# cryptsetup-luksChangeKey - change an existing passphrase - man(8) - [phpMan] [_CRYPTSETUP-LUKSCHANGEKEY_(8)](https://www.chedong.com/phpMan.php/man/CRYPTSETUP-LUKSCHANGEKEY/8/markdown) Maintenance Commands [_CRYPTSETUP-LUKSCHANGEKEY_(8)](https://www.chedong.com/phpMan.php/man/CRYPTSETUP-LUKSCHANGEKEY/8/markdown) ## NAME cryptsetup-luksChangeKey - change an existing passphrase ## SYNOPSIS **cryptsetup _**luksChangeKey_ **[] []** ## DESCRIPTION Changes an existing passphrase. The passphrase to be changed must be supplied interactively or via --key-file. The new passphrase can be supplied interactively or in a file given as the positional argument. If a key-slot is specified (via --key-slot), the passphrase for that key-slot must be given and the new passphrase will overwrite the specified key-slot. If no key-slot is specified and there is still a free key-slot, then the new passphrase will be put into a free key-slot before the key-slot containing the old passphrase is purged. If there is no free key-slot, then the key-slot with the old passphrase is overwritten directly. **WARNING: **If a key-slot is overwritten, a media failure during this operation can cause the overwrite to fail after the old passphrase has been wiped and make the LUKS container inaccessible. LUKS2 mitigates that by never overwriting existing keyslot area as long as there’s a free space in keyslots area at least for one more LUKS2 keyslot. **NOTE: **some parameters are effective only if used with LUKS2 format that supports per-keyslot parameters. For LUKS1, PBKDF type and hash algorithm is always the same for all keyslots. ** **can be [--key-file, --keyfile-offset, --keyfile-size, --new-keyfile-offset, --iter-time, --pbkdf, --pbkdf-force-iterations, --pbkdf-memory, --pbkdf-parallel, --new-keyfile-size, --key-slot, --force-password, --hash, --header, --disable-locks, --type, --keyslot-cipher, --keyslot-key-size, --timeout, --verify-passphrase]. ## OPTIONS ### --type Specifies required device type, for more info read _BASIC_ _ACTIONS_ section in [**cryptsetup**(8)](https://www.chedong.com/phpMan.php/man/cryptsetup/8/markdown). **--hash, -h _**_ The specified hash is used for PBKDF2 and AF splitter. ### --verify-passphrase, -y When interactively asking for a passphrase, ask for it twice and complain if both inputs do not match. Ignored on input from file or stdin. **--key-file, -d _**name_ Read the passphrase from file. If the name given is "-", then the passphrase will be read from stdin. In this case, reading will not stop at newline characters. The passphrase supplied via --key-file is always the passphrase for existing keyslot requested by the command. If you want to set a new passphrase via key file, you have to use a positional argument. See section _NOTES_ _ON_ _PASSPHRASE_ _PROCESSING_ in [**cryptsetup**(8)](https://www.chedong.com/phpMan.php/man/cryptsetup/8/markdown) for more information. **--keyfile-offset _**value_ Skip _value_ bytes at the beginning of the key file. **--keyfile-size, -l _**value_ Read a maximum of _value_ bytes from the key file. The default is to read the whole file up to the compiled-in maximum that can be queried with --help. Supplying more data than the compiled-in maximum aborts the operation. This option is useful to cut trailing newlines, for example. If --keyfile-offset is also given, the size count starts after the offset. **--new-keyfile-offset _**value_ Skip _value_ bytes at the start when adding a new passphrase from key file. **--new-keyfile-size _**value_ Read a maximum of _value_ bytes when adding a new passphrase from key file. The default is to read the whole file up to the compiled-in maximum length that can be queried with --help. Supplying more than the compiled in maximum aborts the operation. When --new-keyfile-offset is also given, reading starts after the offset. ### --key-slot, -S <0-N> For LUKS operations that add key material, this option allows you to specify which key slot is selected for the new key. The maximum number of key slots depends on the LUKS version. LUKS1 can have up to 8 key slots. LUKS2 can have up to 32 key slots based on key slot area size and key size, but a valid key slot ID can always be between 0 and 31 for LUKS2. ### --pbkdf Set Password-Based Key Derivation Function (PBKDF) algorithm for LUKS keyslot. The PBKDF can be: _pbkdf2_ (for PBKDF2 according to RFC2898), _argon2i_ for Argon2i or _argon2id_ for Argon2id (see Argon2 <> for more info). For LUKS1, only PBKDF2 is accepted (no need to use this option). The default PBKDF for LUKS2 is set during compilation time and is available in _cryptsetup_ _--help_ output. A PBKDF is used for increasing dictionary and brute-force attack cost for keyslot passwords. The parameters can be time, memory and parallel cost. For PBKDF2, only time cost (number of iterations) applies. For Argon2i/id, there is also memory cost (memory required during the process of key derivation) and parallel cost (number of threads that run in parallel during the key derivation. Note that increasing memory cost also increases time, so the final parameter values are measured by a benchmark. The benchmark tries to find iteration time (_--iter-time_) with required memory cost _--pbkdf-memory_. If it is not possible, the memory cost is decreased as well. The parallel cost _--pbkdf-parallel_ is constant and is checked against available CPU cores. You can see all PBKDF parameters for particular LUKS2 keyslot with [**cryptsetup-luksDump**(8)](https://www.chedong.com/phpMan.php/man/cryptsetup-luksDump/8/markdown) command. **NOTE: **If you do not want to use benchmark and want to specify all parameters directly, use _--pbkdf-force-iterations_ with _--pbkdf-memory_ and _--pbkdf-parallel_. This will override the values without benchmarking. Note it can cause extremely long unlocking time or cause out-of-memory conditions with unconditional process termination. Use only in specific cases, for example, if you know that the formatted device will be used on some small embedded system. **MINIMAL AND MAXIMAL PBKDF COSTS: **For **PBKDF2**, the minimum iteration count is 1000 and maximum is 4294967295 (maximum for 32bit unsigned integer). Memory and parallel costs are unused for PBKDF2. For **Argon2i **and **Argon2id**, minimum iteration count (CPU cost) is 4 and maximum is 4294967295 (maximum for 32bit unsigned integer). Minimum memory cost is 32 KiB and maximum is 4 GiB. (Limited by addressable memory on some CPU platforms.) If the memory cost parameter is benchmarked (not specified by a parameter) it is always in range from 64 MiB to 1 GiB. The parallel cost minimum is 1 and maximum 4 (if enough CPUs cores are available, otherwise it is decreased). ### --iter-time, -i The number of milliseconds to spend with PBKDF passphrase processing. Specifying 0 as parameter selects the compiled-in default. ### --pbkdf-memory Set the memory cost for PBKDF (for Argon2i/id the number represents kilobytes). Note that it is maximal value, PBKDF benchmark or available physical memory can decrease it. This option is not available for PBKDF2. ### --pbkdf-parallel Set the parallel cost for PBKDF (number of threads, up to 4). Note that it is maximal value, it is decreased automatically if CPU online count is lower. This option is not available for PBKDF2. ### --pbkdf-force-iterations Avoid PBKDF benchmark and set time cost (iterations) directly. It can be used for LUKS/LUKS2 device only. See _--pbkdf_ option for more info. ### --timeout, -t The number of seconds to wait before timeout on passphrase input via terminal. It is relevant every time a passphrase is asked. It has no effect if used in conjunction with --key-file. This option is useful when the system should not stall if the user does not input a passphrase, e.g. during boot. The default is a value of 0 seconds, which means to wait forever. ### --header Use a detached (separated) metadata device or file where the LUKS header is stored. This option allows one to store ciphertext and LUKS header on different devices. For commands that change the LUKS header (e.g. _luksAddKey_), specify the device or file with the LUKS header directly as the LUKS device. ### --force-password Do not use password quality checking for new LUKS passwords. This option is ignored if cryptsetup is built without password quality checking support. For more info about password quality check, see the manual page for [**pwquality.conf(5)](https://www.chedong.com/phpMan.php/man/pwquality.conf/5/markdown) **and [**passwdqc.conf(5)](https://www.chedong.com/phpMan.php/man/passwdqc.conf/5/markdown)**. ### --disable-locks Disable lock protection for metadata on disk. This option is valid only for LUKS2 and ignored for other formats. **WARNING: **Do not use this option unless you run cryptsetup in a restricted environment where locking is impossible to perform (where /run directory cannot be used). ### --keyslot-cipher This option can be used to set specific cipher encryption for the LUKS2 keyslot area. ### --keyslot-key-size This option can be used to set specific key size for the LUKS2 keyslot area. ### --batch-mode, -q Suppresses all confirmation questions. Use with care! If the --verify-passphrase option is not specified, this option also switches off the passphrase verification. ### --debug or --debug-json Run in debug mode with full diagnostic logs. Debug output lines are always prefixed by **#**. If --debug-json is used, additional LUKS2 JSON data structures are printed. ### --version, -V Show the program version. ### --usage Show short option help. ### --help, -? Show help text and default parameters. ## REPORTING BUGS Report bugs at **cryptsetup mailing list **<> or in **Issues project** **section **<>. Please attach output of the failed command with --debug option added. ## SEE ALSO **Cryptsetup FAQ **<> [**cryptsetup**(8)](https://www.chedong.com/phpMan.php/man/cryptsetup/8/markdown), [**integritysetup**(8)](https://www.chedong.com/phpMan.php/man/integritysetup/8/markdown) and [**veritysetup**(8)](https://www.chedong.com/phpMan.php/man/veritysetup/8/markdown) ## CRYPTSETUP Part of **cryptsetup project **<>. cryptsetup 2.7.0 2024-11-14 [_CRYPTSETUP-LUKSCHANGEKEY_(8)](https://www.chedong.com/phpMan.php/man/CRYPTSETUP-LUKSCHANGEKEY/8/markdown)