FOOMATIC-GETPJLOPTIONS(8) FOOMATIC-GETPJLOPTIONS(8)
NAME
foomatic-getpjloptions - <put a short description here>
SYNOPSIS
foomatic-getpjloptions device
foomatic-getpjloptions hostname port
DESCRIPTION
foomatic-getpjloptions Sends a set of PJL commands and reads back the PJL options
and status from a printer over a network connection or device bidirectional inter-
face such as parallel, USB, serial. printers to standard output. The output can be
piped into foomatic-addpjloptions to add options to the database.
Options
device The interface to which a local printer is connected, e.g. /dev/lp0,
/dev/usb/lp0, /dev/tty00, etc. For a parallel port, you must have bidi-
rectional support enabled at the BIOS level and the parallel port driver
must support the bidirectional mode. Check your parallel port BIOS set-
tings for EPP/bi-directional mode.
hostname Host name or IP address of a network printer (HP JetDirect, DLINK, etc.).
port Port on which your network printer listens for socket (Appsocket) connec-
tions. Most common ports are 9100 (JetDirect), 10000 (DLINK). Usually
you can configure the port via a configuration interface.
EXIT STATUS
foomatic-getpjloptions returns ???
AUTHOR
Manfred Wassmann <manolo AT NCC-1701.de> for the foomatic project using out-
put from the associated binary. Modified by Patrick Powell <papowell at lprng.com>
to provide betters support for network printers, error messages, and remove CR and
FF from output.
WARNINGS
Uni-directional protocols as remote LPD are not supported as no status is returned.
Some network print servers which attach to a printer parallel port do not support
birectional mode.
Foomatic Project 2001-05-07 FOOMATIC-GETPJLOPTIONS(8)
Generated by $Id: phpMan.php,v 4.55 2007/09/05 04:42:51 chedong Exp $ Author: Che Dong
On Apache/1.3.41 (Unix) PHP/5.2.5 mod_perl/1.30 mod_gzip/1.3.26.1a
Under GNU General Public License
2008-12-02 08:41 @38.103.63.58 CrawledBy CCBot/1.0 (+http://www.commoncrawl.org/bot.html)