2389 _**Feature_ _negotiation_ _mechanism_ _for_ _the_ _File_ _Transfer_ _Protocol_ **RFC 2428 _**FTP_ _Extensions_ _for_ _IPv6_ _and_ _NATs_ **RFC 2616 _**Hypertext_ _Transfer_ _Protocol_ _--_ _HTTP/1.1_ **RFC 2822 _**Internet_ _Message_ _Format_ **RFC 3659 _**Extensions_ _to_ _FTP_ **RFC 3986 _**Uniform_ _Resource_ _Identifier_ _(URI)_ ## HISTORY The **tnftp **command appeared in 4.2BSD. Various features such as command line editing, context sensitive command and file completion, dynamic progress bar, automatic fetching of files and URLs, modification time preservation, transfer rate throttling, configurable command line prompt, and other enhancements over the standard BSD **tnftp **were implemented in NetBSD 1.3 and later releases by Luke Mewburn ⟨⟩. IPv6 support was added by the WIDE/KAME project (but may not be present in all non-NetBSD versions of this program, depending if the operating system supports IPv6 in a similar manner to KAME). ## BUGS Correct execution of many commands depends upon proper behavior by the remote server. An error in the treatment of carriage returns in the 4.2BSD ascii-mode transfer code has been corrected. This correction may result in incorrect transfers of binary files to and from 4.2BSD servers using the ascii type. Avoid this problem by using the binary image type. **tnftp **assumes that all IPv4 mapped addresses (IPv6 addresses with a form like **::ffff:10.1.1.1**) indicate IPv4 destinations which can be handled by AF_INET sockets. How‐ ever, in certain IPv6 network configurations, this assumption is not true. In such an envi‐ ronment, IPv4 mapped addresses must be passed to AF_INET6 sockets directly. For example, if your site uses a SIIT translator for IPv6-to-IPv4 translation, **tnftp **is unable to support your configuration. Debian February 25, 2023 [_TNFTP_(1)](https://www.chedong.com/phpMan.php/man/TNFTP/1/markdown)