2026-06-08 09:21 @216.73.217.65
CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)
MH-FORMAT(5mh) MH-FORMAT(5mh) NAME mh-format - formatting language for nmh message system DESCRIPTION Several nmh commands utilize either a format string or a format file during their execution. For example, scan uses a format string to gen- erate its listing of messages; repl uses a format file to generate mes- sage replies, and so on. There are a number of scan listing formats available, including nmh/etc/scan.time, nmh/etc/scan.size, and nmh/etc/scan.timely. Look in /etc/nmh for other scan and repl format files which may have been writ- ten at your site. You can have your local nmh expert write new format commands or modify existing ones, or you can try your hand at it yourself. This manual section explains how to do that. Note: some familiarity with the C printf routine is assumed. A format string consists of ordinary text combined with special, multi- character, escape sequences which begin with `%'. When specifying a format string, the usual C backslash characters are honored: `\b', `\f', `\n', `\r', and `\t'. Continuation lines in format files end with `\' followed by the newline character. A literal `%' can be in- serted into a format file by using the sequence `%%'. SYNTAX Format strings are built around escape sequences. There are three types of escape sequence: header components, built-in functions, and flow control. Comments may be inserted in most places where a function argument is not expected. A comment begins with `%;' and ends with a (non-escaped) newline. Component escapes A component escape is specified as `%{component}', and exists for each header in the message being processed. For example, `%{date}' refers to the "Date:" field of the message. All component escapes have a string value. Such values are usually compressed by converting any control characters (tab and newline included) to spaces, then eliding any leading or multiple spaces. Some commands, however, may interpret some component escapes differently; be sure to refer to each command's manual entry for details. Some commands (such as ap(8) and mhl(1)) use a special component `%{text}' to refer to the text being processed; see their respective man pages for details and examples. Function escapes A function escape is specified as `%(function)'. All functions are built-in, and most have a string or integer value. A function escape may take an argument. The argument follows the function escape (and any separating whitespace is discarded) as in the following example: %(function argument) In addition to literal numbers or strings, the argument to a function escape can be another function, or a component, or a control escape. When the argument is a function or a component, the argument is speci- fied without a leading `%'. When the argument is a control escape, it is specified with a leading `%'. Control escapes A control escape is one of: `%<', `%?', `%|', or `%>'. These are com- bined into the conditional execution construct: %< condition format-text %? condition format-text ... %| format-text %> (Extra white space is shown here only for clarity.) These constructs, which may be nested without ambiguity, form a general if-elseif-else- endif block where only one of the format-texts is interpreted. In other words, `%<' is like the "if", `%?' is like the "elseif", `%|' is like "else", and `%>' is like "endif". A `%<' or `%?' control escape causes its condition to be evaluated. This condition is a component or function. For components and func- tions whose value is an integer, the condition is true if it is non- zero, and false if zero. For components and functions whose value is a string, the condition is true it is a non-empty string, and false if an empty string. The `%?' control escape is optional, and can be used multiple times in a conditional block. The `%|' control escape is also optional, but may only be used once. Function escapes Functions expecting an argument generally require an argument of a par- ticular type. In addition to the integer and string types, these in- clude: Argument Description Example Syntax literal A literal number %(func 1234) or string %(func text string) comp Any component %(func{in-reply-to}) date A date component %(func{date}) addr An address component %(func{from}) expr Nothing %(func) or a subexpression %(func(func2)) or control escape %(func %<{reply-to}%|%{from}%>) The date and addr types have the same syntax as the component type, comp, but require a header component which is a date, or address, string, respectively. Most arguments not of type expr are required. When escapes are nested (via expr arguments), evaluation is done from innermost to outermost. As noted above, for the expr argument type, functions and components are written without a leading `%'. Control escape arguments must use a leading `%', preceded by a space. For example, %<(mymbox{from}) To: %{to}%> writes the value of the header component "From:" to the internal reg- ister named str; then (mymbox) reads str and writes its result to the internal register named num; then the control escape, `%<', evaluates num. If num is non-zero, the string "To:" is printed followed by the value of the header component "To:". Evaluation The evaluation of format strings is performed by a small virtual ma- chine. The machine is capable of evaluating nested expressions (as de- scribed above) and, in addition, has an integer register num, and a text string register str. When a function escape that accepts an op- tional argument is processed, and the argument is not present, the cur- rent value of either num or str is substituted as the argument: the register used depends on the function, as listed below. Component escapes write the value of their message header in str. Function escapes write their return value in num for functions return- ing integer or boolean values, and in str for functions returning string values. (The boolean type is a subset of integers, with usual values 0=false and 1=true.) Control escapes return a boolean value, setting num to 1 if the last explicit condition evaluated by a `%<' or `%?' control escape succeeded, and 0 otherwise. All component escapes, and those function escapes which return an inte- ger or string value, evaluate to their value as well as setting str or num. Outermost escape expressions in these forms will print their value, but outermost escapes which return a boolean value do not result in printed output. Functions The function escapes may be roughly grouped into a few categories. Function Argument Return Description msg integer message number cur integer message is current (0 or 1) unseen integer message is unseen (0 or 1) size integer size of message strlen integer length of str width integer column width of terminal charleft integer bytes left in output buffer timenow integer seconds since the Unix epoch me string the user's mailbox (username) myhost string the user's local hostname myname string the user's name localmbox string the complete local mailbox eq literal boolean num == arg ne literal boolean num != arg gt literal boolean num > arg match literal boolean str contains arg amatch literal boolean str starts with arg plus literal integer arg plus num minus literal integer arg minus num multiply literal integer num multiplied by arg divide literal integer num divided by arg modulo literal integer num modulo arg num literal integer Set num to arg. num integer Set num to zero. lit literal string Set str to arg. lit string Clear str. getenv literal string Set str to environment value of arg profile literal string Set str to profile component arg value nonzero expr boolean num is non-zero zero expr boolean num is zero null expr boolean str is empty nonnull expr boolean str is non-empty void expr Set str or num comp comp string Set str to component text compval comp integer Set num to "atoi(comp)" decode expr string decode str as RFC 2047 (MIME-encoded) component unquote expr string remove RFC 2822 quotes from str trim expr trim trailing whitespace from str kilo expr string express in SI units: 15.9K, 2.3M, etc. %(kilo) scales by factors of 1000, kibi expr string express in IEC units: 15.5Ki, 2.2Mi. %(kibi) scales by factors of 1024. putstr expr print str putstrf expr print str in a fixed width putnum expr print num putnumf expr print num in a fixed width putlit expr print str without space compression zputlit expr print str without space compression; str must occupy no width on display bold string set terminal bold mode underline string set terminal underlined mode standout string set terminal standout mode resetterm string reset all terminal attributes hascolor boolean terminal supports color fgcolor literal string set terminal foreground color bgcolor literal string set terminal background color formataddr expr append arg to str as a (comma separated) address list concataddr expr append arg to str as a (comma separated) address list, including duplicates, see Special Handling putaddr literal print str address list with arg as optional label; get line width from num The (me) function returns the username of the current user. The (my- host) function returns the localname entry in mts.conf, or the local hostname if localname is not configured. The (myname) function will return the value of the SIGNATURE environment variable if set, other- wise it will return the passwd GECOS field (truncated at the first comma if it contains one) for the current user. The (localmbox) func- tion will return the complete form of the local mailbox, suitable for use in a "From" header. It will return the "Local-Mailbox" profile en- try if there is one; if not, it will be equivalent to: %(myname) <%(me)@%(myhost)> The following functions require a date component as an argument: Function Argument Return Description sec date integer seconds of the minute min date integer minutes of the hour hour date integer hours of the day (0-23) wday date integer day of the week (Sun=0) day date string day of the week (abbrev.) weekday date string day of the week sday date integer day of the week known? (1=explicit,0=implicit,-1=unknown) mday date integer day of the month yday date integer day of the year mon date integer month of the year month date string month of the year (abbrev.) lmonth date string month of the year year date integer year (may be > 100) zone date integer timezone in minutes tzone date string timezone string szone date integer timezone explicit? (1=explicit,0=implicit,-1=unknown) date2local date coerce date to local timezone date2gmt date coerce date to GMT dst date integer daylight savings in effect? (0 or 1) clock date integer seconds since the Unix epoch rclock date integer seconds prior to current time tws date string official RFC 822 rendering pretty date string user-friendly rendering nodate date integer returns 1 if date is invalid The following functions require an address component as an argument. The return value of functions noted with `*' is computed from the first address present in the header component. Function Argument Return Description proper addr string official RFC 822 rendering friendly addr string user-friendly rendering addr addr string mbox@host or host!mbox rendering* pers addr string the personal name* note addr string commentary text* mbox addr string the local mailbox* mymbox addr integer list has the user's address? (0 or 1) getmymbox addr string the user's (first) address, with personal name getmyaddr addr string the user's (first) address, without personal name host addr string the host domain* nohost addr integer no host was present (0 or 1)* type addr integer host type* (0=local,1=network, -1=uucp,2=unknown) path addr string any leading host route* ingrp addr integer address was inside a group (0 or 1)* gname addr string name of group* (A clarification on (mymbox{comp}) is in order. This function checks each of the addresses in the header component "comp" against the user's mailbox name and any "Alternate-Mailboxes". It returns true if any ad- dress matches. However, it also returns true if the "comp" header is not present in the message. If needed, the (null) function can be used to explicitly test for this case.) Formatting When a function or component escape is interpreted and the result will be printed immediately, an optional field width can be specified to print the field in exactly a given number of characters. For example, a numeric escape like %4(size) will print at most 4 digits of the mes- sage size; overflow will be indicated by a `?' in the first position (like `?234'). A string escape like %4(me) will print the first 4 characters and truncate at the end. Short fields are padded at the right with the fill character (normally, a blank). If the field width argument begins with a leading zero, then the fill character is set to a zero. The functions (putnumf) and (putstrf) print their result in exactly the number of characters specified by their leading field width argument. For example, %06(putnumf(size)) will print the message size in a field six characters wide filled with leading zeros; %14(putstrf{from}) will print the "From:" header component in fourteen characters with trailing spaces added as needed. Using a negative value for the field width causes right-justification within the field, with padding on the left up to the field width. Padding is with spaces except for a left-padded putnumf when the width starts with zero. The functions (putnum) and (putstr) are somewhat special: they print their result in the minimum number of characters required, and ignore any leading field width argu- ment. The (putlit) function outputs the exact contents of the str reg- ister without any changes such as duplicate space removal or control character conversion. Similarly, the (zputlit) function outputs the exact contents of the str register, but requires that those contents not occupy any output width. It can therefore be used for outputting terminal escape sequences. There are a limited number of function escapes to output terminal es- cape sequences. These sequences are retrieved from the terminfo(5) database according to the current terminal setting. The (bold), (un- derline), and (standout) escapes set bold mode, underline mode, and standout mode respectively. (hascolor) can be used to determine if the current terminal supports color. (fgcolor) and (bgcolor) set the fore- ground and background colors respectively. Both of these escapes take one literal argument, the color name, which can be one of: black, red, green, yellow, blue, magenta, cyan, white. (resetterm) resets all ter- minal attributes to their default setting. These terminal escapes should be used in conjunction with (zputlit) (preferred) or (putlit), as the normal (putstr) function will strip out control characters. The available output width is kept in an internal register; any output exceeding this width will be truncated. The one exception to this is that (zputlit) functions will still be executed if a terminal reset code is being placed at the end of a line. Special Handling Some functions have different behavior depending on the command they are invoked from. In repl the (formataddr) function stores all email addresses encoun- tered into an internal cache and will use this cache to suppress dupli- cate addresses. If you need to create an address list that includes previously-seen addresses you may use the (concataddr) function, which is identical to (formataddr) in all other respects. Note that (con- cataddr) does not add addresses to the duplicate-suppression cache. Other Hints and Tips Sometimes, the writer of a format function is confused because output is duplicated. The general rule to remember is simple: If a function or component escape begins with a `%', it will generate text in the output file. Otherwise, it will not. A good example is a simple attempt to generate a To: header based on the From: and Reply-To: headers: %(formataddr %<{reply-to}%|%{from})%(putaddr To: ) Unfortunately, if the Reply-to: header is not present, the output line will be something like: My From User <from AT example.com>To: My From User <from AT example.com> What went wrong? When performing the test for the if clause (%<), the component is not output because it is considered an argument to the if statement (so the rule about not starting with % applies). But the component escape in our else statement (everything after the `%|') is not an argument to anything; it begins with a %, and thus the value of that component is output. This also has the side effect of setting the str register, which is later picked up by the (formataddr) function and then output by (putaddr). The example format string above has another bug: there should always be a valid width value in the num register when (putaddr) is called, otherwise bad formatting can take place. The solution is to use the (void) function; this will prevent the func- tion or component from outputting any text. With this in place (and using (width) to set the num register for the width) a better implemen- tation would look like: %(formataddr %<{reply-to}%|%(void{from})%(void(width))%(putaddr To: ) It should be noted here that the side effects of function and component escapes are still in force and, as a result, each component test in the if-elseif-else-endif clause sets the str register. As an additional note, the (formataddr) and (concataddr) functions have special behavior when it comes to the str register. The starting point of the register is saved and is used to build up entries in the address list. You will find the fmttest(1) utility invaluable when debugging problems with format strings. Examples With all the above in mind, here is a breakdown of the default format string for scan. The first part is: %4(msg)%<(cur)+%| %>%<{replied}-%?{encrypted}E%| %> which says that the message number should be printed in four digits. If the message is the current message then a `+', else a space, should be printed; if a "Replied:" field is present then a `-', else if an "Encrypted:" field is present then an `E', otherwise a space, should be printed. Next: %02(mon{date})/%02(mday{date}) the month and date are printed in two digits (zero filled) separated by a slash. Next, %<{date} %|*%> If a "Date:" field is present it is printed, followed by a space; oth- erwise a `*' is printed. Next, %<(mymbox{from})%<{to}To:%14(decode(friendly{to}))%>%> if the message is from me, and there is a "To:" header, print "To:" followed by a "user-friendly" rendering of the first address in the "To:" field; any MIME-encoded characters are decoded into the actual characters. Continuing, %<(zero)%17(decode(friendly{from}))%> if either of the above two tests failed, then the "From:" address is printed in a mime-decoded, "user-friendly" format. And finally, %(decode{subject})%<{body}<<%{body}>>%> the mime-decoded subject and initial body (if any) are printed. For a more complicated example, consider a possible replcomps format file. %(lit)%(formataddr %<{reply-to} This clears str and formats the "Reply-To:" header if present. If not present, the else-if clause is executed. %?{from}%?{sender}%?{return-path}%>)\ This formats the "From:", "Sender:" and "Return-Path:" headers, stop- ping as soon as one of them is present. Next: %<(nonnull)%(void(width))%(putaddr To: )\n%>\ If the formataddr result is non-null, it is printed as an address (with line folding if needed) in a field width wide, with a leading label of "To:". %(lit)%(formataddr{to})%(formataddr{cc})%(formataddr(me))\ str is cleared, and the "To:" and "Cc:" headers, along with the user's address (depending on what was specified with the "-cc" switch to repl) are formatted. %<(nonnull)%(void(width))%(putaddr cc: )\n%>\ If the result is non-null, it is printed as above with a leading label of "cc:". %<{fcc}Fcc: %{fcc}\n%>\ If a -fcc folder switch was given to repl (see repl(1) for more details about %{fcc}), an "Fcc:" header is output. %<{subject}Subject: Re: %{subject}\n%>\ If a subject component was present, a suitable reply subject is output. %<{message-id}In-Reply-To: %{message-id}\n%>\ %<{message-id}References: %<{references} %{references}%>\ %{message-id}\n%> If a message-id component was present, an "In-Reply-To:" header is out- put including the message-id, followed by a "References:" header with references, if present, and the message-id. As with all plain-text, the row of dashes are output as-is. This last part is a good example for a little more elaboration. Here's that part again in pseudo-code: if (comp_exists(message-id)) then print ("In-reply-to: ") print (message-id.value) print ("\n") endif if (comp_exists(message-id)) then print ("References: ") if (comp_exists(references)) then print(references.value); endif print (message-id.value) print ("\n") endif One more example: Currently, nmh supports very large message numbers, and it is not uncommon for a folder to have far more than 10000 mes- sages. Nonetheless (as noted above) the various scan format strings, inherited from older MH versions, are generally hard-coded to 4 digits for the message number. Thereafter, formatting problems occur. The nmh format strings can be modified to behave more sensibly with larger mes- sage numbers: %(void(msg))%<(gt 9999)%(msg)%|%4(msg)%> The current message number is placed in num. (Note that (msg) is a function escape which returns an integer, it is not a component.) The (gt) conditional is used to test whether the message number has 5 or more digits. If so, it is printed at full width, otherwise at 4 dig- its. SEE ALSO scan(1), repl(1), fmttest(1), CONTEXT None nmh-1.7.1 2015-01-10 MH-FORMAT(5mh)
Generated by phpMan v3.6.3-2-gc817beb Author: Che Dong Under GNU General Public License
2026-06-08 09:21 @216.73.217.65
CrawledBy Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)