info > FLOCK(1)

man perldoc info pydoc3 ri search

🔒 NAME

flock - manage locks from shell scripts

🚀 Quick Reference

Use Case	Command	Description
💎 Exclusive lock (default)	flock /tmp -c command	Lock a file or directory before running a command; waits if busy.
🔗 Shared (read) lock	flock -s /tmp -c command	Allow multiple readers; exclusive lock blocks until all shared locks released.
⏱️ Non‑blocking attempt	flock -n /tmp -c command	Fail immediately if lock is held; exit code 1 (or custom via -E).
⏳ Timeout	flock -w 0.5 /tmp -c command	Wait at most 0.5 seconds; exit code 1 if timeout reached.
🔓 Unlock	flock -u /tmp	Explicitly drop a lock (usually not needed; lock releases on file close).
📂 Lock via file descriptor	exec 4>/var/lock/mylockfile; flock -n 4	Lock without spawning a subprocess; useful for background scripts.
🔄 Self‑locking script	#!/bin/bash [ ${FLOCKER} != $0 ] && exec env FLOCKER="$0" flock -en $0 $0 $@	Boilerplate to prevent multiple instances of the same script.

📖 SYNOPSIS

flock [options] file|directory command [arguments]
flock [options] file|directory -c command
flock [options] number

📝 DESCRIPTION

This utility manages flock(2) locks from within shell scripts or from the command line.

The first and second of the above forms wrap the lock around the execution of a command, in a manner similar to su(1) or newgrp(1). They lock a specified file or directory, which is created (assuming appropriate permissions) if it does not already exist. By default, if the lock cannot be immediately acquired, flock waits until the lock is available.

The third form uses an open file by its file descriptor number. See the examples below for how that can be used.

⚙️ OPTIONS

-c, --command command 📝 Pass a single command, without arguments, to the shell with -c. -E, --conflict-exit-code number 🚫 The exit status used when the -n option is in use, and the conflicting lock exists, or the -w option is in use, and the timeout is reached. The default value is 1. The number has to be in the range of 0 to 255. -F, --no-fork 🔀 Do not fork before executing command. Upon execution the flock process is replaced by command which continues to hold the lock. This option is incompatible with --close as there would otherwise be nothing left to hold the lock. -e, -x, --exclusive 🔒 Obtain an exclusive lock, sometimes called a write lock. This is the default. -n, --nb, --nonblock ⏩ Fail rather than wait if the lock cannot be immediately acquired. See the -E option for the exit status used. -o, --close 🔒 Close the file descriptor on which the lock is held before executing command. This is useful if command spawns a child process which should not be holding the lock. -s, --shared 🔗 Obtain a shared lock, sometimes called a read lock. -u, --unlock 🔓 Drop a lock. This is usually not required, since a lock is automatically dropped when the file is closed. However, it may be required in special cases, for example if the enclosed command group may have forked a background process which should not be holding the lock. -w, --wait, --timeout seconds ⏳ Fail if the lock cannot be acquired within seconds. Decimal fractional values are allowed. See the -E option for the exit status used. The zero number of seconds is interpreted as --nonblock. --verbose 📢 Report how long it took to acquire the lock, or why the lock could not be obtained. -V, --version ℹ️ Display version information and exit. -h, --help ❓ Display help text and exit.

🚪 EXIT STATUS

The command uses <sysexits.h> exit status values for everything, except when using either of the options -n or -w which report a failure to acquire the lock with an exit status given by the -E option, or 1 by default. The exit status given by -E has to be in the range of 0 to 255.

When using the command variant, and executing the child worked, then the exit status is that of the child command.

💡 EXAMPLES

Note that "shell> " in examples is a command line prompt.

shell1> flock /tmp -c cat; shell2> flock -w .007 /tmp -c echo;
/bin/echo $?

🔒 Set exclusive lock to directory /tmp and the second command will fail.

shell1> flock -s /tmp -c cat; shell2> flock -s -w .007 /tmp -c echo;
/bin/echo $?

🔗 Set shared lock to directory /tmp and the second command will not fail. Notice that attempting to get exclusive lock with second command would fail.

shell> flock -x local-lock-file echo 'a b c'

🔒 Grab the exclusive lock "local-lock-file" before running echo with 'a b c'.

(; flock -n 9 || exit 1; # ... commands executed under lock ...; )
9>/var/lock/mylockfile

📁 The form is convenient inside shell scripts. The mode used to open the file doesn't matter to flock; using > or >> allows the lockfile to be created if it does not already exist, however, write permission is required. Using < requires that the file already exists but only read permission is required.

[ ${FLOCKER} != $0 ] && exec env FLOCKER="$0" flock -en $0 $0 $@ ||

🔄 This is useful boilerplate code for shell scripts. Put it at the top of the shell script you want to lock and it'll automatically lock itself on the first run. If the env var $FLOCKER is not set to the shell script that is being run, then execute flock and grab an exclusive non-blocking lock (using the script itself as the lock file) before re-execing itself with the right arguments. It also sets the FLOCKER env var to the right value so it doesn't run again.

shell> exec 4<>/var/lock/mylockfile; shell> flock -n 4

📂 This form is convenient for locking a file without spawning a subprocess. The shell opens the lock file for reading and writing as file descriptor 4, then flock is used to lock the descriptor.

👥 AUTHORS

H. Peter Anvin <hpa AT zytor.com>

©️ COPYRIGHT

Copyright (C) 2003-2006 H. Peter Anvin. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

🔗 SEE ALSO

flock(2)

🐛 REPORTING BUGS

For bug reports, use the issue tracker at https://github.com/karelzak/util-linux/issues.

📦 AVAILABILITY

The flock command is part of the util-linux package which can be downloaded from Linux Kernel Archive <https://www.kernel.org/pub/linux/utils/util-linux/>.

🔒 NAME 🚀 Quick Reference 📖 SYNOPSIS 📝 DESCRIPTION ⚙️ OPTIONS 🚪 EXIT STATUS 💡 EXAMPLES 👥 AUTHORS ©️ COPYRIGHT 🔗 SEE ALSO 🐛 REPORTING BUGS 📦 AVAILABILITY