On Apache
Under GNU General Public License
2024-04-20 02:39 @18.222.119.148 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
Sender(3pm) User Contributed Perl Documentation Sender(3pm)
NAME
Mail::Sender - module for sending mails with attachments through an SMTP server
Version 0.8.16
SYNOPSIS
use Mail::Sender;
$sender = new Mail::Sender
{smtp => 'mail.yourdomain.com', from => 'your AT address.com'};
$sender->MailFile({to => 'some AT address.com',
subject => 'Here is the file',
msg => "I'm sending you the list you wanted.",
file => 'filename.txt'});
DESCRIPTION
"Mail::Sender" provides an object oriented interface to sending mails. It doesn't need
any outer program. It connects to a mail server directly from Perl, using Socket.
Sends mails directly from Perl through a socket connection.
new Mail::Sender
new Mail::Sender ([from [,replyto [,to [,smtp [,subject [,headers [,boundary]]]]]]])
new Mail::Sender {[from => 'somebody AT somewhere.com'] , [to => 'else AT nowhere.com'] [...]}
Prepares a sender. This doesn't start any connection to the server. You have to use
"$Sender-"Open> or "$Sender-"OpenMultipart> to start talking to the server.
The parameters are used in subsequent calls to "$Sender-"Open> and
"$Sender-"OpenMultipart>. Each such call changes the saved variables. You can set "smtp",
"from" and other options here and then use the info in all messages.
Parameters
from
""=> the sender's e-mail address
fake_from
""=> the address that will be shown in headers.
If not specified we use the value of "from".
replyto
""=> the reply-to address
to ""=> the recipient's address(es)
This parameter may be either a comma separated list of email addresses or a reference
to a list of addresses.
fake_to
""=> the recipient's address that will be shown in headers. If not specified we use
the value of "to".
If the list of addresses you want to send your message to is long or if you do not
want the recipients to see each other's address set the "fake_to" parameter to some
informative, yet bogus, address or to the address of your mailing/distribution list.
cc ""=> address(es) to send a copy (CC:) to
fake_cc
""=> the address that will be shown in headers.
If not specified we use the value of "cc".
bcc ""=> address(es) to send a copy (BCC: or blind carbon copy). these addresses will not
be visible in the mail!
smtp
""=> the IP or domain address of your SMTP (mail) server
This is the name of your LOCAL mail server, do NOT try to contact directly the
adressee's mailserver! That would be slow and buggy, your script should only pass the
messages to the nearest mail server and leave the rest to it. Keep in mind that the
recipient's server may be down temporarily.
port
""=> the TCP/IP port used form the connection. By default getservbyname('smtp',
'tcp')||25. You should only need to use this option if your mail server waits on a
nonstandard port.
subject
""=> the subject of the message
headers
""=> the additional headers
You may use this parameter to add custon headers into the message. The parameter may
be either a string containing the headers in the right format or a hash containing the
headers and their values.
boundary
""=> the message boundary
You usualy do not have to change this, it might only come in handy if you need to
attach a multipart mail created by Mail::Sender to your message as a single part.
Even in that case any problems are unlikely.
multipart
""=> the MIME subtype for the whole message (Mixed/Related/Alternative)
You may need to change this setting if you want to send a HTML body with some inline
images, or if you want to post the message in plain text as well as HTML
(alternative). See the examples at the end of the docs. You may also use the nickname
"subtype".
Please keep in mind though that it's not currently possible to create nested parts
with Mail::Sender. If you need that level of control you should try MIME::Lite.
ctype
""=> the content type of a single part message
Please do not confuse these two. The 'multipart' parameter is used to specify the
overall content type of a multipart message (for example a HTML document with inlined
images) while ctype is an ordinary content type for a single part message. For example
a HTML mail message without any inlines.
encoding
""=> encoding of a single part message or the body of a multipart message.
If the text of the message contains some extended characters or very long lines you
should use 'encoding => "Quoted-printable"' in the call to Open(), OpenMultipart(),
MailMsg() or MailFile().
Keep in mind that if you use some encoding you should either use SendEnc() or encode
the data yourself !
charset
""=> the charset of the message
client
""=> the name of the client computer.
During the connection you send the mailserver your computer's name. By default
Mail::Sender sends "(gethostbyname 'localhost')[0]". If that is not the address you
need, you can specify a different one.
priority
""=> the message priority number
1 = highest, 2 = high, 3 = normal, 4 = low, 5 = lowest
confirm
""=> whether you request reading or delivery confirmations and to what addresses:
"delivery" - only delivery, to the C<from> address
"reading" - only reading, to the C<from> address
"delivery, reading" - both confirmations, to the C<from> address
"delivery: my.other AT address.com" - only delivery, to my.other AT address.com
...
Keep in mind though that neither of those is guaranteed to work. Some servers/mail
clients do not support this feature and some users/admins may have disabled it. So
it's possible that your mail was delivered and read, but you wount get any
confirmation!
ESMPT
ESMTP => {
NOTIFY => 'SUCCESS,FAILURE,DELAY',
RET => 'HDRS',
ORCPT => 'rfc822;my.other AT address.com',
ENVID => 'iuhsdfobwoe8t237',
}
This option contains data for SMTP extensions, for example it allows you to request
delivery status notifications according to RFC1891.
NOTIFY - to specify the conditions under which a delivery status notification should
be generated. Should be either "NEVER" or a comma separated list of "SUCCESS",
"FAILURE" and "DELAY".
ORCPT - used to convey the "original" (sender-specified) recipient address
RET - to request that Delivery Status Notifications containing an indication of
delivery failure either return the entire contents of a message or only the message
headers. Must be either FULL or HDRS
ENVID - used to propagate an identifier for this message transmission envelope, which
is also known to the sender and will, if present, be returned in any Delivery Status
Notifications issued for this transmission
You do not need to worry about encoding the ORCPT or ENVID parameters.
If the SMTP server you connect to doesn't support this extension, the options will be
ignored.
debug
""=> "/path/to/debug/file.txt"
or
""=> \*FILEHANDLE
or
""=> $FH
All the conversation with the server will be logged to that file or handle. All lines
in the file should end with CRLF (the Windows and Internet format). If even a single
one of them does not, please let me know!
If you pass the path to the log file, Mail::Sender will overwrite it. If you want to
append to the file, you have to open it yourself and pass the filehandle:
open my $DEBUG, ">> /path/to/debug/file.txt"
or die "Can't open the debug file: $!\n"
$sender = new Mail::Sender ({
...
debug => $DEBUG,
});
debug_level
Only taken into account if the "debug" option is specified.
1 - only log the conversation with the server, skip all message data
2 - log the conversation and message headers
3 - log the conversation and the message and part headers
4 - log everything (default)
auth
the SMTP authentication protocol to use to login to the server currently the only ones
supported are LOGIN, PLAIN, CRAM-MD5 and NTLM.
Some protocols have module dependencies. CRAM-MD5 depends on Digest::HMAC_MD5 and NTLM
on Authen::NTLM.
You may add support for other authentication protocols yourself. See below.
authid
the username used to login to the server
authpwd
the password used to login to the server
authdomain
the domain name. Used optionaly by the NTLM authentication.
Other authentication protocols may use other options as well. They should all start
with "auth" though.
Please see the authentication section bellow.
auth_encoded
If set to a true value the LOGIN authentication assumes the authid and authpwd is
already base64 encoded.
keepconnection
If set to a true value causes the Mail::Sender to keep the connection open for several
messages. The connection will be closed if you call the Close() method with a true
value or if you call Open, OpenMultipart, MailMsg or MailFile with the "smtp"
parameter. This means that if you want the object to keep the connection you should
pass the "smtp" either to "new Mail::Sender" or only to the first Open, OpenMultipart,
MailMsg or MailFile!
skip_bad_recipients
If this option is set to false or not specified then Mail::Sender stops trying to send
a message as soon as the first recipient's address fails. If it is set to a true value
Mail::Sender skips the bad addresses and tries to send the message at least to the
good ones. If all addresses are rejected by the server it reports an "All recipients
were rejected" message.
If any addresses were skipped the "$sender->{'skipped_recipients'}" will be a
reference to a hash containing the failed address and the server's response.
createmessageid
This option allows you to overwrite the function that generates the message IDs for
the emails. The function gets the "pure" sender's address as it's only parameter and
is supposed to return a string. See the MessageID subroutine in Mail::Sender.pm.
If you want to specify a message id you can also use the "messageid" parameter for the
Open, OpenMultipart, MailMsg or MailFile methods.
on_errors
This option allows you to affect the way Mail::Sender reports errors.
=> 'die' - raise an exception
=> 'code' - return the negative error code (default)
=> 'undef' - return an undef
$Mail::Sender::Error, $sender->{'error'} and $sender->{'error_msg'} are set in all the
cases.
All methods return the $sender object if they succeed.
P.S.: The die_on_errors option is deprecated. You may still use it, but it may be
removed in future versions!
Return codes
ref to a Mail::Sender object = success
-1 = $smtphost unknown
-2 = socket() failed
-3 = connect() failed
-4 = service not available
-5 = unspecified communication error
-6 = local user $to unknown on host $smtp
-7 = transmission of message failed
-8 = argument $to empty
-9 = no message specified in call to MailMsg or MailFile
-10 = no file name specified in call to SendFile or MailFile
-11 = file not found
-12 = not available in singlepart mode
-13 = site specific error
-14 = connection not established. Did you mean MailFile instead of SendFile?
-15 = no SMTP server specified
-16 = no From: address specified
-17 = authentication protocol not accepted by the server
-18 = login not accepted
-19 = authentication protocol is not implemented
$Mail::Sender::Error contains a textual description of last error.
METHODS
Open
Open([from [, replyto [, to [, smtp [, subject [, headers]]]]]])
Open({[from => "somebody AT somewhere.com"] , [to => "else AT nowhere.com"] [...]})
Opens a new message. If some parameters are unspecified or empty, it uses the parameters
passed to the ""$Sender=new Mail::Sender(...)"";
See "new Mail::Sender" for info about the parameters.
The only additional parameter that may not be specified directly in the "new Mail::Sender"
is messageid. If you set this option then the message will be sent with this Message-ID,
otherwise a new Message ID will be generated out of the sender's address, current
date+time and a random number (or by the function you specified in the "createmessageid"
option).
After the message is sent "$sender-<{messageid}" will contain the Message-ID with which
the message was sent.
Returns ref to the Mail::Sender object if successfull.
OpenMultipart
OpenMultipart([from [, replyto [, to [, smtp [, subject [, headers [, boundary]]]]]]])
OpenMultipart({[from => "somebody AT somewhere.com"] , [to => "else AT nowhere.com"] [...]})
Opens a multipart message. If some parameters are unspecified or empty, it uses the
parameters passed to the "$Sender=new Mail::Sender(...)".
See "new Mail::Sender" for info about the parameters.
Returns ref to the Mail::Sender object if successfull.
MailMsg
MailMsg([from [, replyto [, to [, smtp [, subject [, headers]]]]]], message)
MailMsg({[from => "somebody AT somewhere.com"]
[, to => "else AT nowhere.com"] [...], msg => "Message"})
Sends a message. If a mail in $sender is opened it gets closed and a new mail is created
and sent. $sender is then closed. If some parameters are unspecified or empty, it uses
the parameters passed to the ""$Sender=new Mail::Sender(...)"";
See "new Mail::Sender" for info about the parameters.
The module was made so that you could create an object initialized with all the necesary
options and then send several messages without need to specify the SMTP server and others
each time. If you need to send only one mail using MailMsg() or MailFile() you do not have
to create a named object and then call the method. You may do it like this :
(new Mail::Sender)->MailMsg({smtp => 'mail.company.com', ...});
Returns ref to the Mail::Sender object if successfull.
MailFile
MailFile([from [, replyto [, to [, smtp [, subject [, headers]]]]]], message, file(s))
MailFile({[from => "somebody AT somewhere.com"]
[, to => "else AT nowhere.com"] [...],
msg => "Message", file => "File"})
Sends one or more files by mail. If a mail in $sender is opened it gets closed and a new
mail is created and sent. $sender is then closed. If some parameters are unspecified or
empty, it uses the parameters passed to the ""$Sender=new Mail::Sender(...)"";
The "file" parameter may be a "filename", a "list, of, file, names" or a
\@list_of_file_names.
see "new Mail::Sender" for info about the parameters.
Just keep in mind that parameters like ctype, charset and encoding will be used for the
attached file, not the body of the message. If you want to specify those parameters for
the body you have to use b_ctype, b_charset and b_encoding. Sorry.
Returns ref to the Mail::Sender object if successfull.
Send
Send(@strings)
Prints the strings to the socket. Doesn't add any end-of-line characters. Doesn't encode
the data! You should use "\r\n" as the end-of-line!
UNLESS YOU ARE ABSOLUTELY SURE YOU KNOW WHAT YOU ARE DOING YOU SHOULD USE SendEnc()
INSTEAD!
Returns the object if successfull.
SendLine
SendLine(@strings)
Prints the strings to the socket. Adds the end-of-line character at the end. Doesn't
encode the data! You should use "\r\n" as the end-of-line!
UNLESS YOU ARE ABSOLUTELY SURE YOU KNOW WHAT YOU ARE DOING YOU SHOULD USE SendLineEnc()
INSTEAD!
Returns the object if successfull.
print
Alias to SendEnc().
Keep in mind that you can't write :
print $sender "...";
you have to use
$sender->print("...");
If you want to be able to print into the message as if it was a normal file handle take a
look at "GetHandle"()
SendEnc
SendEnc(@strings)
Prints the strings to the socket. Doesn't add any end-of-line characters.
Encodes the text using the selected encoding (none/Base64/Quoted-printable)
Returns the object if successfull.
SendLineEnc
SendLineEnc(@strings)
Prints the strings to the socket and adds the end-of-line character at the end. Encodes
the text using the selected encoding (none/Base64/Quoted-printable).
Do NOT mix up /Send(Line)?(Ex)?/ and /Send(Line)?Enc/! SendEnc does some buffering
necessary for correct Base64 encoding, and /Send(Ex)?/ is not aware of that!
Usage of /Send(Line)?(Ex)?/ in non xBIT parts not recommended. Using
"Send(encode_base64($string))" may work, but more likely it will not! In particular if
you use several such to create one part, the data is very likely to get crippled.
Returns the object if successfull.
SendEx
SendEx(@strings)
Prints the strings to the socket. Doesn't add any end-of-line characters. Changes all
end-of-lines to "\r\n". Doesn't encode the data!
UNLESS YOU ARE ABSOLUTELY SURE YOU KNOW WHAT YOU ARE DOING YOU SHOULD USE SendEnc()
INSTEAD!
Returns the object if successfull.
SendLineEx
SendLineEx(@strings)
Prints the strings to the socket. Adds an end-of-line character at the end. Changes all
end-of-lines to "\r\n". Doesn't encode the data!
UNLESS YOU ARE ABSOLUTELY SURE YOU KNOW WHAT YOU ARE DOING YOU SHOULD USE SendEnc()
INSTEAD!
Returns the object if successfull.
Part
Part( I<description>, I<ctype>, I<encoding>, I<disposition> [, I<content_id> [, I<msg>]]);
Part( {[description => "desc"], [ctype => "content-type"], [encoding => "..."],
[disposition => "..."], [content_id => "..."], [msg => ...]});
Prints a part header for the multipart message and (if specified) the contents. The
undefined or empty variables are ignored.
description
The title for this part.
ctype
the content type (MIME type) of this part. May contain some other parameters, such as
charset or name.
Defaults to "application/octet-stream".
Since 0.8.00 you may use even "multipart/..." types. Such a multipart part should be
closed by a call to $sender->EndPart($ctype).
...
$sender->Part({ctype => "multipart/related", ...});
$sender->Part({ctype => 'text/html', ...});
$sender->Attach({file => 'some_image.gif', content_id => 'foo', ...});
$sender->EndPart("multipart/related");
...
Please see the examples below.
encoding
the encoding used for this part of message. Eg. Base64, Uuencode, 7BIT ...
Defaults to "7BIT".
disposition
This parts disposition. Eg: 'attachment; filename="send.pl"'.
Defaults to "attachment". If you specify "none" or "", the Content-disposition: line
will not be included in the headers.
content_id
The content id of the part, used in multipart/related. If not specified, the header is
not included.
msg
The content of the part. You do not have to specify the content here, you may use
SendEnc() to add content to the part.
charset
The charset of the part.
Returns the Mail::Sender object if successfull, negative error code if not.
Body
Body([charset [, encoding [, content-type]]]);
Body({charset => '...', encoding => '...', ctype => '...', msg => '...');
Sends the head of the multipart message body. You can specify the charset and the
encoding. Default is "US-ASCII","7BIT",'text/plain'.
If you pass undef or zero as the parameter, this function uses the default value:
Body(0,0,'text/html');
Returns the Mail::Sender object if successfull, negative error code if not. You should
NOT use this method in single part messages, that is, it works after OpenMultipart(), but
has no meaning after Open()!
SendFile
Alias to Attach()
Attach
Attach( I<description>, I<ctype>, I<encoding>, I<disposition>, I<file>);
Attach( { [description => "desc"] , [ctype => "ctype"], [encoding => "encoding"],
[disposition => "disposition"], file => "file"});
Sends a file as a separate part of the mail message. Only in multipart mode.
description
The title for this part.
ctype
the content type (MIME type) of this part. May contain some other parameters, such as
charset or name.
Defaults to "application/octet-stream".
encoding
the encoding used for this part of message. Eg. Base64, Uuencode, 7BIT ...
Defaults to "Base64".
disposition
This parts disposition. Eg: 'attachment; filename="send.pl"'. If you use 'attachment;
filename=*' the * will be replaced by the respective names of the sent files.
Defaults to "attachment; filename=*". If you do not want to include this header use ""
as the value.
file
The name of the file to send or a 'list, of, names' or a
['reference','to','a','list','of','filenames']. Each file will be sent as a separate
part.
Please keep in mind that if you pass a string as this parameter the module will split it
on commas! If your filenames may contain commas and you want to be sure they are sent
correctly you have to use the reference to array format:
file => [ $filename],
content_id
The content id of the message part. Used in multipart/related.
Special values:
"*" => the name of the file
"#" => autoincremented number (starting from 0)
Returns the Mail::Sender object if successfull, negative error code if not.
EndPart
$sender->EndPart($ctype);
Closes a multipart part.
If the $ctype is not present or evaluates to false, only the current SIMPLE part is
closed! Don't do that unless you are really sure you know what you are doing.
It's best to always pass to the ->EndPart() the content type of the corresponding
->Part().
Close
$sender->Close;
$sender->Close(1);
Close and send the email message. If you pass a true value to the method the connection
will be closed even if the "keepconnection" was specified. You should only keep the
connection open if you plan to send another message immediately. And you should not keep
it open for hundreds of emails even if you do send them all in a row.
This method should be called automatically when destructing the object, but you should not
rely on it. If you want to be sure your message WAS processed by the SMTP server you
SHOULD call Close() explicitely.
Returns the Mail::Sender object if successfull, negative error code if not, zero if
$sender was not connected at all. The zero usualy means that the Open/OpenMultipart
failed and you did not test its return value.
Cancel
$sender->Cancel;
Cancel an opened message.
SendFile and other methods may set $sender->{'error'}. In that case "undef $sender" calls
"$sender-">Cancel not "$sender-">Close!!!
Returns the Mail::Sender object if successfull, negative error code if not.
QueryAuthProtocols
@protocols = $sender->QueryAuthProtocols();
@protocols = $sender->QueryAuthProtocols( $smtpserver);
Queryies the server (specified either in the default options for Mail::Sender, the "new
Mail::Sender" command or as a parameter to this method for the authentication protocols it
supports.
GetHandle
Returns a "filehandle" to which you can print the message or file to attach or whatever.
The data you print to this handle will be encoded as necessary. Closing this handle closes
either the message (for single part messages) or the part.
$sender->Open({...});
my $handle = $sender->GetHandle();
print $handle "Hello world.\n"
my ($mday,$mon,$year) = (localtime())[3,4,5];
printf $handle "Today is %04d/%02d/%02d.", $year+1900, $mon+1, $mday;
close $handle;
P.S.: There is a big difference between the handle stored in $sender->{'socket'} and the
handle returned by this function ! If you print something to $sender->{'socket'} it will
be sent to the server without any modifications, encoding, escaping, ... You should NOT
touch the $sender->{'socket'} unless you really really know what you are doing.
FUNCTIONS
GuessCType
$ctype = GuessCType $filename, $filepath;
Guesses the content type based on the filename or the file contents. This function is
used when you attach a file and do not specify the content type. It is not exported by
default!
The builtin version uses the filename extension to guess the type. Currently there are
only a few extensions defined, you may add other extensions this way:
$Mail::Sender::CTypes{'EXT'} = 'content/type';
...
The extension has to be in UPPERCASE and will be matched case sensitively.
The package now includes two addins improving the guesswork. If you "use" one of them in
your script, it replaces the builtin GuessCType() subroutine with a better one:
Mail::Sender::CType::Win32
Win32 only, the content type is read from the registry
Mail::Sender::CType::Ext
any OS, a longer list of extensions from A. Guillaume
ResetGMTdiff
ResetGMTdiff()
The module computes the local vs. GMT time difference to include in the timestamps added
into the message headers. As the time difference may change due to summer savings time
changes you may want to reset the time difference ocassionaly in long running programs.
CONFIG
If you create a file named Sender.config in the same directory where Sender.pm resides,
this file will be "require"d as soon as you "use Mail::Sender" in your script. Of course
the Sender.config MUST "return a true value", that is it has to be succesfully compiled
and the last statement must return a true value. You may use this to forbide the use of
Mail::Sender to some users.
You may define the default settings for new Mail::Sender objects and do a few more things.
The default options are stored in hash %Mail::Sender::default. You may use all the options
you'd use in "new", "Open", "OpenMultipart", "MailMsg" or "MailFile".
Eg.
%default = (
smtp => 'mail.yourhost.cz',
from => getlogin.'yourhost.cz',
client => getlogin.'.yourhost.cz'
);
# of course you will use your own mail server here !
The other options you may set here (or later of course) are $Mail::Sender::SITE_HEADERS,
$Mail::Sender::NO_X_MAILER and $Mail::Sender::NO_DATE. (These are plain old scalar
variables, there is no function or method for modifying them. Just set them to anything
you need.)
The $Mail::Sender::SITE_HEADERS may contain headers that will be added to each mail
message sent by this script, the $Mail::Sender::NO_X_MAILER disables the header item
specifying that the message was sent by Mail::Sender and $Mail::Sender::NO_DATE turns off
the Date: header generation.
!!! $Mail::Sender::SITE_HEADERS may NEVER end with \r\n !!!
If you want to set the $Mail::Sender::SITE_HEADERS for every script sent from your server
without your users being able to change it you may use this hack:
$loginname = something_that_identifies_the_user();
*Mail::Sender::SITE_HEADERS = \"X-Sender: $loginname via $0";
$Mail::Sender::NO_X_MAILER = 1;
You may even "install" your custom function that will be evaluated for each message just
before contacting the server. You may change all the options from within as well as stop
sending the message.
All you have to do is to create a function named SiteHook in Mail::Sender package. This
function will get the Mail::Sender object as its first argument. If it returns a TRUE
value the message is sent, if it returns FALSE the sending is canceled and the user gets
"Site specific error" error message.
If you want to give some better error message you may do it like this :
sub SiteHook {
my $self = shift;
if (whatever($self)) {
$self->Error( SITEERROR);
$Mail::Sender::Error = "I don't like this mail";
return 0
} else {
return 1;
}
}
This example will ensure the from address is the users real address :
sub SiteHook {
my $self = shift;
$self->{'fromaddr'} = getlogin.'@yoursite.com';
$self->{'from'} = getlogin.'@yoursite.com';
1;
}
Please note that at this stage the from address is in two different object properties.
$self->{'from'} is the address as it will appear in the mail, that is it may include the
full name of the user or any other comment ( "Jan Krynicky <jenda AT krynicky.cz>" for
example), while the $self->{'fromaddr'} is realy just the email address per se and it will
be used in conversation with the SMTP server. It must be without comments
("jenda AT krynicky.cz" for example)!
Without write access to .../lib/Mail/Sender.pm or .../lib/Mail/Sender.config your users
will then be unable to get rid of this header. Well ... everything is doable, if they are
cheeky enough ... :-(
So if you take care of some site with virtual servers for several clients and implement
some policy via SiteHook() or $Mail::Sender::SITE_HEADERS search the clients' scripts for
"SiteHook" and "SITE_HEADERS" from time to time. To see who's cheating.
AUTHENTICATION
If you get a "Local user "xxx AT yyy.com" unknown on host "zzz"" message it usualy means that
your mail server is set up to forbid mail relay. That is it only accepts messages to or
from a local user. If you need to be able to send a message with both the sender's and
recipient's address remote, you need to somehow authenticate to the server. You may need
the help of the mail server's administrator to find out what username and password and/or
what authentication protocol are you supposed to use.
There are many authentication protocols defined for ESTMP, Mail::Sender natively supports
only PLAIN, LOGIN, CRAM-MD5 and NTLM (please see the docs for "new Mail::Sender").
If you want to know what protocols are supported by your server you may get the list by
this:
/tmp# perl -MMail::Sender -e 'Mail::Sender->printAuthProtocols("the.server.com")'
or
c:\> perl -MMail::Sender -e "Mail::Sender->printAuthProtocols('the.server.com')"
There is one more way to authenticate. Some servers want you to login by POP3 before you
can send a message. You have to use Net::POP3 or Mail::POP3Client to do this.
Other protocols
It is possible to add new authentication protocols to Mail::Sender. All you have to do is
to define a function Mail::Sender::Auth::PROTOCOL_NAME that will implement the login. The
function gets one parameter ... the Mail::Sender object. It can access these properties:
$obj->{'socket'} : the socket to print to and read from
you may use the send_cmd() function to send a request
and read a response from the server
$obj->{'authid'} : the username specified in the new Mail::Sender,
Open or OpenMultipart call
$obj->{'authpwd'} : the password
$obj->{auth...} : all unknown parameters passed to the constructor or the mail
opening/creation methods are preserved in the object. If the protocol requires
any other options, please use names starting with "auth". Eg. "authdomain", ...
$obj->{'error'} : this should be set to a negative error number. Please use numbers
below -1000 for custom errors.
$obj->{'error_msg'} : this should be set to the error message
If the login fails you should
1) Set $Mail::Sender::Error to the error message
2) Set $obj->{'error_msg'} to the error message
2) Set $obj->{'error'} to a negative number
3) return a negative number
If it succeeds, please return "nothing" :
return;
Please use the protocols defined within Sender.pm as examples.
EXAMPLES
Object creation
ref ($sender = new Mail::Sender { from => 'somebody AT somewhere.com',
smtp => 'mail.yourISP.com', boundary => 'This-is-a-mail-boundary-435427'})
or die "Error in mailing : $Mail::Sender::Error\n";
or
my $sender = new Mail::Sender { ... };
die "Error in mailing : $Mail::Sender::Error\n" unless ref $sender;
or
my $sender = new Mail::Sender { ..., on_errors => 'undef' }
or die "Error in mailing : $Mail::Sender::Error\n";
You may specify the options either when creating the Mail::Sender object or later when you
open a message. You may also set the default options when installing the module (See
"CONFIG" section). This way the admin may set the SMTP server and even the authentication
options and the users do not have to specify it again.
You should keep in mind that the way Mail::Sender reports failures depends on the
'on_errors'=> option. If you set it to 'die' it throws an exception, if you set it to
"undef" or 'undef' it returns undef and otherwise it returns a negative error code!
Simple single part message
$sender = new Mail::Sender {
smtp => 'mail.yourISP.com',
from => 'somebody AT somewhere.com',
on_errors => undef,
}
or die "Can't create the Mail::Sender object: $Mail::Sender::Error\n";
$sender->Open({
to => 'mama AT home.org, papa AT work.com',
cc => 'somebody AT somewhere.com',
subject => 'Sorry, I\'ll come later.'
})
or die "Can't open the message: $sender->{'error_msg'}\n";
$sender->SendLineEnc("I'm sorry, but thanks to the lusers,
I'll come at 10pm at best.");
$sender->SendLineEnc("\nHi, Jenda");
$sender->Close()
or die "Failed to send the message: $sender->{'error_msg'}\n";
or
eval {
$sender = new Mail::Sender {
smtp => 'mail.yourISP.com',
from => 'somebody AT somewhere.com',
on_errors => 'die',
};
$sender->Open({
to => 'mama AT home.org, papa AT work.com',
cc => 'somebody AT somewhere.com',
subject => 'Sorry, I\'ll come later.'
});
$sender->SendLineEnc("I'm sorry, but thanks to the lusers,
I'll come at 10pm at best.");
$sender->SendLineEnc("\nHi, Jenda");
$sender->Close();
};
if ($@) {
die "Failed to send the message: $@\n";
}
or
$sender = new Mail::Sender {
smtp => 'mail.yourISP.com',
from => 'somebody AT somewhere.com',
on_errors => 'code',
};
die "Can't create the Mail::Sender object: $Mail::Sender::Error\n"
unless ref $sender;
ref $sender->Open({
to => 'mama AT home.org, papa AT work.com',
cc => 'somebody AT somewhere.com',
subject => 'Sorry, I\'ll come later.'
})
or die "Can't open the message: $sender->{'error_msg'}\n";
$sender->SendLineEnc("I'm sorry, but thanks to the lusers,
I'll come at 10pm at best.");
$sender->SendLineEnc("\nHi, Jenda");
ref $sender->Close
or die "Failed to send the message: $sender->{'error_msg'}\n";
Using GetHandle()
ref $sender->Open({to => 'friend AT other.com', subject => 'Hello dear friend'})
or die "Error: $Mail::Sender::Error\n";
my $FH = $sender->GetHandle();
print $FH "How are you?\n\n";
print $FH <<'*END*';
I've found these jokes.
Doctor, I feel like a pack of cards.
Sit down and I'll deal with you later.
Doctor, I keep thinking I'm a dustbin.
Don't talk rubbish.
Hope you like'em. Jenda
*END*
$sender->Close;
# or
# close $FH;
or
eval {
$sender->Open({ on_errors => 'die',
to => 'mama AT home.org, papa AT work.com',
cc => 'somebody AT somewhere.com',
subject => 'Sorry, I\'ll come later.'});
$sender->SendLineEnc("I'm sorry, but due to a big load of work,
I'll come at 10pm at best.");
$sender->SendLineEnc("\nHi, Jenda");
$sender->Close;
};
if ($@) {
print "Error sending the email: $@\n";
} else {
print "The mail was sent.\n";
}
Multipart message with attachment
$sender->OpenMultipart({to => 'Perl-Win32-Users AT activeware.foo',
subject => 'Mail::Sender.pm - new module'});
$sender->Body;
$sender->SendEnc(<<'*END*');
Here is a new module Mail::Sender.
It provides an object based interface to sending SMTP mails.
It uses a direct socket connection, so it doesn't need any
additional program.
Enjoy, Jenda
*END*
$sender->Attach(
{description => 'Perl module Mail::Sender.pm',
ctype => 'application/x-zip-encoded',
encoding => 'Base64',
disposition => 'attachment; filename="Sender.zip"; type="ZIP archive"',
file => 'sender.zip'
});
$sender->Close;
or
$sender->OpenMultipart({to => 'Perl-Win32-Users AT activeware.foo',
subject => 'Mail::Sender.pm - new version'});
$sender->Body({ msg => <<'*END*' });
Here is a new module Mail::Sender.
It provides an object based interface to sending SMTP mails.
It uses a direct socket connection, so it doesn't need any
additional program.
Enjoy, Jenda
*END*
$sender->Attach(
{description => 'Perl module Mail::Sender.pm',
ctype => 'application/x-zip-encoded',
encoding => 'Base64',
disposition => 'attachment; filename="Sender.zip"; type="ZIP archive"',
file => 'sender.zip'
});
$sender->Close;
or (in case you have the file contents in a scalar)
$sender->OpenMultipart({to => 'Perl-Win32-Users AT activeware.foo',
subject => 'Mail::Sender.pm - new version'});
$sender->Body({ msg => <<'*END*' });
Here is a new module Mail::Sender.
It provides an object based interface to sending SMTP mails.
It uses a direct socket connection, so it doesn't need any
additional program.
Enjoy, Jenda
*END*
$sender->Part(
{description => 'Perl module Mail::Sender.pm',
ctype => 'application/x-zip-encoded',
encoding => 'Base64',
disposition => 'attachment; filename="Sender.zip"; type="ZIP archive"',
msg => $sender_zip_contents,
});
$sender->Close;
Using exceptions (no need to test return values after each function)
use Mail::Sender;
eval {
(new Mail::Sender {on_errors => 'die'})
->OpenMultipart({smtp=> 'jenda.krynicky.cz', to => 'jenda AT krynicky.cz',subject => 'Mail::Sender.pm - new version'})
->Body({ msg => <<'*END*' })
Here is a new module Mail::Sender.
It provides an object based interface to sending SMTP mails.
It uses a direct socket connection, so it doesn't need any
additional program.
Enjoy, Jenda
*END*
->Attach({
description => 'Perl module Mail::Sender.pm',
ctype => 'application/x-zip-encoded',
encoding => 'Base64',
disposition => 'attachment; filename="Sender.zip"; type="ZIP archive"',
file => 'W:\jenda\packages\Mail\Sender\Mail-Sender-0.7.14.3.tar.gz'
})
->Close();
} or print "Error sending mail: $@\n";
Using MailMsg() shortcut to send simple messages
If everything you need is to send a simple message you may use:
if (ref ($sender->MailMsg({to =>'Jenda AT Krynicky.czX', subject => 'this is a test',
msg => "Hi Johnie.\nHow are you?"}))) {
print "Mail sent OK."
} else {
die "$Mail::Sender::Error\n";
}
or
if ($sender->MailMsg({
smtp => 'mail.yourISP.com',
from => 'somebody AT somewhere.com',
to =>'Jenda AT Krynicky.czX',
subject => 'this is a test',
msg => "Hi Johnie.\nHow are you?"
}) < 0) {
die "$Mail::Sender::Error\n";
}
print "Mail sent OK."
Using MailMsg and authentication
if ($sender->MailMsg({
smtp => 'mail.yourISP.com',
from => 'somebody AT somewhere.com',
to =>'Jenda AT Krynicky.czX',
subject => 'this is a test',
msg => "Hi Johnie.\nHow are you?"
auth => 'NTLM',
authid => 'jenda',
authpwd => 'benda',
}) < 0) {
die "$Mail::Sender::Error\n";
}
print "Mail sent OK."
Using MailFile() shortcut to send an attachment
If you want to attach some files:
(ref ($sender->MailFile(
{to =>'you AT address.com', subject => 'this is a test',
msg => "Hi Johnie.\nI'm sending you the pictures you wanted.",
file => 'image1.jpg,image2.jpg'
}))
and print "Mail sent OK."
)
or die "$Mail::Sender::Error\n";
Sending HTML messages
If you are sure the HTML doesn't contain any accentuated characters (with codes above
127).
open IN, $htmlfile or die "Cannot open $htmlfile : $!\n";
$sender->Open({ from => 'your AT address.com', to => 'other AT address.com',
subject => 'HTML test',
ctype => "text/html",
encoding => "7bit"
}) or die $Mail::Sender::Error,"\n";
while (<IN>) { $sender->SendEx($_) };
close IN;
$sender->Close();
Otherwise use SendEnc() instead of SendEx() and "quoted-printable" instead of "7bit".
Another ... quicker way ... would be:
open IN, $htmlfile or die "Cannot open $htmlfile : $!\n";
$sender->Open({ from => 'your AT address.com', to => 'other AT address.com',
subject => 'HTML test',
ctype => "text/html",
encoding => "quoted-printable"
}) or die $Mail::Sender::Error,"\n";
while (read IN, $buff, 4096) { $sender->SendEnc($buff) };
close IN;
$sender->Close();
Sending HTML messages with inline images
if (ref $sender->OpenMultipart({
from => 'someone AT somewhere.net', to => $recipients,
subject => 'Embedded Image Test',
boundary => 'boundary-test-1',
multipart => 'related'})) {
$sender->Attach(
{description => 'html body',
ctype => 'text/html; charset=us-ascii',
encoding => '7bit',
disposition => 'NONE',
file => 'test.html'
});
$sender->Attach({
description => 'ed\'s gif',
ctype => 'image/gif',
encoding => 'base64',
disposition => "inline; filename=\"apache_pb.gif\";\r\nContent-ID: <img1>",
file => 'apache_pb.gif'
});
$sender->Close() or die "Close failed! $Mail::Sender::Error\n";
} else {
die "Cannot send mail: $Mail::Sender::Error\n";
}
And in the HTML you'll have this :
... <IMG src="cid:img1"> ... on the place where you want the inlined image.
Please keep in mind that the image name is unimportant, it's the Content-ID what counts!
# or using the eval{ $obj->Method()->Method()->...->Close()} trick ...
use Mail::Sender;
eval {
(new Mail::Sender)
->OpenMultipart({
to => 'someone AT somewhere.com',
subject => 'Embedded Image Test',
boundary => 'boundary-test-1',
type => 'multipart/related'
})
->Attach({
description => 'html body',
ctype => 'text/html; charset=us-ascii',
encoding => '7bit',
disposition => 'NONE',
file => 'c:\temp\zk\HTMLTest.htm'
})
->Attach({
description => 'Test gif',
ctype => 'image/gif',
encoding => 'base64',
disposition => "inline; filename=\"test.gif\";\r\nContent-ID: <img1>",
file => 'test.gif'
})
->Close()
}
or die "Cannot send mail: $Mail::Sender::Error\n";
Sending message with plaintext and HTML alternatives
use Mail::Sender;
eval {
(new Mail::Sender)
->OpenMultipart({
to => 'someone AT somewhere.com',
subject => 'Alternatives',
# debug => 'c:\temp\zkMailFlow.log',
multipart => 'mixed',
})
->Part({ctype => 'multipart/alternative'})
->Part({ ctype => 'text/plain', disposition => 'NONE', msg => <<'*END*' })
A long
mail
message.
*END*
->Part({ctype => 'text/html', disposition => 'NONE', msg => <<'*END*'})
<html><body><h1>A long</h1><p align=center>
mail
message.
</p></body></html>
*END*
->EndPart("multipart/alternative")
->Close();
} or print "Error sending mail: $Mail::Sender::Error\n";
Sending message with plaintext and HTML alternatives with inline images
use Mail::Sender;
eval {
(new Mail::Sender)
->OpenMultipart({
to => 'someone AT somewhere.com',
subject => 'Alternatives with images',
# debug => 'c:\temp\zkMailFlow.log',
multipart => 'related',
})
->Part({ctype => 'multipart/alternative'})
->Part({ ctype => 'text/plain', disposition => 'NONE', msg => <<'*END*' })
A long
mail
message.
*END*
->Part({ctype => 'text/html', disposition => 'NONE', msg => <<'*END*'})
<html><body><h1>A long</h1><p align=center>
mail
message.
<img src="cid:img1">
</p></body></html>
*END*
->EndPart("multipart/alternative")
->Attach({
description => 'ed\'s jpg',
ctype => 'image/jpeg',
encoding => 'base64',
disposition => "inline; filename=\"0518m_b.jpg\";\r\nContent-ID: <img1>",
file => 'E:\pix\humor\0518m_b.jpg'
})
->Close();
} or print "Error sending mail: $Mail::Sender::Error\n";
Keep in mind please that different mail clients display messages differently. You may need
to try several ways to create messages so that they appear the way you need. These two
examples looked like I expected in Pegasus Email and MS Outlook.
If this doesn't work with your mail client, please let me know and we might find a way.
Sending a file that was just uploaded from an HTML form
use CGI;
use Mail::Sender;
$query = new CGI;
# uploading the file...
$filename = $query->param('mailformFile');
if ($filename ne ""){
$tmp_file = $query->tmpFileName($filename);
}
$sender = new Mail::Sender {from => 'script AT krynicky.cz',smtp => 'mail.krynicky.czX'};
$sender->OpenMultipart({to=> 'jenda AT krynicky.czX',subject=> 'test CGI attach'});
$sender->Body();
$sender->Send(<<"*END*");
This is just a test of mail with an uploaded file.
Jenda
*END*
$sender->Attach({
encoding => 'Base64',
description => $filename,
ctype => $query->uploadInfo($filename)->{'Content-Type'},
disposition => "attachment; filename = $filename",
file => $tmp_file
});
$sender->Close();
print "Content-type: text/plain\n\nYes, it's sent\n\n";
Listing the authentication protocols supported by the server
use Mail::Sender;
my $sender = new Mail::Sender {smtp => 'localhost'};
die "Error: $Mail::Sender::Error\n" unless ref $sender;
print join(', ', $sender->QueryAuthProtocols()),"\n";
or (if you have Mail::Sender 0.8.05 or newer)
use Mail::Sender;
print join(', ', Mail::Sender->QueryAuthProtocols('localhost')),"\n";
or
use Mail::Sender;
print join(', ', Mail::Sender::QueryAuthProtocols('localhost')),"\n";
FAQ
Forwarding the messages created by Mail::Sender removes accents. Why?
The most likely colprit is missing or incorrect charset specified for the body or a part
of the email. You should add something like
charset => 'iso-8859-1',
encoding => 'quoted-printable',
to the parameters passed to Open(), OpenMultipart(), MailMsg(), Body() or Part() or
b_charset => 'iso-8859-1',
b_encoding => 'quoted-printable',
to the parameters for MailFile().
If you use a different charset ('iso-8859-2', 'win-1250', ...) you will of course need to
specify that charset. If you are not sure, try to send a mail with some other mail client
and then look at the message/part headers.
Sometimes there is an equals sign at the end of an attached file when I open the email in
Outlook. What's wrong?
Outlook is. It has (had) a bug in its quoted printable decoding routines. This problem
happens only in quoted-printable encoded parts on multipart messages. And only if the
data in that part do not end with a newline. (This is new in 0.8.08, in older versions it
happened in all QP encoded parts.)
The problem is that an equals sign at the end of a line in a quoted printable encoded text
means "ignore the newline". That is
fooo sdfg sdfg sdfh dfh =
dfsgdsfg
should be decoded as
fooo sdfg sdfg sdfh dfh dfsgdsfg
The problem is at the very end of a file. The part boundary (text separating different
parts of a multipart message) has to start on a new line, if the attached file ends by a
newline everything is cool. If it doesn't I need to add a newline and to denote that the
newline is not part of the original file I add an equals:
dfgd dsfgh dfh dfh dfhdfhdfhdfgh
this is the last line.=
--message-boundary-146464--
Otherwise I'd add a newline at the end of the file. If you do not care about the newline
and want to be sure Outlook doesn't add the equals to the file add
bypass_outlook_bug => 1
parameter to "new Mail::Sender" or "Open"/"OpenMultipart".
WARNING
DO NOT mix Open(Multipart)|Send(Line)(Ex)|Close with MailMsg or MailFile. Both
Mail(Msg/File) close any Open-ed mail. Do not try this:
$sender = new Mail::Sender ...;
$sender->OpenMultipart...;
$sender->Body;
$sender->Send("...");
$sender->MailFile({file => 'something.ext');
$sender->Close;
This WON'T work!!!
GOTCHAS
Local user "someone AT somewhere.com" doesn't exist
"Thanks" to spammers mail servers usualy do not allow just anyone to post a message
through them. Most often they require that either the sender or the recipient is local to
the server
Mail::Sendmail works, Mail::Sender doesn't
If you are able to connect to the mail server and scripts using Mail::Sendmail work, but
Mail::Sender fails with "connect() failed", please review the settings in /etc/services.
The port for SMTP should be 25.
$/ and $\
If you change the $/ ($RS, $INPUT_RECORD_SEPARATOR) or $\ ($ORS, $OUTPUT_RECORD_SEPARATOR)
or $, ($OFS, $OUTPUT_FIELD_SEPARATOR) Mail::Sender may stop working! Keep in mind that
those variables are global and therefore they change the behaviour of <> and print
everywhere. And since the SMTP is a plain text protocol if you change the notion of lines
you can break it.
If you have to fiddle with $/, $\ or $, do it in the smallest possible block of code and
local()ize the change!
open my $IN, '<', $filename or die "Can't open $filename: $!\n";
my $data = do {local $/; <$IN>};
close $IN;
BUGS
I'm sure there are many. Please let me know if you find any.
The problem with multiline responses from some SMTP servers (namely qmail) is solved. At
last.
SEE ALSO
MIME::Lite, MIME::Entity, Mail::Sendmail, Mail::Mailer, ...
There are lots of mail related modules on CPAN, with different capabilities and
interfaces. You have to find the right one yourself :-)
DISCLAIMER
This module is based on SendMail.pm Version : 1.21 that appeared in
Perl-Win32-Users AT activeware.com mailing list. I don't remember the name of the poster and
it's not mentioned in the script. Thank you mr. "undef".
AUTHOR
Jan Krynicky <Jenda AT Krynicky.cz> http://Jenda.Krynicky.cz
With help of Rodrigo Siqueira <rodrigo AT insite.br>, Ed McGuigan <itstech1 AT gate.net>,
John Sanche <john AT quadrant.net>, Brian Blakley <bblakley AT mp5.net>, and others.
COPYRIGHT
Copyright (c) 1997-2006 Jan Krynicky <Jenda AT Krynicky.cz>. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself. There is only one aditional condition, you may NOT use this module
for SPAMing! NEVER! (see http://spam.abuse.net/ for definition)
perl v5.10.1 2008-07-14 Sender(3pm)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache
Under GNU General Public License
2024-04-20 02:39 @18.222.119.148 CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)