pwmconfig - phpMan

PWMCONFIG(8)                                                      PWMCONFIG(8)



NAME
       pwmconfig - tests the PWM outputs of sensors and configures fancontrol


SYNOPSIS
       pwmconfig


DESCRIPTION
       pwmconfig searches your sensors for pulse width modulation (PWM) controls, and test
       each one to see if it controls a fan on your motherboard. Note  that  many  mother-
       boards  do not have PWM circuitry installed, even if your sensor chip supports PWM.

       It attempts to briefly stop each fan using the PWM controls. It  then  attempts  to
       restore  each  fan  to full speed after testing. However, it is very important that
       you physically verify that the fans have been returned to full speed after the pro-
       gram has completed.


WARNING
       This  program will stop your fans, one at a time, for approximately 5 seconds each.
       This may cause your processor temperature to rise. Verify that all fans are running
       at normal speed after this program has exited.


CONFORMING TO
       lm_sensors-2.x


SEE ALSO
       fancontrol(8), sensors(1).


AUTHOR
       Marius Reiner <marius.reiner AT hdev.de>



                               January 27, 2005                   PWMCONFIG(8)

Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache/1.3.41 (Unix) PHP/5.2.5 mod_perl/1.30 mod_gzip/1.3.26.1a
Under GNU General Public License
2009-01-10 10:49 @38.103.63.58 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)