On Apache/1.3.41 (Unix) PHP/5.2.5 mod_perl/1.30 mod_gzip/1.3.26.1a
Under GNU General Public License
2009-01-09 08:03 @38.103.63.58 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)
LDAPMODIFY(1) LDAPMODIFY(1)
NAME
ldapmodify, ldapadd - LDAP modify entry and LDAP add entry tools
SYNOPSIS
ldapmodify [-a] [-c] [-S file] [-n] [-v] [-k] [-K] [-M[M]] [-d debuglevel]
[-D binddn] [-W] [-w passwd] [-y passwdfile] [-H ldapuri] [-h ldaphost] [-p ldap-
port] [-P 2|3] [-O security-properties] [-I] [-Q] [-U authcid] [-R realm] [-x]
[-X authzid] [-Y mech] [-Z[Z]] [-f file]
ldapadd [-c] [-S file] [-n] [-v] [-k] [-K] [-M[M]] [-d debuglevel] [-D binddn] [-W]
[-w passwd] [-y passwdfile] [-h ldaphost] [-p ldapport] [-P 2|3] [-O security-prop-
erties] [-I] [-Q] [-U authcid] [-R realm] [-x] [-X authzid] [-Y mech] [-Z[Z]]
[-f file]
DESCRIPTION
ldapmodify is a shell-accessible interface to the ldap_modify(3) and ldap_add(3)
library calls. ldapadd is implemented as a hard link to the ldapmodify tool. When
invoked as ldapadd the -a (add new entry) flag is turned on automatically.
ldapmodify opens a connection to an LDAP server, binds, and modifies or adds
entries. The entry information is read from standard input or from file through
the use of the -f option.
OPTIONS
-a Add new entries. The default for ldapmodify is to modify existing entries.
If invoked as ldapadd, this flag is always set.
-c Continuous operation mode. Errors are reported, but ldapmodify will con-
tinue with modifications. The default is to exit after reporting an error.
-S file
Add or change records which where skipped due to an error are written to
file and the error message returned by the server is added as a comment.
Most useful in conjunction with -c.
-n Show what would be done, but don’t actually modify entries. Useful for
debugging in conjunction with -v.
-v Use verbose mode, with many diagnostics written to standard output.
-k Use Kerberos IV authentication instead of simple authentication. It is
assumed that you already have a valid ticket granting ticket. You must com-
pile with Kerberos support for this option to have any effect.
-K Same as -k, but only does step 1 of the Kerberos IV bind. This is useful
when connecting to a slapd and there is no x500dsa.hostname principal regis-
tered with your Kerberos Domain Controller(s).
-F Force application of all changes regardless of the contents of input lines
that begin with replica: (by default, replica: lines are compared against
the LDAP server host and port in use to decide if a replog record should
actually be applied).
-M[M] Enable manage DSA IT control. -MM makes control critical.
-d debuglevel
Set the LDAP debugging level to debuglevel. ldapmodify must be compiled
with LDAP_DEBUG defined for this option to have any effect.
-f file
Read the entry modification information from file instead of from standard
input.
-x Use simple authentication instead of SASL.
-D binddn
Use the Distinguished Name binddn to bind to the LDAP directory.
-W Prompt for simple authentication. This is used instead of specifying the
password on the command line.
-w passwd
Use passwd as the password for simple authentication.
-y passwdfile
Use complete contents of passwdfile as the password for simple authentica-
tion.
-H ldapuri
Specify URI(s) referring to the ldap server(s).
-h ldaphost
Specify an alternate host on which the ldap server is running. Deprecated
in favor of -H.
-p ldapport
Specify an alternate TCP port where the ldap server is listening. Depre-
cated in favor of -H.
-P 2|3 Specify the LDAP protocol version to use.
-O security-properties
Specify SASL security properties.
-I Enable SASL Interactive mode. Always prompt. Default is to prompt only as
needed.
-Q Enable SASL Quiet mode. Never prompt.
-U authcid
Specify the authentication ID for SASL bind. The form of the ID depends on
the actual SASL mechanism used.
-R realm
Specify the realm of authentication ID for SASL bind. The form of the realm
depends on the actual SASL mechanism used.
-X authzid
Specify the requested authorization ID for SASL bind. authzid must be one
of the following formats: dn:<distinguished name> or u:<username>
-Y mech
Specify the SASL mechanism to be used for authentication. If it’s not speci-
fied, the program will choose the best mechanism the server knows.
-Z[Z] Issue StartTLS (Transport Layer Security) extended operation. If you use
-ZZ, the command will require the operation to be successful.
INPUT FORMAT
The contents of file (or standard input if no -f flag is given on the command line)
should conform to the format defined in slapd.replog(5), with the exceptions noted
below.
Lines that begin with "replica:" are matched against the LDAP server host and port
in use to decide if a particular replog record should be applied. Any other lines
that precede the "dn:" line are ignored. The -F flag can be used to force ldapmod-
ify to apply all of the replog changes, regardless of the presence or absence of
any "replica:" lines.
If no "changetype:" line is present, the default is "add" if the -a flag is set (or
if the program was invoked as ldapadd) and "modify" otherwise.
If changetype is "modify" and no "add:", "replace:", or "delete:" lines appear, the
default is "replace" for ldapmodify(1) and "add" for ldapadd(1).
Note that the above exceptions to the slapd.replog(5) format allow ldif(5) entries
to be used as input to ldapmodify or ldapadd.
EXAMPLES
Assuming that the file /tmp/entrymods exists and has the contents:
dn: cn=Modify Me,dc=example,dc=com
changetype: modify
replace: mail
mail: modme AT example.com
-
add: title
title: Grand Poobah
-
add: jpegPhoto
jpegPhoto:< file:///tmp/modme.jpeg
-
delete: description
-
the command:
ldapmodify -f /tmp/entrymods
will replace the contents of the "Modify Me" entry’s mail attribute with the value
"modme AT example.com", add a title of "Grand Poobah", and the contents of the file
"/tmp/modme.jpeg" as a jpegPhoto, and completely remove the description attribute.
Assuming that the file /tmp/newentry exists and has the contents:
dn: cn=Barbara Jensen,dc=example,dc=com
objectClass: person
cn: Barbara Jensen
cn: Babs Jensen
sn: Jensen
title: the world’s most famous mythical manager
mail: bjensen AT example.com
uid: bjensen
the command:
ldapadd -f /tmp/newentry
will add a new entry for Babs Jensen, using the values from the file /tmp/newentry.
Assuming that the file /tmp/entrymods exists and has the contents:
dn: cn=Barbara Jensen,dc=example,dc=com
changetype: delete
the command:
ldapmodify -f /tmp/entrymods
will remove Babs Jensen’s entry.
DIAGNOSTICS
Exit status is zero if no errors occur. Errors result in a non-zero exit status
and a diagnostic message being written to standard error.
SEE ALSO
ldapadd(1), ldapdelete(1), ldapmodrdn(1), ldapsearch(1), ldap.conf(5), ldap(3),
ldap_add(3), ldap_delete(3), ldap_modify(3), ldap_modrdn(3), slapd.replog(5)
AUTHOR
The OpenLDAP Project <http://www.openldap.org/>
ACKNOWLEDGEMENTS
OpenLDAP is developed and maintained by The OpenLDAP Project (http://www.openl-
dap.org/). OpenLDAP is derived from University of Michigan LDAP 3.3 Release.
OpenLDAP 2.2.29 2005/10/04 LDAPMODIFY(1)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache/1.3.41 (Unix) PHP/5.2.5 mod_perl/1.30 mod_gzip/1.3.26.1a
Under GNU General Public License
2009-01-09 08:03 @38.103.63.58 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)