{
    "content": [
        {
            "type": "text",
            "text": "# SVN-BISECT (man)\n\n## NAME\n\nsvn-bisect - Bisect Subversion revisions to find a regression\n\n## SYNOPSIS\n\nsvn-bisect start [goodrev [badrev]]\nsvn-bisect {good|bad} [rev]\nsvn-bisect run command\n\n## DESCRIPTION\n\nsvn-bisect  helps  to automate finding a bug or behavior change in a Subversion working copy.\nGiven an initial “good” revision, with the desired or original behavior, and  a  newer  “bad”\nrevision, with the undesired or modified behavior, svn-bisect will do a binary search through\nthe revision range to find which revision caused the change.\n\n## Sections\n\n- **NAME**\n- **SYNOPSIS** (2 subsections)\n- **DESCRIPTION**\n- **EXAMPLES**\n- **ENVIRONMENT**\n- **FILES**\n- **SEE ALSO**\n- **AUTHOR**\n\nUse structuredContent.sections for detailed options, examples, and full documentation.\n"
        }
    ],
    "structuredContent": {
        "command": "SVN-BISECT",
        "section": "",
        "mode": "man",
        "summary": "svn-bisect - Bisect Subversion revisions to find a regression",
        "synopsis": "svn-bisect start [goodrev [badrev]]\nsvn-bisect {good|bad} [rev]\nsvn-bisect run command",
        "tldr_summary": null,
        "tldr_examples": [],
        "tldr_source": null,
        "flags": [],
        "examples": [
            "Assume you are trying to find which revision between 1250 and 1400 caused the make check com‐",
            "mand to fail.",
            "svn-bisect start 1250 1400",
            "svn-bisect run 'make check'",
            "svn-bisect reset"
        ],
        "see_also": [
            {
                "name": "git-bisect",
                "section": "1",
                "url": "https://www.chedong.com/phpMan.php/man/git-bisect/1/json"
            }
        ],
        "section_outline": [
            {
                "name": "NAME",
                "lines": 2,
                "subsections": []
            },
            {
                "name": "SYNOPSIS",
                "lines": 6,
                "subsections": [
                    {
                        "name": "svn-bisect reset",
                        "lines": 1
                    },
                    {
                        "name": "svn-bisect status",
                        "lines": 1
                    }
                ]
            },
            {
                "name": "DESCRIPTION",
                "lines": 37,
                "subsections": []
            },
            {
                "name": "EXAMPLES",
                "lines": 7,
                "subsections": []
            },
            {
                "name": "ENVIRONMENT",
                "lines": 2,
                "subsections": []
            },
            {
                "name": "FILES",
                "lines": 3,
                "subsections": []
            },
            {
                "name": "SEE ALSO",
                "lines": 2,
                "subsections": []
            },
            {
                "name": "AUTHOR",
                "lines": 6,
                "subsections": []
            }
        ],
        "sections": {
            "NAME": {
                "content": "svn-bisect - Bisect Subversion revisions to find a regression\n",
                "subsections": []
            },
            "SYNOPSIS": {
                "content": "svn-bisect start [goodrev [badrev]]\n\nsvn-bisect {good|bad} [rev]\n\nsvn-bisect run command\n",
                "subsections": [
                    {
                        "name": "svn-bisect reset",
                        "content": ""
                    },
                    {
                        "name": "svn-bisect status",
                        "content": ""
                    }
                ]
            },
            "DESCRIPTION": {
                "content": "svn-bisect  helps  to automate finding a bug or behavior change in a Subversion working copy.\nGiven an initial “good” revision, with the desired or original behavior, and  a  newer  “bad”\nrevision, with the undesired or modified behavior, svn-bisect will do a binary search through\nthe revision range to find which revision caused the change.\n\nsvn-bisect must be initialized in a working copy, with svn-bisect start.  It also needs to be\ngiven  at  least one good revision (the baseline) and one bad revision (known modified behav‐\nior) revision.\n\nSub-commands:\n\nstart  Initializes or reinitializes svn-bisect; optionally takes good and bad revision param‐\neters.\n\ngood rev\n\nbad rev\nTells  svn-bisect  that  a  revision  is good or bad, defining or narrowing the search\nspace.  If not specified, revision defaults to the current  revision  in  the  working\ncopy.   svn-bisect will then update to a revision halfway between the new good and bad\nboundaries.  If this update crosses a point where a branch was created, it switches in\nor out of the branch.\n\nreset  Resets the working copy to the revision and branch where svn-bisect start was run.  In\nthe simple case this is equivalent to rm -r .svn-bisect; svn update, but not if it has\ncrossed  branches,  and  not  if you did not start at the HEAD revision.  In any case,\nsvn-bisect never keeps track of mixed-revision working copies, so do not  use  svn-bi‐‐\nsect in a working copy that will need to be restored to mixed revisions.\n\nstatus Prints a brief status message.\n\nrun command\nRuns  the  bisection  in  a  loop.  You must have already defined initial good and bad\nboundary conditions.  Each iteration through the loop runs command as a shell  command\n(a  single argument, quoted if necessary) on the chosen revision, then marks the revi‐\nsion as good or bad, based on the exit status of command.\n",
                "subsections": []
            },
            "EXAMPLES": {
                "content": "Assume you are trying to find which revision between 1250 and 1400 caused the make check com‐\nmand to fail.\n\nsvn-bisect start 1250 1400\nsvn-bisect run 'make check'\nsvn-bisect reset\n",
                "subsections": []
            },
            "ENVIRONMENT": {
                "content": "SVN    The Subversion command-line program to call (default svn).\n",
                "subsections": []
            },
            "FILES": {
                "content": ".svn-bisect\nThe directory containing state information, removed after a successful bisection.\n",
                "subsections": []
            },
            "SEE ALSO": {
                "content": "git-bisect(1).\n",
                "subsections": []
            },
            "AUTHOR": {
                "content": "Written by Robert Millan and Peter Samuelson, for the Debian Project (but may be used by oth‐\ners).\n\n\n\n2009-10-22                                SVN-BISECT(1)",
                "subsections": []
            }
        }
    }
}