2026-06-08 09:22 @216.73.217.65
CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
MHBUILD(1mh) MHBUILD(1mh) NAME mhbuild - translate MIME composition drafts for nmh messages SYNOPSIS mhbuild [-help] [-version] file [-auto | -noauto] [-list | -nolist] [-realsize | -norealsize] [-headers | -noheaders] [-directives | -nodirectives] [-rfc934mode | -norfc934mode] [-contentid | -nocon- tentid] [-verbose | -noverbose] [-disposition | -nodisposition] [-check | -nocheck] [-headerencoding encoding-algorithm | -auto- headerencoding] [-maxunencoded line-length] [-dist] DESCRIPTION The mhbuild command will translate a MIME composition draft into a valid MIME message. mhbuild creates multi-media messages as specified in RFCs 2045 through 2049. This includes the encoding of message headers as specified by RFC 2047, and, additionally, the encoding of MIME parameters as speci- fied in RFC 2231. If you specify the name of the composition file as "-", then mhbuild will accept the composition draft on the standard input. If the trans- lation of this input is successful, mhbuild will output the new MIME message to the standard output. This argument must be the last argu- ment on the command line. Otherwise, if the file argument to mhbuild is the name of a valid com- position file, and the translation is successful, mhbuild will replace the original file with the new MIME message. It will rename the origi- nal file to start with the "," character and end with the string ".orig", e.g., if you are editing the file "draft", it will be renamed to ",draft.orig". This allows you to easily recover the mhbuild input file. Listing the Contents The -list switch tells mhbuild to list the table of contents associated with the MIME message that is created. The -headers switch indicates that a one-line banner should be dis- played above the listing. The -realsize switch tells mhbuild to evalu- ate the "native" (decoded) format of each content prior to listing. This provides an accurate count at the expense of a small delay. If the -verbose switch is present, then the listing will show any "extra" information that is present in the message, such as comments in the "Content-Type" header. If the -disposition switch is present, then the listing will show any relevant information from the "Content-Disposition" header. Simplified Attachment Interface For users who wish to simply attach files to text content, mhbuild will scan the composition file for "Attach" headers. An "Attach" header contains a filename that will be appended to the message using normal MIME encapsulation rules. One filename is allowed per "Attach" header, but multiple "Attach" headers are allowed per composition file. These files will be appended after any other MIME content, including any content specified by mhbuild directives (see below). See send(1) for more details. By default, the Content-Disposition will be "attachment". mhbuild looks for user profile and mhn.defaults entries of the form mhbuild-disposition-type/subtype or mhbuild-disposition-type to supply the disposition value. The only supported values are "at- tachment" and "inline". Convert Interface The convert interface is a powerful mechanism that supports replying to MIME messages. These placeholders are used in the following descrip- tion: TYPE content type/subtype CONVERTER external program, and any fixed arguments, to con- vert content, such as from a request to a reply ARGSTRING arguments to pass from repl to CONVERTER FILE full path of message being replied to The convert support is based on pseudoheaders of the form Nmh-mhbuild-file-TYPE: FILE Nmh-mhbuild-args-TYPE: ARGSTRING in the draft. For each such pseudoheader, mhbuild looks in the profile and mhn.defaults for the corresponding TYPE entry to find the converter that supports it: mhbuild-convert-TYPE: CONVERTER It's a fatal error if no such entry is found for TYPE. An empty entry, e.g., mhbuild-convert-text/html: excludes parts of that TYPE from the draft. The mhn.defaults file contains default mhbuild-convert-text/html and mhbuild-convert-text/plain entries. Profile entries can be used to override corresponding mhn.defaults entries, as usual. Text converters should limit text line lengths to a maximum of 78 characters, and must limit them to a maximum of 998 characters, per RFC 5322 Sec. 2.1.1. For each TYPE part in FILE, mhbuild runs CONVERTER ARGSTRING on the content of the part. Each part in FILE that has no corresponding TYPE entry in the profile or mhn.defaults is excluded from the draft; the user can include them using mhbuild directives. repl inserts Nmh-mhbuild-text/html: and Nmh-mhbuild-text/plain: pseudo- headers in every draft. The user can prevent insertion of content parts of either of those types by putting corresponding empty entries in their profile. Only the highest precedence alternative with a supported TYPE of a mul- tipart/alternative part is used. mhn.defaults.sh selects the text/html-to-text/plain converter at in- stall time. It includes iconv and par, or fmt, in the pipeline only if they are found. Some content types require the addition of parameters to the Content- Type header, such as "method=REPLY" for text/calendar. mhbuild looks for a Content-Type header, followed by a blank line, at the beginning of the converter output. If one is found, it is used for the corre- sponding part in the reply draft. The convert interface doesn't support different ARGSTRINGs or different converters for different parts of the same TYPE. That would require associating parts by part number with the ARGSTRINGs or converters. Instead, that can be done (currently, without using the convert sup- port), with mhbuild directives as described below, e.g., #text/html; charset=utf-8 *8bit | mhstore -noverbose -part 42.7 -outfile - | w3m -dump -cols 64 -T text/html -O utf-8 The only way to mix convert pseudoheaders and mhbuild directives is to insert the directives before mhbuild is run, which is typically done by entering mime at the "What now?" prompt, or with an -editor mhbuild switch. These (optional) setup steps can make the convert support easier to use: 1) If the par program is installed on your system, it will be set by default (in mhn.defaults) to filter the converter output. It helps to set the PARINIT environment variable, as described in par(1). 2) Add this line to your profile: mhbuild-next: $EDITOR assuming that your EDITOR environment variable is set; if not, re- place EDITOR with the name of your editor. Without that profile entry, a response of "e[dit]" at the What now? prompt will require specification of your editor if an -editor mhbuild switch is used. 3) If using repl, source the Bourne-shell compatible functions in /usr/share/doc/nmh/contrib/replaliases. That script also sets the PARINIT environment variable if it was not set. Translating the Composition File mhbuild is essentially a filter to aid in the composition of MIME mes- sages. mhbuild will convert an mhbuild "composition file" into a valid MIME message. An mhbuild "composition file" is just a file containing plain text that is interspersed with various mhbuild directives. When this file is processed by mhbuild, the various directives will be ex- panded to the appropriate content, and will be encoded according to the MIME standards. The resulting MIME message can then be sent by elec- tronic mail. The formal syntax for a mhbuild composition file is defined at the end of this document, but the ideas behind this format are not complex. Basically, the body contains one or more contents. A content consists of either a directive, indicated with a "#" as the first character of a line; or, plaintext (one or more lines of text). The continuation character, "\", may be used to enter a single directive on more than one line, e.g., #image/png \ /home/foobar/junk/picture.png There are five kinds of directives: "type" directives, which name the type and subtype of the content; "external-type" directives, which also name the type and subtype of the content; the "message" directive (#forw), which is used to forward one or more messages; the "begin" di- rective (#begin), which is used to create a multipart content; and the "on/off/pop" directives (#on, #off, #pop) which control whether any other directives are honored at all. The -directives switch allows control over whether mhbuild will honor any of the "#"-directives. This can also be affected with the #on or #off directives, and #pop, which restores the state of processing to that preceding the most recent #on or #off. (The #on, #off, and #pop directives are always honored, of course.) This allows inclusion of plain text which looks like mhbuild directives, without causing errors: #off #include <stdio.h> printf("Hello, World!"); #pop Currently the stack depth for the #on/off/pop directives is 32. The "type" directive is used to directly specify the type and subtype of a content. You may only specify discrete types in this manner (can't specify the types multipart or message with this directive). You may optionally specify the name of a file containing the contents in "native" (decoded) format. If this filename starts with the "|" character, then it represents a command to execute whose output is cap- tured accordingly. For example, #audio/basic |raw2audio -F < /usr/lib/sound/giggle.au If a filename is not given, mhbuild will look for information in the user's profile to determine how the different contents should be com- posed. This is accomplished by consulting a composition string, and executing it under /bin/sh, with the standard output set to the con- tent. If the -verbose switch is given, mhbuild will echo any commands that are used to create contents in this way. The composition string may contain the following escapes: %a Insert parameters from directive %f Insert filename containing content %F %f, and stdout is not re-directed %s Insert content subtype %% Insert character % First, mhbuild will look for an entry of the form: mhbuild-compose-type/subtype to determine the command to use to compose the content. If this isn't found, mhbuild will look for an entry of the form: mhbuild-compose-type to determine the composition command. If this isn't found, mhbuild will complain. An example entry might be: mhbuild-compose-audio/basic: record | raw2audio -F Because commands like these will vary, depending on the display envi- ronment used for login, composition strings for different contents should probably be put in the file specified by the MHBUILD environment variable, instead of directly in your user profile. The "external-type" directives are used to provide a MIME reference to a content, rather than enclosing the contents itself (for instance, by specifying an ftp site). Hence, instead of providing a filename as with the type directives, external-parameters are supplied. These look like regular parameters, so they must be separated accordingly. For example, #@application/octet-stream; \ type=tar; \ conversions=compress \ [this is the nmh distribution] \ {attachment; filename="nmh.tar.gz"} \ name="nmh.tar.gz"; \ directory="/pub/nmh"; \ site="ftp.math.gatech.edu"; \ access-type=anon-ftp; \ mode="image" You must give a description string to separate the content parameters from the external-parameters (although this string may be empty). This description string is specified by enclosing it within "[]". A dispo- sition string, to appear in a "Content-Disposition" header, may appear in the optional "{}". These parameters are of the form: access-type= usually "anon-ftp", "mail-server", or "url" name= filename permission= read-only or read-write site= hostname directory= directoryname (optional) mode= usually "ascii" or "image" (optional) size= number of octets server= mailbox subject= subject to send body= command to send for retrieval url= URL of content A minimum "external-type" directive for the url access-type would be as follows: #@application/octet-stream [] access-type=url; \ url="http://download.savannah.gnu.org/releases/nmh/nmh-1.5.tar.gz" Any long URLs will be wrapped according to RFC 2231 rules. The "message" directive (#forw) is used to specify a message or group of messages to include. You may optionally specify the name of the folder and which messages are to be forwarded. If a folder is not given, it defaults to the current folder. Similarly, if a message is not given, it defaults to the current message. Hence, the message di- rective is similar to the forw command, except that the former uses the MIME rules for encapsulation rather than those specified in RFC 934. For example, #forw +inbox 42 43 99 If you include a single message, it will be included directly as a con- tent of type "message/rfc822". If you include more than one message, then mhbuild will add a content of type "multipart/digest" and include each message as a subpart of this content. If you are using this directive to include more than one message, you may use the -rfc934mode switch. This switch will indicate that mhbuild should attempt to utilize the MIME encapsulation rules in such a way that the "multipart/digest" that is created is (mostly) compatible with the encapsulation specified in RFC 934. If given, then RFC 934 compli- ant user-agents should be able to burst the message on recep- tion -- providing that the messages being encapsulated do not contain encapsulated messages themselves. The drawback of this approach is that the encapsulations are generated by placing an extra newline at the end of the body of each message. The "begin" directive is used to create a multipart content. When us- ing the "begin" directive, you must specify at least one content be- tween the begin and end pairs. #begin This will be a multipart with only one part. #end If you use multiple directives in a composition draft, mhbuild will au- tomatically encapsulate them inside a multipart content. Therefore the "begin" directive is only necessary if you wish to use nested multi- parts, or create a multipart message containing only one part. For all of these directives, the user may include a brief description of the content between the "[" character and the "]" character. This description will be copied into the "Content-Description" header when the directive is processed. #forw [important mail from Bob] +bob 1 2 3 4 5 Similarly, a disposition string may optionally be provided between "{" and "}" characters; it will be copied into the "Content-Disposition" header when the directive is processed. If a disposition string is provided that does not contain a filename parameter, and a filename is provided in the directive, it will be added to the "Content-Disposi- tion" header. For example, the following directive: #text/plain; charset=iso-8859-1 <>{attachment} /tmp/summary.txt creates these message part headers: Content-Type: text/plain; charset="iso-8859-1" Content-Disposition: attachment; filename="summary.txt" By default, mhbuild will generate a unique "Content-ID:" for each di- rective, corresponding to each message part; however, the user may override this by defining the ID using the "<" and ">" characters. The -nocontentid switch suppresses creation of all "Content-ID:" headers, even in the top level of the message. Normally mhbuild will choose an appropriate Content-Transfer-Encoding based on the content and the MIME Content-Type. However, you can over- ride that in an mhbuild directive by specifying "*" and the encoding. Acceptable encoding values are "8bit", "qp" (for quoted-printable), and "b64" (for base64 encoding). It should be noted that undesired results may occur if 8bit or quoted-printable is selected for binary content, due to the translation between Unix line endings and the line endings use by the mail transport system. In addition to the various directives, plaintext can be present. Plaintext is gathered, until a directive is found or the draft is ex- hausted, and this is made to form a text content. If the plaintext must contain a "#" at the beginning of a line, simply double it, e.g., ##when sent, this line will start with only one # If you want to end the plaintext prior to a directive, e.g., to have two plaintext contents adjacent, simply insert a line containing a sin- gle "#" character, e.g., this is the first content # and this is the second Finally, if the plaintext starts with a line of the form: Content-Description: text then this will be used to describe the plaintext content. You MUST follow this line with a blank line before starting your text. By default, plaintext is captured as a text/plain content. You can override this by starting the plaintext with "#<" followed by a con- tent-type specification. For example, e.g., #<text/enriched this content will be tagged as text/enriched # and this content will be tagged as text/plain # #<application/x-patch [this is a patch] and this content will be tagged as application/x-patch Note that if you use the "#<" plaintext-form, then the content-descrip- tion must be on the same line which identifies the content type of the plaintext. When composing a text content, you may indicate the relevant character set by adding the "charset" parameter to the directive. #<text/plain; charset=iso-8859-5 If a text content contains any 8-bit characters (characters with the high bit set) and the character set is not specified as above, then mh- build will assume the character set is of the type given by the stan- dard locale(1) environment variables. If these environment variables are not set, then the character set will be labeled as "x-unknown". If a text content contains only 7-bit characters and the character set is not specified as above, then the character set will be labeled as "us-ascii". By default text content with the high bit set is encoded with an 8-bit Content-Transfer-Encoding. If the text has lines longer than the value of -maxunencoded (which defaults to 78) then the text is encoded using the quoted-printable encoding. The -headerencoding switch will indicate which algorithm to use when encoding any message headers that contain 8-bit characters. The valid arguments are base64 for base-64 encoding, quoted for quoted-printable encoding, and utf-8 which requires that all 8-bit header field bodies be encoded as UTF-8 (RFC 6530) and that the message be sent to a SMTP server that supports SMTPUTF8 (RFC 6531). The -autoheaderencoding switch instructs mhbuild to automatically pick the encoding, either base64 or quoted-printable, that results in a shorter encoded string. Putting this all together, here is an example of a more complex message draft, which will expand into a multipart/mixed message containing five parts: To: nobody AT nowhere.org cc: Subject: Look and listen to me! The first part will be text/plain #<text/enriched The second part will be text/enriched # This third part will be text/plain #audio/basic [silly giggle] \ |raw2audio -F < /usr/lib/sounds/giggle.au #image/gif [photo of foobar] \ /home/foobar/lib/picture.gif Integrity Check If mhbuild is given the -check switch, then it will also associate an integrity check with each "leaf" content. This will add a Content-MD5 header field to the content, along with the md5 sum of the unencoded contents, per RFC 1864. This may be used by the receiver of the mes- sage to verify that the contents of the message were not changed in transport. Transfer Encodings After mhbuild constructs the new MIME message by parsing directives, including files, etc., it scans the contents of the message to deter- mine which transfer encoding to use. It will check for 8-bit data, long lines, spaces at the end of lines, and clashes with multipart boundaries. It will then choose a transfer encoding appropriate for each content type. If an integrity check is being associated with each content by using the -check switch, then mhbuild will encode each content with a trans- fer encoding, even if the content contains only 7-bit data. This is to increase the likelihood that the content is not changed while in trans- port. Invoking mhbuild Typically, mhbuild is invoked by the whatnow program. This command will expect the body of the draft to be formatted as an mhbuild compo- sition file. Once you have composed this input file using a command such as comp, forw, or repl, you invoke mhbuild at the "What now" prompt with What now? mime prior to sending the draft. This will cause whatnow to execute mhbuild to translate the composition file into MIME format. Normally it is an error to invoke mhbuild on a file that is already in MIME format. The -auto switch will cause mhbuild to exit without error if the input file already has valid MIME headers. The use of -auto also enables the -nodirectives switch. Finally, you should consider adding this line to your profile: lproc: show This way, if you decide to list after invoking mime, the command What now? list will work as you expect. The -dist switch is intended to be used by dist. It will cause mhbuild to not generate any MIME headers in the composition file (such as "MIME-Version" or "Content-Type"), but it will still encode message headers according to RFC 2047. User Environment Because the environment in which mhbuild operates may vary for a user, mhbuild will look for the environment variable MHBUILD. If present, this specifies the name of an additional user profile which should be read. Hence, when a user logs in on a particular machine, this envi- ronment variable should be set to refer to a file containing defini- tions useful on that machine. Finally, mhbuild will attempt to consult /etc/nmh/mhn.defaults if it exists. See "Profile Lookup" in mh-profile(5) for the profile search order, and for how duplicate entries are treated. Syntax of Composition Files The following is the formal syntax of a mhbuild "composition file". body ::= 1*(content | EOL) content ::= directive | plaintext directive ::= "#" type "/" subtype 0*(";" attribute "=" value) [ "(" comment ")" ] [ "<" id ">" ] [ "[" description "]" ] [ "{" disposition "}" ] [ "*8bit" | "*qp" | "*b64" ] [ filename ] EOL | "#@" type "/" subtype 0*(";" attribute "=" value) [ "(" comment ")" ] [ "<" id ">" ] [ "[" description "]" ] [ "{" disposition "}" ] [ "*8bit" | "*qp" | "*b64" ] external-parameters EOL | "#forw" [ "<" id ">" ] [ "[" description "]" ] [ "{" disposition "}" ] [ "+"folder ] [ 0*msg ] EOL | "#begin" [ "<" id ">" ] [ "[" description "]" ] [ "{" disposition "}" ] [ "alternative" | "parallel" | something-else ] EOL 1*body "#end" EOL plaintext ::= [ "Content-Description:" description EOL EOL ] 1*line [ "#" EOL ] | "#<" type "/" subtype 0*(";" attribute "=" value) [ "(" comment ")" ] [ "[" description "]" ] [ "{" disposition "}" ] [ "*8bit" | "*qp" | "*b64" ] EOL 1*line [ "#" EOL ] line ::= "##" text EOL -- interpreted as "#"text EOL | text EOL FILES mhbuild looks for additional user profile files and mhn.defaults in multiple locations: absolute pathnames are accessed directly, tilde ex- pansion is done on usernames, and files are searched for in the user's Mail directory as specified in their profile. If not found there, the directory "/etc/nmh" is checked. $HOME/.mh_profile The user's profile. $MHBUILD Additional profile entries. /etc/nmh/mhn.defaults System default MIME profile entries. PROFILE COMPONENTS Path: To determine the user's nmh directory. Current-Folder: To find the default current folder. mhbuild-compose-type*: Template for composing contents. SEE ALSO mhlist(1), mhshow(1), mhstore(1) Multipurpose Internet Mail Extensions (MIME) Part One: Format of Inter- net Message Bodies (RFC 2045) Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types (RFC 2046) Multipurpose Internet Mail Extensions (MIME) Part Three: Message Header Extensions for Non-ASCII Text (RFC 2047) Internet Message Format (RFC 5322) MIME Parameter Value and Encoded Word Extensions: Character Sets, Lan- guages, and Continuations (RFC 2231) Proposed Standard for Message Encapsulation (RFC 934) The Content-MD5 Header Field (RFC 1864) Definition of the URL MIME External-Body Access-Type (RFC 2017) Overview and Framework for Internationalized Email (RFC 6530) SMTP Extension for Internationalized Email (RFC 6531) DEFAULTS -autoheaderencoding -contentid -headers -maxunencoded 78 -nocheck -nodisposition -norfc934mode -noverbose -realsize nmh-1.7.1 2016-10-15 MHBUILD(1mh)
Generated by phpMan v3.6.3-2-gc817beb Author: Che Dong Under GNU General Public License
2026-06-08 09:22 @216.73.217.65
CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)