# cryptsetup-luksSuspend - suspends an active device and wipes the key - man(8) - [phpMan]

[_CRYPTSETUP-LUKSSUSPEND_(8)](https://www.chedong.com/phpMan.php/man/CRYPTSETUP-LUKSSUSPEND/8/markdown)               Maintenance Commands               [_CRYPTSETUP-LUKSSUSPEND_(8)](https://www.chedong.com/phpMan.php/man/CRYPTSETUP-LUKSSUSPEND/8/markdown)

## NAME
       cryptsetup-luksSuspend - suspends an active device and wipes the key

## SYNOPSIS
       **cryptsetup _**luksSuspend_ **[<options>] <name>**

## DESCRIPTION
       Suspends an active device (all IO operations will block and accesses to the device will wait
       indefinitely) and wipes the encryption key from kernel memory. Needs kernel 2.6.19 or later.

       While the _luksSuspend_ operation wipes encryption keys from memory, it does not remove
       possible plaintext data in various caches or in-kernel metadata for mounted filesystems.

       After this operation, you have to use _luksResume_ to reinstate the encryption key and unblock
       the device or _close_ to remove the mapped device.

       **<options> **can be [--header, --disable-locks].

       **WARNING: **Never suspend the device on which the cryptsetup binary resides.

## OPTIONS
### --header <device or file storing the LUKS header>
           Use a detached (separated) metadata device or file where the LUKS header is stored. This
           option allows one to store ciphertext and LUKS header on different devices.

           For commands that change the LUKS header (e.g. _luksAddKey_), specify the device or file
           with the LUKS header directly as the LUKS device.

### --disable-locks
           Disable lock protection for metadata on disk. This option is valid only for LUKS2 and
           ignored for other formats.

           **WARNING: **Do not use this option unless you run cryptsetup in a restricted environment
           where locking is impossible to perform (where /run directory cannot be used).

### --batch-mode, -q
           Suppresses all confirmation questions. Use with care!

           If the --verify-passphrase option is not specified, this option also switches off the
           passphrase verification.

### --debug or --debug-json
           Run in debug mode with full diagnostic logs. Debug output lines are always prefixed by **#**.

           If --debug-json is used, additional LUKS2 JSON data structures are printed.

### --version, -V
           Show the program version.

### --usage
           Show short option help.

### --help, -?
           Show help text and default parameters.

## REPORTING BUGS
       Report bugs at **cryptsetup mailing list **<<cryptsetup@lists.linux.dev>> or in **Issues project**
       **section **<<https://gitlab.com/cryptsetup/cryptsetup/-/issues/new>>.

       Please attach output of the failed command with --debug option added.

## SEE ALSO
       **Cryptsetup FAQ **<<https://gitlab.com/cryptsetup/cryptsetup/wikis/FrequentlyAskedQuestions>>

       [**cryptsetup**(8)](https://www.chedong.com/phpMan.php/man/cryptsetup/8/markdown), [**integritysetup**(8)](https://www.chedong.com/phpMan.php/man/integritysetup/8/markdown) and [**veritysetup**(8)](https://www.chedong.com/phpMan.php/man/veritysetup/8/markdown)

## CRYPTSETUP
       Part of **cryptsetup project **<<https://gitlab.com/cryptsetup/cryptsetup/>>.

cryptsetup 2.7.0                             2024-11-14                    [_CRYPTSETUP-LUKSSUSPEND_(8)](https://www.chedong.com/phpMan.php/man/CRYPTSETUP-LUKSSUSPEND/8/markdown)