{
    "mode": "man",
    "parameter": "LVSCAN",
    "section": "8",
    "url": "https://www.chedong.com/phpMan.php/man/LVSCAN/8/json",
    "generated": "2026-06-15T13:39:35Z",
    "synopsis": "",
    "sections": {
        "NAME": {
            "content": "lvscan - List all logical volumes in all volume groups\n",
            "subsections": []
        },
        "SYNOPSIS": {
            "content": "",
            "subsections": [
                {
                    "name": "lvscan",
                    "content": "[ optionargs ]\n"
                }
            ]
        },
        "DESCRIPTION": {
            "content": "lvscan  scans  all  VGs  or all supported LVM block devices in the system for LVs. The output\nconsists of one line for each LV indicating whether or not it is active, a snapshot  or  ori‐\ngin,  the  size of the device and its allocation policy. Use lvs(8) or lvdisplay(8) to obtain\nmore comprehensive information about LVs.\n",
            "subsections": []
        },
        "USAGE": {
            "content": "",
            "subsections": [
                {
                    "name": "lvscan",
                    "content": "[ -a|--all ]\n[ -b|--blockdevice ]\n[    --ignorelockingfailure ]\n[    --readonly ]\n[    --reportformat basic|json ]\n[ COMMONOPTIONS ]\n\nCommon options for lvm:\n[ -d|--debug ]\n[ -h|--help ]\n[ -q|--quiet ]\n[ -t|--test ]\n[ -v|--verbose ]\n[ -y|--yes ]\n[    --commandprofile String ]\n[    --config String ]\n[    --driverloaded y|n ]\n[    --lockopt String ]\n[    --longhelp ]\n[    --nolocking ]\n[    --profile String ]\n[    --version ]\n"
                }
            ]
        },
        "OPTIONS": {
            "content": "",
            "subsections": [
                {
                    "name": "-a --all",
                    "content": "Show information about internal LVs.  These are components of normal LVs, such as mir‐\nrors, which are not independently accessible, e.g. not mountable.\n",
                    "flag": "-a",
                    "long": "--all"
                },
                {
                    "name": "-b --blockdevice",
                    "content": "No longer used.\n\n--commandprofile String\nThe command profile to use for command configuration.  See lvm.conf(5) for more infor‐\nmation about profiles.\n\n--config String\nConfig settings for the command. These override lvm.conf settings.  The String arg\nuses the same format as lvm.conf, or may use section/field syntax.  See lvm.conf(5)\nfor more information about config.\n",
                    "flag": "-b",
                    "long": "--blockdevice"
                },
                {
                    "name": "-d --debug",
                    "content": "Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to\nthe log file and/or syslog (if configured).\n\n--driverloaded y|n\nIf set to no, the command will not attempt to use device-mapper.  For testing and de‐\nbugging.\n",
                    "flag": "-d",
                    "long": "--debug"
                },
                {
                    "name": "-h --help",
                    "content": "Display help text.\n",
                    "flag": "-h",
                    "long": "--help"
                },
                {
                    "name": "--ignorelockingfailure",
                    "content": "Allows a command to continue with read-only metadata operations after locking fail‐\nures.\n\n--lockopt String\nUsed to pass options for special cases to lvmlockd.  See lvmlockd(8) for more informa‐\ntion.\n",
                    "long": "--ignorelockingfailure"
                },
                {
                    "name": "--longhelp",
                    "content": "Display long help text.\n",
                    "long": "--longhelp"
                },
                {
                    "name": "--nolocking",
                    "content": "Disable locking.\n\n--profile String\nAn alias for --commandprofile or --metadataprofile, depending on the command.\n",
                    "long": "--nolocking"
                },
                {
                    "name": "-q --quiet",
                    "content": "Suppress output and log messages. Overrides --debug and --verbose.  Repeat once to\nalso suppress any prompts with answer 'no'.\n",
                    "flag": "-q",
                    "long": "--quiet"
                },
                {
                    "name": "--readonly",
                    "content": "Run the command in a special read-only mode which will read on-disk metadata without\nneeding to take any locks. This can be used to peek inside metadata used by a virtual\nmachine image while the virtual machine is running. No attempt will be made to commu‐\nnicate with the device-mapper kernel driver, so this option is unable to report\nwhether or not LVs are actually in use.\n\n--reportformat basic|json\nOverrides current output format for reports which is defined globally by the re‐\nport/outputformat setting in lvm.conf.  basic is the original format with columns and\nrows.  If there is more than one report per command, each report is prefixed with the\nreport name for identification. json produces report output in JSON format. See lvmre‐‐\nport(7) for more information.\n",
                    "long": "--readonly"
                },
                {
                    "name": "-t --test",
                    "content": "Run in test mode. Commands will not update metadata.  This is implemented by disabling\nall metadata writing but nevertheless returning success to the calling function. This\nmay lead to unusual error messages in multi-stage operations if a tool relies on read‐\ning back metadata it believes has changed but hasn't.\n",
                    "flag": "-t",
                    "long": "--test"
                },
                {
                    "name": "-v --verbose",
                    "content": "Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to\nstdout and stderr.\n",
                    "flag": "-v",
                    "long": "--verbose"
                },
                {
                    "name": "--version",
                    "content": "Display version information.\n",
                    "long": "--version"
                },
                {
                    "name": "-y --yes",
                    "content": "Do not prompt for confirmation interactively but always assume the answer yes. Use\nwith extreme caution.  (For automatic no, see -qq.)\n",
                    "flag": "-y",
                    "long": "--yes"
                }
            ]
        },
        "VARIABLES": {
            "content": "String\nSee the option description for information about the string content.\n\nSize[UNIT]\nSize is an input number that accepts an optional unit.  Input units are always treated\nas base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024.\nThe default input unit is specified by letter, followed  by  |UNIT.   UNIT  represents\nother  possible  input  units:  bBsSkKmMgGtTpPeE.  b|B is bytes, s|S is sectors of 512\nbytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB.   (This\nshould  not  be  confused  with the output control --units, where capital letters mean\nmultiple of 1000.)\n",
            "subsections": []
        },
        "ENVIRONMENT VARIABLES": {
            "content": "See lvm(8) for information about environment variables used by lvm.  For example, LVMVGNAME\ncan generally be substituted for a required VG parameter.\n",
            "subsections": []
        },
        "SEE ALSO": {
            "content": "lvm(8) lvm.conf(5) lvmconfig(8)\n\npvchange(8)  pvck(8)  pvcreate(8)  pvdisplay(8) pvmove(8) pvremove(8) pvresize(8) pvs(8) pvs‐‐\ncan(8)\n\nvgcfgbackup(8) vgcfgrestore(8) vgchange(8) vgck(8) vgcreate(8) vgconvert(8) vgdisplay(8)  vg‐‐\nexport(8)  vgextend(8) vgimport(8) vgimportclone(8) vgmerge(8) vgmknodes(8) vgreduce(8) vgre‐‐\nmove(8) vgrename(8) vgs(8) vgscan(8) vgsplit(8)\n\nlvcreate(8) lvchange(8) lvconvert(8) lvdisplay(8) lvextend(8) lvreduce(8)  lvremove(8)  lvre‐‐\nname(8) lvresize(8) lvs(8) lvscan(8)\n\nlvm-fullreport(8) lvm-lvpoll(8) lvm2-activation-generator(8) blkdeactivate(8) lvmdump(8)\n\ndmeventd(8) lvmpolld(8) lvmlockd(8) lvmlockctl(8) cmirrord(8) lvmdbusd(8)\n\nlvmsystemid(7) lvmreport(7) lvmraid(7) lvmthin(7) lvmcache(7)\n\n\n\nRed Hat, Inc.                     LVM TOOLS 2.03.11(2) (2021-01-08)                        LVSCAN(8)",
            "subsections": []
        }
    },
    "summary": "lvscan - List all logical volumes in all volume groups",
    "flags": [
        {
            "flag": "-a",
            "long": "--all",
            "arg": null,
            "description": "Show information about internal LVs. These are components of normal LVs, such as mir‐ rors, which are not independently accessible, e.g. not mountable."
        },
        {
            "flag": "-b",
            "long": "--blockdevice",
            "arg": null,
            "description": "No longer used. --commandprofile String The command profile to use for command configuration. See lvm.conf(5) for more infor‐ mation about profiles. --config String Config settings for the command. These override lvm.conf settings. The String arg uses the same format as lvm.conf, or may use section/field syntax. See lvm.conf(5) for more information about config."
        },
        {
            "flag": "-d",
            "long": "--debug",
            "arg": null,
            "description": "Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). --driverloaded y|n If set to no, the command will not attempt to use device-mapper. For testing and de‐ bugging."
        },
        {
            "flag": "-h",
            "long": "--help",
            "arg": null,
            "description": "Display help text."
        },
        {
            "flag": "",
            "long": "--ignorelockingfailure",
            "arg": null,
            "description": "Allows a command to continue with read-only metadata operations after locking fail‐ ures. --lockopt String Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more informa‐ tion."
        },
        {
            "flag": "",
            "long": "--longhelp",
            "arg": null,
            "description": "Display long help text."
        },
        {
            "flag": "",
            "long": "--nolocking",
            "arg": null,
            "description": "Disable locking. --profile String An alias for --commandprofile or --metadataprofile, depending on the command."
        },
        {
            "flag": "-q",
            "long": "--quiet",
            "arg": null,
            "description": "Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer 'no'."
        },
        {
            "flag": "",
            "long": "--readonly",
            "arg": null,
            "description": "Run the command in a special read-only mode which will read on-disk metadata without needing to take any locks. This can be used to peek inside metadata used by a virtual machine image while the virtual machine is running. No attempt will be made to commu‐ nicate with the device-mapper kernel driver, so this option is unable to report whether or not LVs are actually in use. --reportformat basic|json Overrides current output format for reports which is defined globally by the re‐ port/outputformat setting in lvm.conf. basic is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. json produces report output in JSON format. See lvmre‐‐ port(7) for more information."
        },
        {
            "flag": "-t",
            "long": "--test",
            "arg": null,
            "description": "Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on read‐ ing back metadata it believes has changed but hasn't."
        },
        {
            "flag": "-v",
            "long": "--verbose",
            "arg": null,
            "description": "Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr."
        },
        {
            "flag": "",
            "long": "--version",
            "arg": null,
            "description": "Display version information."
        },
        {
            "flag": "-y",
            "long": "--yes",
            "arg": null,
            "description": "Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see -qq.)"
        }
    ],
    "examples": [],
    "see_also": [
        {
            "name": "lvm",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm/8/json"
        },
        {
            "name": "lvm.conf",
            "section": "5",
            "url": "https://www.chedong.com/phpMan.php/man/lvm.conf/5/json"
        },
        {
            "name": "lvmconfig",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmconfig/8/json"
        },
        {
            "name": "pvchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvchange/8/json"
        },
        {
            "name": "pvck",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvck/8/json"
        },
        {
            "name": "pvcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvcreate/8/json"
        },
        {
            "name": "pvdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvdisplay/8/json"
        },
        {
            "name": "pvmove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvmove/8/json"
        },
        {
            "name": "pvremove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvremove/8/json"
        },
        {
            "name": "pvresize",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvresize/8/json"
        },
        {
            "name": "pvs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/pvs/8/json"
        },
        {
            "name": "can",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/can/8/json"
        },
        {
            "name": "vgcfgbackup",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcfgbackup/8/json"
        },
        {
            "name": "vgcfgrestore",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcfgrestore/8/json"
        },
        {
            "name": "vgchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgchange/8/json"
        },
        {
            "name": "vgck",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgck/8/json"
        },
        {
            "name": "vgcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgcreate/8/json"
        },
        {
            "name": "vgconvert",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgconvert/8/json"
        },
        {
            "name": "vgdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgdisplay/8/json"
        },
        {
            "name": "export",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/export/8/json"
        },
        {
            "name": "vgextend",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgextend/8/json"
        },
        {
            "name": "vgimport",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgimport/8/json"
        },
        {
            "name": "vgimportclone",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgimportclone/8/json"
        },
        {
            "name": "vgmerge",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgmerge/8/json"
        },
        {
            "name": "vgmknodes",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgmknodes/8/json"
        },
        {
            "name": "vgreduce",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgreduce/8/json"
        },
        {
            "name": "move",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/move/8/json"
        },
        {
            "name": "vgrename",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgrename/8/json"
        },
        {
            "name": "vgs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgs/8/json"
        },
        {
            "name": "vgscan",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgscan/8/json"
        },
        {
            "name": "vgsplit",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/vgsplit/8/json"
        },
        {
            "name": "lvcreate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvcreate/8/json"
        },
        {
            "name": "lvchange",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvchange/8/json"
        },
        {
            "name": "lvconvert",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvconvert/8/json"
        },
        {
            "name": "lvdisplay",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvdisplay/8/json"
        },
        {
            "name": "lvextend",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvextend/8/json"
        },
        {
            "name": "lvreduce",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvreduce/8/json"
        },
        {
            "name": "lvremove",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvremove/8/json"
        },
        {
            "name": "name",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/name/8/json"
        },
        {
            "name": "lvresize",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvresize/8/json"
        },
        {
            "name": "lvs",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvs/8/json"
        },
        {
            "name": "lvscan",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvscan/8/json"
        },
        {
            "name": "lvm-fullreport",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm-fullreport/8/json"
        },
        {
            "name": "lvm-lvpoll",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm-lvpoll/8/json"
        },
        {
            "name": "lvm2-activation-generator",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvm2-activation-generator/8/json"
        },
        {
            "name": "blkdeactivate",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/blkdeactivate/8/json"
        },
        {
            "name": "lvmdump",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmdump/8/json"
        },
        {
            "name": "dmeventd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/dmeventd/8/json"
        },
        {
            "name": "lvmpolld",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmpolld/8/json"
        },
        {
            "name": "lvmlockd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmlockd/8/json"
        },
        {
            "name": "lvmlockctl",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmlockctl/8/json"
        },
        {
            "name": "cmirrord",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/cmirrord/8/json"
        },
        {
            "name": "lvmdbusd",
            "section": "8",
            "url": "https://www.chedong.com/phpMan.php/man/lvmdbusd/8/json"
        },
        {
            "name": "lvmsystemid",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmsystemid/7/json"
        },
        {
            "name": "lvmreport",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmreport/7/json"
        },
        {
            "name": "lvmraid",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmraid/7/json"
        },
        {
            "name": "lvmthin",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmthin/7/json"
        },
        {
            "name": "lvmcache",
            "section": "7",
            "url": "https://www.chedong.com/phpMan.php/man/lvmcache/7/json"
        }
    ]
}